Jump to content

Recommended Posts

escape_banner_small.png



The mission
In this mission you and your squad was send out to scout the military presence on an enemy island in preparation for an invasion. But your squad got captured by local layalists and you are now held in an improvised prison awaiting enemy officers to arrive for questioning. But friendly insurgent managed to hide a backpack with weapons in your improvised prison. Your task is now to overwhelm the guards, escape the prison, find a map of the island, make contact with your HQ, reach the designated evacuation zone and escape the enemy island!

The mission is fully dynamic. Every playthrough will be different. Also the mission is quite hard to beat completly. You will definitly fail at the first try. But the mission is meant to be played more than once (infact our squad plays it serveral times the week).


About the mission

Escape was first devloped by Engima of Östgöta Ops. for ArmA2.
At that time me (NeoArmageddon) and Scruffy ported the mission to different islands and began customizing the mission.
When ArmA3 was released, Vormulac and HyperZ made the effort to port the mission over to ArmA3. From that point on Scruffy and me improved and fixed the mission to the current state.
Most of the scripts are replaced and were updated to A3 standards (but there is still some more room for improvements).

The the official version of this release is 1.8.1


Terrains and Mods
We ported the mission to the following terrains:

 

For A2 terrains AiA TP works but I strongly suggest using the newer CUP TP!

 

 

Also there are serveral flavours of the mission with different unit sets. At the moment there is a version without any mods called "Vanilla" (except the terrain you are on)
and the following mods:
RHS

CUP

IFA3

IFA3 + LEN
We tried to compose a unitset for every terrain that match the scenery.

We plan to add more mods and terrains in the future but we also want to release the tools to port the mission.


Release notes
To port this missions with more than 11 different mod setups to more than 29 terrains (overall we have produced 194 missions) we used an autocompiler that merges one codebase and the different config files.
With this huge amount of mission we were not able to check every mission. When one of the missions seems to behave different (broken start, missing units, etc) please post the missionname here in the thread
and we will fix the problem ASAP.

 

This mission was build for dedicated server use! I will not guarantee it will work in SP or locally hosted servers!


Download Mirrors

Complete Pack 1.8.1 Hotfix (recommended)

co10 Escape (Complete) 1.8.1

 

Addon Release 1.8.1 Hotfix

AddOn Steam Workshop Release 1.8.1 Vanilla

 

Complete Pack 1.8.0

co10 Escape (Complete) 1.8.0

 

Complete Pack 1.7.5 @ Armaholic
Armaholic Mirror (Version 1.7.5)

 

Complete Pack 1.7.5
co10 Escape (Complete) 1.7.5

 

1th of April Version:
Version 1.7 EE (co10_Escape_EE.Altis.pbo)

 

Bleeding Edge/Nightly Version:

 

You can find the devlopment builds via browser here: ftp://escape@anzp.de
Or with an FTP program of your choice (server anzp.de, user: escape, password: none).
A changelog is included in every build.
 
Keep in mind that the versions that are builded automatically are considered bleeding edge versions. That means the changes are completely untested (actually we use those versions for our internal tests), may break the mission, arma, your PC or even the world. When you use this versions, make sure to read the changelog and contribute feeback and bugreports.
 

Changelog from 1.8.1

 

Git Changelog for co10 Escape


## [fe8d0ca2334af63] by NeoArmageddon - 2017-07-29 19:49:48

Finish 1.8.1


## [7544b194d9ee3ce] by NeoArmageddon - 2017-07-29 19:18:29

Changed version number to 1.8.1


## [3796d4d42810a0d] by NeoArmageddon - 2017-07-29 19:10:48

-Changed a few mission names to properly reflect their setup
-Added "Addons" config


## [98ac494a5b4672e] by Scruffy - 2017-07-29 19:09:33

-added missing side placeholder for build script on Al Rayak, broke mission if player was on side east


## [7d989084e215eac] by Scruffy - 2017-07-29 19:09:22

-deleted resistance alliances from all mission.sqms


## [d48df7de3743233] by Scruffy - 2017-07-29 19:06:09

-added more debug info to .rpt from all extraction scripts
-changed handling of extraction for normal/close/far parameter


## [9b162c687a9c047] by Scruffy - 2017-07-29 19:06:09

-missing brackets )


## [fb63608fe73d195] by NeoArmageddon - 2017-07-13 17:51:45

Finish 1.8.0


## [525921f2fc1b3f2] by Scruffy - 2017-07-02 21:41:38

-updated readme for 1.8 release


## [4004ee6140e4ca0] by Scruffy - 2017-07-02 20:51:54

- fixed name for IFA3 + LEN


## [30e2588d9ad13af] by NeoArmageddon - 2017-07-02 20:32:00

Disabled debuging info for release


## [67bccbe0619f756] by Scruffy - 2017-07-02 17:14:26

-added new CUP version: RU vs US Army desert + ION


## [47eb98fea2310fd] by Scruffy - 2017-06-28 20:21:22

-added IFA3 and IFA3+LEN versions and some fixes to them (thanks to Nils5940 and The SurvivorOfZeds)


## [107f7c46fdf4ffc] by Scruffy - 2017-06-10 14:19:13

-added WW2 test versions (IFA3+more needed) thanks to The SurvivorOfZeds


## [ef5d046fc7c96d2] by Scruffy - 2017-06-10 12:54:21

-RHS Lingor3 Zombie version was built with wrong mission.sqm (without Zombies...)


