WolfK33

That was it! As I said, something dumb on my end... Works fine now, thanks a lot folks ! Happy Greetings, Wolf

Hi all. Game runs fine so far (German version), except TrackIR. My TrackIR 4 is plugged in okay, Software running, all the right lights illuminated,but when I move my head nothing happens. Is there any key I´m maybe missing ? Probably it´s just something dumb on my end... Greets, Wolf

Also same stick same problem. I would love to see any kind of solution, even if its only a "default" return-to-center tension without any FF-effects. So I thought i might take this thread back to the front page. I bet there are more people who own this stick and can´t just afford to buy another one.The more of you write in here the higher the chances somebody comes up with something...

Hmm, he leaves my group now with this command but doesn´t follow his waypoints, he just hovers there... I tried synchronizing his next waypoint with my wp where he leaves me, also with my wp after that one, but he still stays where he is...

Thank you

Okay, it´s an old thread, but it´s almost the same problem that I have. I have a chopper, let´s call him chop2 that I want to join another chopper (chop1), wich works fine using a join-wp for chop2.(chop2 is then Nr.3 in the "squad") But after a couple of waypoints I want chop2 to split with chop1 and follow his own waypoints. So in the "on activation" field of chop1´s waypoint where I want them to split I put : [chop2] join chop2 . But the command that comes out when I preview it is "3 follow 1",not "3 follow 3" and nothing changes, he´s still under my command. ?!?

Ahh ok, I already guessed it´s still in development. Now that I know I can sleep again, I almost went nuts last night looking for that chopper Thanks, Wolf

Hey Folks, I just a some shots of this absolutely incredible bird in another forum : (scroll down a bit to the second post) http://suppressivefire.net/cgibin....pic=449 Does anybody know where I can get this thing ? I searched all known OFP-Sites and did a Google-search, but nothing. Or is it maybe not available to the public for now? Argh, I need this thing ! Please !! Â

Hmm, think I´m gonna do that,thanks, but not before next month Any suggestions on the AGP-settings? Thats one bios item I don´t know very much about. Right now I use AGP 4x and AGP Aperture Size 128 MB...

Hmm, I don´t know anything about mission editing, but as nobody else answers maybe this helps: I heard about a "knowsabout" command, like " ´sniper1´ knowsabout ´ruskieonthestreet´ ", maybe if you find more information about that command in a command reference this may help you. greetings, Wolf

Reporting: Problem solved ! The problem was that I´m a stupid idiot and therefore used my old PC 100 ( !! ) ram with the new gear. I bought 256 MB DDR today and everything runs fine.Maybe a little choppy but without crashing, and I think I maybe can get rid of the choppiness by expermenting a little with AGP aperture settings and stuff or just live with it. Boonie Rat, when your tip came I already did the reinstall, so I didn´t try that, but thank you. I think I´ll still do the bios-update, but I think for now its "Never touch a running system"... So thank´s a lot for the help, guys! Keep your heads down out there   Greetings, Wolf

Hmm, the Bios is one thing I didn´t think about at all.Maybe because it´s a "new" board...But who knows for how long that thing was getting dusty in that shop, because my version is 1004. So if you use 1011 and are fine with it I think I´m gonna update it tomorrow, although that´s one thing I´m always a little "afraid" of...As I said, I´m not THAT firm with computers.. What I´m gonna do now is "swap" my harddrives (had the small old 2gig as c: with just windows on it and a 13,6gig as d: with games and stuff), and install WinME on the big one, now as "c:", so I can let Windows handle the virtual mem and still have a lot of it, and use the small one as a storage place for "stuff". I think I should´ve done this a long time ago. Oh, and with this install I´m only gonna use ali_agp 1.90, not the ide stuff , at least for testing. I´m gonna report how it works out,and tx for the help again.

Ah finally somebody No, just that one CD-Rom drive. And I upgraded the System after getting Resistance.I could play it without problems with the old gear, well just a little slow and choppy from time to time, that´s why I got the new board and CPU. All the other components are the same I used before. And thanks for answering !

