Pboproject error 'clutter is not defined'

[solviper 27]

When I go to crunch it fails due to this error, not really sure where to start.

Pic

cfgClutter.hpp

class Clutter
{
	class DefaultClutter;
	class grass_green_clutter: DefaultClutter
	{
		model = "A3\Plants_F\Clutter\c_GrassGreen_GroupSoft.p3d";
		affectedByWind = 0.0;
		swLighting = 0;
		scaleMin = 0.3;
		scaleMax = 1.0;
	};
};

cfgSurfaces.hpp

class CfgSurfaces
{
	class Default{};
	class grass_green_surface: Default
	{
		files = "grass_green_*";
		character = "grass_green_clutter";
		soundEnviron = "grass";
		soundHit = "soft_ground";
		rough = 0.08;
		maxSpeedCoef = 0.9;
		dust = 0.15;
		lucidity = 4;
		grassCover = 0.05;
		impact = "hitGroundSoft";
	};
	class concrete_surface: Default
	{
		files = "concrete_*";
		character = "Empty";
		soundEnviron = "concrete";
		soundHit = "concrete";
		rough = 0.05;
		maxSpeedCoef = 1;
		dust = 0.15;
		lucidity = 0.3;
		grassCover = 0.0;
		impact = "hitConcrete";
	};
	class dirt_surface: Default
	{
		files = "dirt_*";
		character = "Empty";
		soundEnviron = "dirt";
		soundHit = "soft_ground";
		rough = 0.09;
		maxSpeedCoef = 0.9;
		dust = 0.5;
		lucidity = 1;
		grassCover = 0.03;
		impact = "hitGroundSoft";
	};
	class mud_surface: Default
	{
		files = "mud_*";
		character = "MudClutter";
		soundEnviron = "dirt";
		soundHit = "soft_ground";
		rough = 0.15;
		maxSpeedCoef = 0.85;
		dust = 0.32;
		lucidity = 1.5;
		grassCover = 0.04;
		impact = "hitGroundHard";
	};
};

class cfgSurfaceCharacters
{
	class grass_green_clutter
	{
		// how much stuff from the clutters will be placed,
		// so in this case 3 numbers representing the 3 names on next line.
		probability[] = {0.95,0.01,0.01,0.01};
		names[] = {"StrGrassGreenGroup","StrThornGreenSmall","StrThornGreenBig","StrPlantGreenShrub"};
	};
};

UPDATE: Viewing the output has given me this error:

0:36:24: Error while inserting texture "data\satellite.paa" to TextureHeaderManager - failed to read the texture.
0:36:24: Failed adding texture op4_vtc\data\satellite.paa to texture header manager.

??

[m1lkm8n 410]

What do you use to pack the terrain?

 

addon builder or pboproject

[hoverguy 177]

Hello @solviper

 

DefaultClutter class has to be declared outside of the Clutter config class.

Your CfgSurfaces & CfgSurfaceCharacters have to be defined outside of the CfgWorlds config class.

 

config.cpp example

class CfgWorlds
{
    class YourTerrain
    {
        // Stuff

        class DefaultClutter; // <---- Default clutter definition here
        #include "cfgClutter.hpp" // <---- Clutter config here
    };
};

#include "cfgSurfaces.hpp" // <---- Surfaces & Surface characters configs here

cfgClutter.hpp

class Clutter 
{ 
    // Removed DefaultClutter
    class grass_green_clutter: DefaultClutter 
    { 
        model = "A3\Plants_F\Clutter\c_GrassGreen_GroupSoft.p3d"; 
        affectedByWind = 0.0; 
        swLighting = 0;
        scaleMin = 0.3; 
        scaleMax = 1.0; 
    }; 
};

 

[solviper 27]

I did what you said and am still getting the same error.

 

But then it says to view outputs which gives me a completely different error. 

19:01:33: Error while inserting texture "data\satellite.paa" to TextureHeaderManager - failed to read the texture.
19:01:33: Failed adding texture op4_vtc\data\satellite.paa to texture header manager.

Here is the full log:

https://pastebin.com/LgiFjKdy

[m1lkm8n 410]

Can you please post your main island config. The clutter config. And the surfaces config via pastbin please

[solviper 27]

config.cpp

https://pastebin.com/0RsQ0WET

 

cfgSurfaces.hpp

https://pastebin.com/DcqFYwSg

 

cfgClutter.hpp

https://pastebin.com/5hkp2482

[m1lkm8n 410]

First thing I would do is scrap that main config and grab one from pmc wiki..or when I get on the main computer later I can even post one for you. That config is way to long and most of the stuff is not needed if you inherit properly from an already stock a3 island like stratis or altis. 

 

Next. Start using tags. For your wrp...the clutter...ground surface files...everything. It will stop your stuff from overwriting the a3 stuff.  For instance. 

 

grass_green_clutter which is stock a3....should be yourtag_grass_green_clutter

 

you do that for everything.  Head over to ofpec.com and register your tag. 

 

Next in the cfgsurfaces you have         probability[] = {0.95,0.01,0.01,0.01};

names[] = {"grass_green_clutter"};

 

however under probability that is suggesting you have 4 different clutter types but you only have one listed. So change it to this....

 

probability[] = {0.95};

names[] = {"grass_green_clutter"};

 

or add add three more clutter types. Of course you will need to add more definitions in the clutter list if you do that. 

[RoF 239]

Did a post on this the other day, might be of some help

 

[solviper 27]

Just wanted to say thanks, I followed everyone's advice and got it to work again.