## [b06be4266292b76] by Scruffy - 2017-06-07 15:30:02

-fixed extraction spawn markers for Malden 2035


## [2a0de872d445ac9] by Scruffy - 2017-06-06 14:17:08

-fixed Malden 2035 mission.sqm
-added more villagemarkers to Malden 2035


## [6e61062bfbdcbfd] by NeoArmageddon - 2017-06-04 08:46:02

Added more RPT debugging to extraction and added a chat notification about successful smoke throw.


## [3ce03940dc8d02b] by NeoArmageddon - 2017-06-04 08:30:31

Fixed an error with loudspeaker object


## [b10c5311761d664] by Scruffy - 2017-06-03 21:26:35

very dumb


## [795e04e401bc017] by Scruffy - 2017-06-03 21:14:48

im dumb


## [1202964959a49ad] by Scruffy - 2017-06-03 15:20:07

arrrrrrrr


## [ac2b7f3eb50a2f5] by Scruffy - 2017-06-03 15:15:09

stupid snakes


## [b8094603247b8e2] by Scruffy - 2017-06-03 15:00:42

-fixed double " on everon markerfiles
-added Malden 2035 port (thanks to supercereal4)


## [8935af382aaf0d8] by NeoArmageddon - 2017-05-18 18:01:01

Fixed a typo in Heli Com Msg (Thanks DPM)


## [acb4c2c6af6efe0] by NeoArmageddon - 2017-05-12 20:38:39

Motorpools are now enabled by default


## [86fb10aad3b30e4] by NeoArmageddon - 2017-05-12 20:38:39

FindSpawnRoad now returns objNull if no road was found
Fixed a typo preventing all Roadbased surprises to fail
Added specific spawn distances to Stratis


## [7b5e4f100dea868] by NeoArmageddon - 2017-05-12 20:38:39

Turned debug info for artillery and knownPositions on to trace some problems.


## [8b5b3321acf19da] by Scruffy - 2017-05-12 19:25:45

-removing more NVG classnames at start


## [f676c4c91da6ca5] by NeoArmageddon - 2017-05-07 20:18:04

Added check to prevent unconscious player from floating in the air sometimes


## [7b65cb23c38d630] by NeoArmageddon - 2017-05-07 20:17:42

Made CrashSide marker hidden again (was enabled for testing)


## [09aa57b1e101f7b] by NeoArmageddon - 2017-05-07 19:38:48

Fixed a missing underscore.


## [d1c692a476eff10] by Scruffy - 2017-05-07 19:06:37

-changed searchChopper arrays (light = unarmed, heavy = armed, no more gunships)


## [cba41b11a51cdab] by NeoArmageddon - 2017-05-07 19:02:06

Elevated Version number to 1.8 RC1


## [19e4b8c13b441ba] by NeoArmageddon - 2017-05-07 18:50:34

Fixed a missing bracket


## [f211c0194b87852] by NeoArmageddon - 2017-05-07 18:34:33

T70: Added Fire/Smoke FX script, updated include/functions.hpp, updated fn_CrashSite.sqf


## [e82eea5daba390d] by NeoArmageddon - 2017-05-07 17:57:51

Added compiler config for simple test case on Stratis


## [8f0f3964704f363] by NeoArmageddon - 2017-05-07 17:57:33

Added config for Visual Studio Code


## [2e08de21b831c09] by NeoArmageddon - 2017-05-07 17:57:12

Forgot to add fn_bootstrap.sqf


## [b4b4b46f0b28e64] by NeoArmageddon - 2017-05-07 17:23:53

Added boodstrap-function. Yet unused.
Added RemoteExec ext definition (withd efault values).


## [42bb1c296ca877c] by NeoArmageddon - 2017-05-07 17:23:16

Removed terrain objects are now correctly broadcasted to JIP clients.


## [bae4fdcdd0536f8] by NeoArmageddon - 2017-05-07 17:22:55

Added Failsafe-check for HSC Revive text. May trigger faster than dialog creation.


## [f0f3bd2bfc6fa66] by NeoArmageddon - 2017-05-07 17:22:19

Added failsafe for broken "knownPositions". Should keep an eye on this.