Hmm, nobody ? In the meantime I did another format c: and reinstall of WinMe, installed OFP, GoldUpgrade and Resistance from scratch, let Windows handle the VirtualMem, handled it "myself" again, took out my soundcard completely, let Resistance run with minimum settings on everything, like 320*200*16 lowest viewdistance etc (looks funny ) , put in another graphicscard (GF2MX from Asus), and because there was nothing more to upgrade "downgraded" DirectX from 8.1 to 8.0 from the Resistance-CD using DXBuster and a Reg-Cleaner and used older graphicscard drivers. And still absolutely no success. The same problem persists.

Hello everybody. Since I upgraded my system from an Athlon 600 to an Athlon 1400 I always get CTD´s in Resistance after a few seconds or minutes of playing. I never had any such problems with my old gear, wich was the same except Mainboard and CPU. I now have: Athlon 1400 A7A266 Mainbord, newest drivers (Ali_i107, including ali agp 1.90) 256 MB SDRam CreativeLabs 3dblaster Geforce 2 MX 32MB DDR (29.42 det.) Soundblaster Live!Player 1024 Virtual Mem on drive D: , where OFP is also installed, set to min.1024, max "the rest" which is about 6 gig Win ME I tried all possible settings with agp 1x to 4x, with all posibble agp aperture sizes up to 256 MB.With some settings I can play a little longer, like 2 minutes, with others i crashes immediately after mission start. Maybe two typical entries form the flashpoint.rpt can help anybody who knows more about computers than I: ===================================================================== == D:\OPERATIONFLASHPOINT\FLASHPOINTRESISTANCE.EXE ===================================================================== Exe version: Sat Jun 29 19:23:24 2002 file:   cur_sp world:   noe campaign: battle:  mission:  Exception code: C0000005 ACCESS_VIOLATION Version 1.75 Fault address:  005D09BE 0101CF9BE D:\OPERATIONFLASHPOINT\FLASHPOINTRESISTANCE.EXE Prev. code bytes: 48 10 80 F9 7F 74 31 0F BE D1 8B 48 08 8B 71 54 Fault code bytes: 8B 5C 96 3C 85 DB 74 20 80 78 12 02 75 1A 85 C9 Registers: EAX:165C3270 EBX:1351C430 ECX:13532900 EDX:00000002 ESI:BF15E5FA EDI:00000034 CS:EIP:018705D09BE SS:ESP:018F:009FF8C8  EBP:102A1B24 DS:018F  ES:018F  FS:0BDF  GS:0000 Flags:00010293 ======================================================= ===================================================================== == D:\OPERATIONFLASHPOINT\FLASHPOINTRESISTANCE.EXE ===================================================================== Exe version: Sat Jun 29 19:23:24 2002 file:   cur_sp world:   noe campaign: battle:  mission:  Exception code: C0000005 ACCESS_VIOLATION Version 1.75 Fault address:  005E89C0 0101E79C0 D:\OPERATIONFLASHPOINT\FLASHPOINTRESISTANCE.EXE Prev. code bytes: 36 01 00 00 0F 94 C0 C3 EB 09 3B 4C 24 04 74 0C Fault code bytes: 8B 49 1C 85 C9 75 F3 32 C0 C2 04 00 B0 01 EB F9 Registers: EAX:10252200 EBX:16A99050 ECX:20113011 EDX:3E554400 ESI:10539C28 EDI:006FAC70 CS:EIP:018705E89C0 SS:ESP:018F:009FF5B8  EBP:009FF694 DS:018F  ES:018F  FS:0B87  GS:0000 Flags:00010206 ======================================================= I hope somebody can help. If there´s anything else you have to know tell me please. The funny thing is, I just bought the new gear to be able to play OFP better, now I can´t play at all...  EDIT: I didn´t put those smilies in that flashpoint.rpt stuff, don´t know how to get rid of them...