Jump to content

domcho

Member
  • Content count

    131
  • Joined

  • Last visited

  • Medals

Community Reputation

13 Good

2 Followers

About domcho

  • Rank
    Sergeant

Contact Methods

  • Skype
    captain_fordo
  • Youtube
    501stadvisor
  • Steam url id
    goshostanka
  1. Just wanted to stop by and say, as a crazy OFP fan, this is looking fantastic!
  2. After half a day spent in oxygen 2 I found out what UV Mapping is so the answer to is yesand is no.Now I am stuck on the config.cpp: http://forums.bistudio.com/showthread.php?188677-Need-help-with-config-cpp-for-an-addon&p=2877800#post2877800
  3. Hello. I've searched the forums and opened existing config.cpps but the more I read the harder it gets. Every config.cpp is different. Some have cfgSomething for example, others don't. My current objective is: add 1 custom unit in the editor. When I open the editor I want to go to OPFOR -> My Faction -> My Men -> My Soldier I use this as a template taken from Binkowski's sample US soldier model since it's the only config that is not as long as the bible: This creates a soldier under BLUFOR -> USMC -> Test Soldier -> Test Soldier What do I have to change so mine looks like OPFOR -> My Faction -> My Men -> My Soldier To start I don't even know how to change the faction. I was thinking of using cfgFactionClasses but this only added more text and thus created chaos in the config.cpp. Also what are those #define commands used for in the beggining, what is cfgPatches, what are those under cfgVehicles: class USMC_Soldier_Base : Soldier {}; class USMC_Soldier : USMC_Soldier_Base {}; class USMC_Soldier_Light : USMC_Soldier {}; The only things that I understand are the model paths. Once again: Side: OPFOR Faction: My Faction Class: My Men Unit: My Soldier I know I am asking simple questions, but this is completely new to me, when I did mission editing I always opened missions and learned from there, back in OFP when I wanted to do something in my mission and didn't know how I would remember on which mission in the campaigns it's done, open the campaign mission observe, study and finally do it in my mission, however it's not the same with the config.cpp, I open one and it's a wall of text I start to study it, then I open another config only to find out it's completely different wall of text with both having the same result in the editor, just different addons. Oh and everytime I do a change, pbo the folder and put it into @myaddon/addons it takes a lot of time for ArmA 2 to load to inspect something after every change (not to mention the countless errors I make inside the config.cpp making the game unable to run). Those things that I am asking are not explained in tutorials and yes I did read this https://community.bistudio.com/wiki/Mondkalb%27s_Addon_Tutorial#Config.cpp I only learned that class CfgVehicleClasses will create the name of my class which will be "My Men". Call me a retard but the information provided for cfgPatches does not help me understand what the cfgPatches command is used for except that the command should have the same name as the @myaddon folder (if I understood this correctly). Thank you I will really appreciate it if you can break those simple things down! Oh and mods (and other people too) please don't be mad for asking simple things, I am struggling hard but it's very confusing, none of the tutorials I read explains each line what it stands for. I can't simply copy-paste an existing cpp and expect it to work, how do I know what to change so it matches to my units.
  4. No... no... NOOOOOOO!!! this exec "suicide.sqf"; I have a few more questions though. How are the paa files such as the skin_co.paa and skin_nohq.paa created for every unit? The BIS sample soldier (which is a normal Russian soldier from ArmA 2) wears a lot of stuff on his body like vest, straps, etc... and he also has some kind of pockets (I don't know how they are called) on his left leg. If I want my soldier to have none of these they will still be present because they exist in the p3d file and also they exist in the skin_nohq.paa and skin_co.paa file. How do I remove them without messing up the normal body? I started studying Oxygen 2 and was able to remove most of the pieces from his chest, but the unique leg pockets are part of the leg and I can't simply delete them, it messes up the whole leg. However, what bothers me most are the paa files which raises the next question: are certain uniform/vest/equipment etc parts of the p3d file bound to certain parts of the paa files so they correspond to them? If I delete the vest will it's texture from the paa file still appear in game on top of his normal clothing that's below the deleted vest? Thanks a lot!
  5. Thank you, I will get on learning the config.cpp right away, however I still don't understand the skin_co.paa and skin_nohq.paa files. Here is something I want to do: I want to put a custom insignia on the left shoulder of my unit by editing the myskin_co.paa but how do I tell which part of the myskin_co.paa picture belongs to the left sleeve of the unit because I have opened various texture files and everyone is different. Some have skin for helmets and hats, others don't etc... I just want to know how is the greyscale and co.paa files made so they match the certain unit's body and how to distinguish the body parts in the myskin_co.paa file because my skin contains lots of straight lines and I have to flip the picture sideways for the hand sleeves and some other body parts in order for them to match properly.
  6. Hello everyone. I decided to make my own addon for units. I have been searching forums and reading FAQs about addon making for almost 2 days now. I just want to ask a few things. So, the addon that I want to make is simply units with custom camouflage uniforms. Nothing else. No vehicles, no weapons. I already saw how to do a basic retexture using a graphic editor program and then use setObjectTexture command but that's just changing the look on existing units. So here is my first question: when making such addon, do I need to make my own custom unit in oxygen? Can I for example use BIS soldier sample and if I can (which I hope because I have no experience with drawing) how can I customize his looks. Basically what has been bothering me mostly is if I have the soldier (BIS sample) how can I configure the way he looks. I don't want him to have a pouch on his waist for example. My second question is about the PAA files containing the skins. Do I have to draw the greyscale myself? The sample one has too many things such as wraps and belt pockets and I don't want mine to have those. How do I know which part of the PAA file containing the camouflage is applied to what body part. When I open up a randomskin_co.paa file there are camouflages all over the place and I don't know which goes where. How is it defined that the top right piece goes to the chest for example or the bottom left one goes to the leg(s)? Those paa pictures, rvmat files and their combination with oxygen are really, really confusing me. Also I read a few tutorials on how to apply the skin to existing model in oxygen but I wasn't able to do it. Please note that I have 0 experience with oxygen and I have no clue on how to draw a human body (I watched Gnat's oxygen tutorials already), this is why I want to use a ready sample of a soldier and only edit minor things (if possible). I apologize if my questions have been answered in previous threads/FAQs, I am completely new to those things and I feel like I am asking how to solve a complicated equation without me even knowing how to count. Thank you very much!
  7. CTI servers