## [c1adaf1e557880e] by NeoArmageddon - 2017-05-07 17:21:38

Fixed JIP spawn. Should now behave as intended.


## [f231e617093ab83] by NeoArmageddon - 2017-05-07 14:05:06

Added additional variable check for HSC exit


## [4bc51086f923fe0] by Scruffy - 2017-05-04 14:20:57

-fixed Motorpool spawn I broke (was spawned twice for each location)


## [8028fdaae68ce75] by NeoArmageddon - 2017-03-05 17:53:02

Increased pullout action (again) condition check.


## [1fdcadc9d70602c] by Scruffy - 2017-02-27 19:58:06

arr


## [9a781ad1e1e8681] by Scruffy - 2017-02-27 19:45:17

-added Dingor


## [46fab2c12e633bf] by Scruffy - 2017-02-03 12:05:35

-added Everon


## [39a8f1c05dec5ab] by Scruffy - 2017-01-29 21:07:45

-transfered Neos fix for extraction to boats (fixes T123)


## [be373c2e1a84339] by NeoArmageddon - 2017-01-29 19:10:16

Attempt in fixing extraction helis not starting when all players are aboard


## [64db4a3c9af8d39] by Scruffy - 2017-01-28 21:21:25

-added possibility for boat extraction (see T122), not finished


## [133a5cc34bfbb32] by Scruffy - 2017-01-28 19:27:18

-fixed check for old object


## [3d8a3846ca4928e] by Scruffy - 2017-01-28 19:00:14

-added second "Land_HelipadEmpty_F" to spawn at extraction position for second helicopter


## [cd757e5f50dd2d1] by Scruffy - 2017-01-26 21:20:50

fixed check if both extraction helis are down


## [91c3c44d0d1aa7e] by Scruffy - 2017-01-26 21:14:31

extraction works again, scripting is hard...


## [658fee962ea5a97] by Scruffy - 2017-01-26 20:30:11

append is for arrays...


## [d955e0b1e6613d7] by NeoArmageddon - 2017-01-26 17:29:55

Changed some keybindings in HSC. Experimental test if chat works now.


## [523c84a96ab06ca] by NeoArmageddon - 2017-01-26 17:27:47

Added BI setunconscious (reverted from commit 6879dad20c45af59738db66a25cd37b9c0db4d4c)


## [d79fbf2b12998a0] by Scruffy - 2017-01-22 16:40:48

argh


## [b1abaac4a01379f] by Scruffy - 2017-01-22 15:51:48

arr


## [d7dd27b0d90dee3] by Scruffy - 2017-01-22 15:51:10

-added distance check to other positions to CreateMotorPool (same as Com and ammo)
-added new function "CheckCampDistance" to check a position against already spawned camps


## [c48914da1d741fd] by Scruffy - 2017-01-22 15:51:10

-added check if both extract choppers are down, evac marker is replaced


## [9ded640a44999af] by Scruffy - 2017-01-22 15:51:10

-added support for more than 8 ExtractionMarkers


## [dace89ff854b6ee] by Scruffy - 2017-01-22 15:48:40

- number of MotorPools depends on mapsize (distance between NorthWest and SouthEast gamelogics), if not set for the island in WorldConfig (see T100)


## [095d3192d651a7c] by Scruffy - 2017-01-22 15:48:40

- random fuel and damage for vehicles in MotorPool (see T105)


## [0492e3ebfa6a369] by Scruffy - 2017-01-22 15:48:40

-changed extraction spawns, spacing and waypoint so the AI hopefully crashes less often


## [5e3b3764b44e4ae] by Scruffy - 2017-01-22 15:48:39

flag


## [e5e1f57bc98dfe5] by NeoArmageddon - 2017-01-22 15:48:13

Readded some stash stuff (reverted from commit 82260f9b7887aa2e0e7124ec0f1ba984022308db)
began merging to new unit/faction handling


## [75445262241237f] by Scruffy - 2017-01-22 15:27:33

arr


## [3cff8cb2f80536e] by Scruffy - 2017-01-22 15:15:29

-added support for more than 8 ExtractionMarkers


## [c4fb2661e50535f] by Scruffy - 2017-01-22 14:36:52

-added check if both extract choppers are down, evac marker is replaced


## [8dec35e3436690f] by Scruffy - 2017-01-21 23:42:19

-added distance check to other positions to CreateMotorPool (same as Com and ammo)
-added new function "CheckCampDistance" to check a position against already spawned camps


## [8c17abc430f295e] by Scruffy - 2017-01-21 16:33:14

- number of MotorPools depends on mapsize (distance between NorthWest and SouthEast gamelogics), if not set for the island in WorldConfig (see T100)


## [13363eda68c59ef] by Scruffy - 2017-01-21 16:01:35

- random fuel and damage for vehicles in MotorPool (see T105)


## [11eed88da440c9a] by Scruffy - 2017-01-21 15:50:27

-changed extraction spawns, spacing and waypoint so the AI hopefully crashes less often


## [817923d874c6ae7] by NeoArmageddon - 2017-01-19 19:29:26

Commited missing functions


## [84fa05706e8cab5] by NeoArmageddon - 2017-01-19 18:42:38

Replaced all "floor random count" with selectRandom.
Replaced FindSpawnSegment with real FindSpawnRoad function.
Added function to get random player
Improved player detection (and related functions)
Fixed "Undefined reference units" (hopefully)
Made foggy weather less foggy
Thinkering with the idea to offload cinfig values to mission namespace...


## [6879dad20c45af5] by NeoArmageddon - 2017-01-19 18:29:44

Added BI setunconscious


## [9af81e97e9e0493] by NeoArmageddon - 2017-01-19 18:29:23

Lowered pullout distance


## [0a64259d02496f4] by Scruffy - 2016-12-25 20:36:40

-added new Winter Panthera version (comes with Panthera v3.7)


## [a647b4fa0724a7a] by Scruffy - 2016-12-23 20:57:59

-added new Winter Panthera version (comes with Panthera v3.7)


## [700a354291149db] by Scruffy - 2016-10-07 13:38:20

flag


## [82cad97749c611d] by NeoArmageddon - 2016-10-07 13:34:42

Readded some stash stuff (reverted from commit 82260f9b7887aa2e0e7124ec0f1ba984022308db)
began merging to new unit/faction handling


## [a40c6beedff1787] by NeoArmageddon - 2016-10-07 13:28:14

Reapplied Stash


## [41b81c2c75275fc] by NeoArmageddon - 2016-10-07 13:28:14

Readded some stash stuff


## [9406b9a4ef433fb] by Scruffy - 2016-10-07 13:27:33

f*ing autoclose brackets


## [20475ee6f601e74] by Scruffy - 2016-10-07 13:08:15

footer


## [226bf1d243d7931] by NeoArmageddon - 2016-10-07 12:48:12

Fixed return value initialization


## [02b5845ec44c372] by Scruffy - 2016-10-07 12:47:21

more f*ing commas


## [705e92a66a27f70] by Scruffy - 2016-10-07 12:45:56

f*ing brackets


## [4390c03b7bcf6e1] by Scruffy - 2016-10-07 12:29:15

f'ing comma


## [39ac44ad331c01b] by Scruffy - 2016-10-07 10:38:30

more new factions style unitclasses configs for a now complete "BIS Apex" version


## [17caccb7a2bdd28] by Scruffy - 2016-10-06 21:11:42

First file for new factions style of unitclasses


## [c998e2a4e1bb489] by Scruffy - 2016-09-25 13:37:48

-switched separated unitclasses from pushback to append command (details see T107)


## [3db29f25a6ecd32] by Dystopian - 2016-09-21 22:04:36

fix ranks

Test Plan: no

Reviewers: NeoArmageddon

Reviewed By: NeoArmageddon

Differential Revision: http://phab.anzp.de/D13


## [351546ef2967c32] by Dystopian - 2016-09-21 22:03:31

fix player init in new missions

Test Plan: no

Reviewers: NeoArmageddon

Reviewed By: NeoArmageddon

Differential Revision: http://phab.anzp.de/D14


## [b48cd1389a4cb10] by Scruffy - 2016-09-08 16:03:42

-added missions to Malden and Kolgujev (thanks for porting CRCError1970)


## [c1007398b581d35] by NeoArmageddon - 2016-09-05 18:26:20

Added CUP RU to two more terrains


## [115a710f4b41f06] by Scruffy - 2016-09-04 00:11:57

-added first separated unitclasses for BIS Vanilla and Apex (see T107)


## [252100a2311d664] by Scruffy - 2016-09-03 23:14:04

-removed more NVG classes from player (added BIS Apex and CUP classnames)


## [0c9246798095e61] by NeoArmageddon - 2016-08-31 18:07:11

Added Nogova by CRCerror


## [3ebc9f862cf2252] by NeoArmageddon - 2016-08-28 18:01:12

Finally removed D30 ans ZU from ammodepots and roadblocks


## [aa82685b0f2c8ea] by NeoArmageddon - 2016-08-27 16:57:38

Added USMC vs RU to more terrains


## [5bee44378f46c48] by NeoArmageddon - 2016-08-27 16:53:14

Improved USMC vs RU and removed heavy stuff from roadblocks


## [c468fccffe3f0a8] by Scruffy - 2016-07-24 20:40:51

-fixed a missing placeholder for players side which broke player=east versions


## [1a0ccdbb309fec7] by NeoArmageddon - 2016-07-12 18:49:56

Argh!