    None of these is the issue :(
  8. CTI servers

    Everything is the same. I can join my game through OFPMonitor or LAN. The hostname, motd, admin password, maximum player slots are the same. Here is what my bat file looks like: REM OPERATION FLASHPOINT RESISTANCE STANDALONE DEDICATED SERVER LAUNCHER REM REM OFPR_Server.exe -nomap -server -config=server.cfg -cfg=server_flashpoint.cfg REM ^^^^^^^^^^ REM REM Name your config file here.
  9. CTI servers

    This worked! Thanks!
  10. CTI servers

    TCP/UDP from 2302 to 2305 are forwarded, even firewall is off. Neither 1.96 nor CWA works :(
  11. CTI servers

    I have played crCTI like 6 or more years ago :D Thank you all! Do you guys know how can I make my own server visible on OFP Monitor? I have a OFPR_Server.exe and a batch file to launch it. I also set reportingIP="213.92.154.12"; but my server does not show on OFP Monitor.
  12. CTI servers

    I see. Thank you. By the way I only see around 20 servers on OFP Monitor and there are only 5-6 that have players. Am I missing something?
  13. CTI servers

    I see now. Thanks. But I am using CWA with Steam. Is that a problem for OFP Monitor? I know I should have patched my original OFP to 1.99 but I like to use is through Steam.
  14. CTI servers

    I did, but there aren't many server, also I can't join all the servers (can't click the join button) and on others I get instantly kicked off once I join them.
  15. CTI servers

    How can I find crCTI or other CTI servers nowadays on CWA? Gamespy is down...
×