## [9d79f8edcf23512] by NeoArmageddon - 2016-07-12 18:37:41

Added Phantoms unitconfig for APEX


## [8db69d74449930f] by Scruffy - 2016-06-11 14:11:07

added more ComCenter markers to Australia, increased number of camps that are created


## [f11a06c43d01ef4] by Scruffy - 2016-06-10 17:34:34

doubled number of ComCenter locations for Tanoa


## [70e6751e94435ff] by Scruffy - 2016-06-09 19:50:19

fixed placeholders for players and playerside


## [f0518d250461fc1] by Scruffy - 2016-06-09 19:17:52

added more ComCenters to Tanoa


## [d83aa5a9d5b590e] by NeoArmageddon - 2016-06-09 19:09:25

Added mission.sqm with boats (by Scruffy)


## [566d197accd84ae] by NeoArmageddon - 2016-06-09 18:21:56

Added 22 boatmarkers for Tanoa


## [99d000680c03d9d] by NeoArmageddon - 2016-06-09 18:14:45

Added 263 village markers for Tanoa


## [3bb5327da0737b3] by NeoArmageddon - 2016-06-09 18:13:09

Attempt at fixing missing params in briefing


## [f8702f8bf1f503e] by Scruffy - 2016-06-09 15:48:34

added port to Tanoa, made by Phantom


## [65bbc64f7c84eed] by NeoArmageddon - 2016-06-09 06:09:32

rptLog can now take a non-array parameter (thanks Dystopian)


## [1f1256b70fb49d2] by Dystopian - 2016-06-05 22:39:16

fix MotorPool errors

Test Plan: no

Reviewers: NeoArmageddon

Reviewed By: NeoArmageddon

Differential Revision: http://phab.anzp.de/D12


## [d355df944b5bbdb] by NeoArmageddon - 2016-05-29 11:49:28

Set correct path for code in config


## [8bef0605f967ec9] by NeoArmageddon - 2016-05-29 11:30:04

Changed version to 1.8


## [5a9151bcaa68f10] by ScruffyAT - 2015-03-25 12:53:33

Name hat kein BAS!



Screenshots and Videos

 



Please submit your screenshots and videos and share your Escape stories with us!


Known bugs
You can drown while unconscious.

Sometimes no village patrols spawn on Sahrani.


Roadmap
From now on, Scruffy and me plan to release updates on a more regular basis. We want to port the mission to even more mods and terrains and have a lot of ideas for new features.
Also we want to continue to update the missions scripts to A3 standards.
For the next month we plan among other things:

  • Fixing the drowning issue (partially fixed).
  • Reworking the roadblocks.
  • Reworking the boats (also we want to add civilian boats)
  • Adding different base layouts for ammo depots and comcenters.
  • Adding the crashsite start.
  • Merging more scripts from the 2.0 branch (Ambient Inf, Military Traffic, ...).
  • Adding the new DLC.
  • More awesome stuff

 

Tipps, Tricks and Tutorials

 

Port to another terrains by Scruffy

Replace Revive with ACE by belbo

 

 

Credits

Original Mission (Arma2) by Engima of Östgöta Ops.
Mission ported to Arma3 by Vormulac and HyperZ.
Continue devlopment by NeoArmageddon and Scruffy.
Island ports and unit configs by Scruffy.
Additional scripting and fixing by abelian, dystopian1, FrozenLiquidity, DPM

Additional ports and configs by 
SurvivorOfZeds (IFA3+LEN)
Nils5940 (IFA3)
CRCError1970 (Malden and Kolgujev)
supercereal4 (Malden 2035)

 

Testing:

Armed-Tactics (Maikeks, Darcy, Memphis Belle, Aurelia, Freshman, Lunatic, Joshi) 
The Flying Monkeys In Space,
Roy and many more.

 

The official co10 Escape mission for Arma3 is currently developed and maintained by NeoArmageddon and Scruffy.



Feedback
Please post all feedback, bugs, ideas, request, etc here in this thread.

  • Like 2

Share this post


Link to post
Share on other sites

Nicely done. To address difficulty, maybe you should make use of mission parameters so that people can customize it a bit.

Share this post


Link to post
Share on other sites

We are almost ready to also release the other islands and mod versions. The cleanup Neo did was bigger than planned, so more changes were needed to mission files and unitclasses.sqf

I might even do a small tutorial in one form or another on how to port the mission to other islands. Until then please tell us about any problems you find with the new version.

Benargee: I think we can cook up a harder version for you.

Share this post


Link to post
Share on other sites

I updated the first post with the non april fools versions. I hope you guys had a good laugh with it. And have fun with the actual 1.7 release!

Scruffy an me would really appreciate some feedback for this update.

Share this post


Link to post
Share on other sites

Hey mate

Will try and get a few on later tonight to go through different versions of it, some screens and Videos inbound. Many thanks for the effort!

Share this post


Link to post
Share on other sites

Known bugs

You can drown while unconscious.

Wait... you mean... if you're unconscious in the water, right? :D

I'm glad that you finally released your updated edition of this mission. It's one of my alltime favorites, definitely! :) I'm especially happy about the artillery-parameter in the mp lobby, since I've always found the arti a bit too hard on little groups.

Share this post


Link to post
Share on other sites
Wait... you mean... if you're unconscious in the water, right? :D

Yes ^^

I'm glad that you finally released your updated edition of this mission. It's one of my alltime favorites, definitely! :) I'm especially happy about the artillery-parameter in the mp lobby, since I've always found the arti a bit too hard on little groups.

We just got nearly killed by arti ...

Edited by NeoArmageddon

Share this post


Link to post
Share on other sites

First a big thanks to Armaholic for hosting :ok:

Here is a small video of our first successful April 1st run:

If you want a harder mission and more mayhem I suggest trying the Porto versions. It's really a different experience, because the whole island is active from the start. From 10 tries our

lasted 10 minutes, most of the times you can't get away from the prison :D

Youtube is still processing a complete video from a long but failed run and parts from a successful one on Celle. I'll post them when they are ready.

Today I finished the "porting missions" you need to place markers to port the mission over onto a new terrain, so all of you can do the work for me ;)

Artillery is dialed back, even on the "normal" setting, because it's not placed on the map by hand anymore. It was a fixed number of units before, so on smaller terrains everywhere was covered twice or more, and because of a (now fixed) bug every site in range would fire.

Now a small site with a mortar is spawned randomly instead, just like the ammo depots, and the parameter changes the number of them.

Speaking of ammo depots, it's now worth it to visit more than one. There are no longer crates filled to equip a small army and the content of the crates is randomized. You always get some basic weapons and ammunition and some kind of launcher, but maybe need to raid another one to find a good scope for the Lynx you just picked up.

There is another new surprise where you can get a few western weapons. At least there should be, we didn't find it ourselves yet and hope it works :D

Share this post


Link to post
Share on other sites

Thanks mate for uploading this. Myself and my squad have been playing it all night. The RHS and LOP versions are great and it is very cool to try it out on different maps.

The only thing you could work on is the script when you are unconscious, the chopper sound or the vehicle sound is awfully loud and unnecessary.

The rest is as overpowered and difficult as a Escape XXXX should be. Fantastic stuff.

Share this post


Link to post
Share on other sites
The only thing you could work on is the script when you are unconscious, the chopper sound or the vehicle sound is awfully loud and unnecessary.

I am aware of that and I have no idea what is causing this. I assume a bug with the camera and sound in the engine. But I will try to get a workaround.

Share this post


Link to post
Share on other sites

I updated the first post with the 1.7.1 Version (Hotfix)

Changelog:

Soundbug in revive cam solved (BIS!!!).

Share this post


Link to post
Share on other sites

How to port Escape to another terrain

You will need:

Step 1 - Prepare the files

Unpack the .pbo mission file "co10_Escape.Stratis.pbo", this will leave you with a folder "co10_Escape.Stratis" that includes all mission files and scripts.

Inside the archive with the porting missions you have three additional folders "TE_BuildCommunicationCenter.Stratis", "TE_VillageMarkers.Stratis" and "TE_PatrolBoatMarkers.Stratis".

Put these four folders into your ..\Documents\Arma 3\missions folder. If you use another profile name it should be in ..\Documents\Arma 3 - Other Profiles\YourUserName\missions

Now you need to change the terrain suffix on all four folders. Just rename the folders to whatever the new terrain uses, which could be as easy as ".Altis" or something like ".FDF_Isle1_a" for Podagorsk. If you don't know the proper name, just save a test mission on the island to look it up.

Step 2 - The mission

Now start up the game, go to the editor with the island you want and load the mission "co10_Escape". You will see the player units and logics. Go into marker mode (F7) and a whole bunch of them will show up too. They might be on land, they might be inside the water, but they sure are in the wrong position. You will need to move all of them around.

  • Player units: move them somewhere on land! If you want to change the units just edit them, but if you do delete them and place new ones make sure to copy the proper names and init.
  • The two logics named "SouthWest" and "NorthEast" limit the mission area. You can still go outside of this area later, but camps, patrols or the prison will not be spawned there. Use it to exclude islands far from the mainland or the empty infinite terrain.
  • A logic and a marker named "center", put them both at the center of the area
  • Respawn_West, Respawn_East and Boot_Hill, place them all somewhere on land and away from the action. If available use a small island somewhere off the coast.
  • The "drn_insurgentAirfieldMarker" tells the mission where the airfield is and keeps the prison and ammo camps from spawning in some radius I can't remember now around it. Put it on an airfield obviously, along with the "drn_searchChopperStartPosMarker" and "drn_dropChopperStartPosMarker" markers. Also move the "TrafficMarker_AirField" on one of the roads there.
  • Move the eight traffic markers named "TrafficMarker_North", "TrafficMarker_NorthEast", "TrafficMarker_East", etc. on a road somewhere on the edge to that direction
  • Place the marker "RoadBlockNullRoad" on a road somewhere
  • Move around all markers for the possible extraction positions. There are always three of them belonging together for 8 possible locations. There are "drn_Escape_ExtractionPosX" and "drn_Escape_ExtractionPosX_1", this is where the two helicopters will land, and "drn_Escape_ExtracionBoatSpawnPosX" where the helicopters (yes, despite the name...) will get spawned in.
    You need to move all 8 to a suitable position, I think placing more will do nothing right now.

Step 3 - ComCenter markers

Load another mission, this time "TE_BuildCommunicationCenter" and you will see a player unit and some triggers. First, place the unit on land if it ended up in the water. Again, change to markers mode (F7) and a bunch of them will show up. The important ones are the red markers named "a3e_var_communicationCenter_X", where the X is a number. They are used to mark all positions the game can later pick from to put a ComCenter there. All other markers are just there to help you with placing them and ignored on export. You will have 9 of these relevant markers on the map already, which you could move around, but you can also delete them (and the area_X markers on the same positions) and start with a new one.

There is a red empty marker named "a3e_var_communicationCenter" and a red rectangle marker named "area" without the _X suffix on the map. An arrow marker below point to them and tells you to copy the two. Listen to the arrow :)

If you now paste the markers the game will automatically add the _X number on the end of the name. The mission stops exporting when it can't find the next number, so with _1, _2, _3, _6, _7 only three positions will be generated. This way you don't need to change the names and remember which numbers are used already. The area_x marker shows you the size of the comcenter, to help you placing it in the 2D editor, but you don't need to use it.

Put down the markers wherever you want a possible ComCenter position. Depending on the terrain that can be just a few suitable positions or quite a lot. Don't be afraid to place them right next to each other if you found 2 great positions, the mission checks for the distance between them and will never use both (unless you want to change this minimum distance, more on that in step 6).

When you are ready, don't forget to save the mission, and hit Preview. You now stand on an empty island, but you have three radio triggers available.

0-0-0 will build all the comcenters on the markers you placed. The best way to check them out now is the camera available in the editor, press "Esc" and the button "Camera" on the lower left. You can now see if your positions are viable, or if other objects are in the way or the terrain is to steep and you have to move them.

Get back into the editor and change them, then check again.

0-0-1 will only build a single ComCenter. It's a3e_var_communicationCenter_1, but you can change the number in the trigger. Not really needed, unless want to check overlapping positions I guess.

0-0-2 exports the marker postions to your .rpt file

You only need to do this once, when you are finished and all markers are ready. We'll use them in Step 6

Step 4 - Village markers

Next mission to load is "TE_VillageMarkers", again you will see a player unit you have to move onto land and a trigger. Change to marker mode and find the blue circle named "a3e_village", there's another helpful arrow pointing to it and telling you to copy it. You can use all the other already existing villagemarkers or delete them and start from scratch.

As explained above when you paste the marker the number suffix is added, so you don't need to mess around with the names. You do need to change the sizes though, so open up the new marker, guess the sizes and type them in by hand, press OK and repeat.

Place markers on every city, village, industrial area, military installation, farm or small lonely fishing hut and whatever area you want to have enemy patrols.

You can place a single big marker or a bunch of smaller ones to cover a bigger city. If you want to confine the patrols to the inner part, make it smaller, if it's larger they will also patrol around the city.

The size of the marker determines the number of enemies, so don't just slap a big marker over square kilometer with three farms, if you don't want that area heavily guarded.

These markers are only used for the village patrols, there are still the random searchgroups and military traffic and other surprises to find you outside of these places ;)

0-0-1 exports the marker postions to your .rpt file

You only need to do this once, when you are finished and all markers are ready. We'll use them in Step 6

Step 5 - Boat markers

This one works the same as the village markers, only the marker names are different. It is kind of optional, if you can do without the patrol boats (I think only Altis, Stratis and Porto have them right now), and sometime in the future Neo wants to change the boat system anyway, which will make them obsolete.

If you do place them, remember that the size of the marker determines the number of boats spawned. If you place a big one spanning a kilometer of coast or more, there will be a lot of boats. Try the mission on Porto, where I covered the whole coast :D

0-0-1 exports the marker postions to your .rpt file

You only need to do this once, when you are finished and all markers are ready. We'll use them in the next step

Step 6 - Putting it all together

Now you will need the text editor I mentioned. First find and open your .rpt file. (It's the error log Arma creates while running. It should be located in "C:\Users\YOURUSERNAME\AppData\Local\Arma 3", you will need to show hidden folders to see AppData.

Open up the latest arma3_YYYY-MM-DD_hh-mm-ss.rpt and scroll to the bottom after you exported some markers. You can search for "a3e" and will find blocks of lines looking like this:

17:57:45 ""a3e_villageMarkers = [];""
17:57:45 ""a3e_villageMarkers set [0, [[2131.56,5668.21,0], 13.9301, "RECTANGLE", [140,200]]];""
17:57:45 ""a3e_villageMarkers set [1, [[2001.33,5255.97,0], 13.1558, "RECTANGLE", [50,120]]];""
17:57:45 ""a3e_villageMarkers set [2, [[1951.52,5725.94,0], 13.4924, "RECTANGLE", [50,35]]];""
[...]
17:58:03 ""a3e_communicationCenterMarkers = [];""
17:58:03 ""a3e_communicationCenterMarkers set [0, [[1823.05,5456.52,0], -73.8474]];""
17:58:03 ""a3e_communicationCenterMarkers set [1, [[1713.08,5128.84,0], 106.619]];""
17:58:03 ""a3e_communicationCenterMarkers set [2, [[2010.57,5840.23,0], 823.774]];""
[...]
17:58:23 ""a3e_patrolBoatMarkers = [];""
17:58:23 ""a3e_patrolBoatMarkers set [0, [[2506.64,6677.39,0], 24.2737, "ELLIPSE", [300,500]]];""
17:58:23 ""a3e_patrolBoatMarkers set [1, [[1290.75,3484.85,0], 0, "ELLIPSE", [200,500]]];""
17:58:23 ""a3e_patrolBoatMarkers set [2, [[4125.01,1920.2,0], -50.1342, "ELLIPSE", [500,200]]];""

Open up the mission folder of the edited Escape (Documents\USER\Arma 3\missions\co10_Escape.ISLAND) and inside there go to the folder named "Island". Here are the files you need to paste the marker data into. Copy the blocks with all the marker positions into the corresponding file. Now you need to clean up the rpt output. No need to do it by hand on every line, just use the replace option of your text editor: Replace the Timestamp and double quotation marks at the beginning of each line, and the quotation marks at the end with nothing, press "Replace All". In our example it looks like this afterwards:

a3e_villageMarkers = [];
a3e_villageMarkers set [0, [[2131.56,5668.21,0], 13.9301, "RECTANGLE", [140,200]]];
a3e_villageMarkers set [1, [[2001.33,5255.97,0], 13.1558, "RECTANGLE", [50,120]]];
a3e_villageMarkers set [2, [[1951.52,5725.94,0], 13.4924, "RECTANGLE", [50,35]]];
[...]
a3e_communicationCenterMarkers = [];
a3e_communicationCenterMarkers set [0, [[1823.05,5456.52,0], -73.8474]];
a3e_communicationCenterMarkers set [1, [[1713.08,5128.84,0], 106.619]];
a3e_communicationCenterMarkers set [2, [[2010.57,5840.23,0], 823.774]];
[...]
a3e_patrolBoatMarkers = [];
a3e_patrolBoatMarkers set [0, [[2506.64,6677.39,0], 24.2737, "ELLIPSE", [300,500]]];
a3e_patrolBoatMarkers set [1, [[1290.75,3484.85,0], 0, "ELLIPSE", [200,500]]];
a3e_patrolBoatMarkers set [2, [[4125.01,1920.2,0], -50.1342, "ELLIPSE", [500,200]]];

If you don't place boat markers just put this single line into PatrolBoatMarkers.sqf:

a3e_patrolBoatMarkers = [];

Now open up the WorldConfig.sqf in the same folder. Change the values according to the islands size. You will see the ones for Stratis are pretty low, so I added the ones for Altis and Chernarus as examples:

  • A3E_MinComCenterDistance = 1200; Altis 5000, Chernarus 3000
  • A3E_WorldName = "Stratis"; The name of the island displayed at the start of the mission, where it says "Somewhere on ..."
  • A3E_ComCenterCount = 2; Altis 6, Chernarus 5
  • A3E_AmmoDepotCount = 4; Altis and Chernarus 10
  • A3E_CrashSiteCountMax = 1;
  • A3E_MortarSiteCountMax = 4;
  • A3E_MortarSiteCountMin = 2;

The maximum and minimum number of mortar sites is used as set here only on the "normal" setting, if the parameter is changed to "DiF" the values will be doubled, if changed to "lowered" it will be halved. So don't go below 2 for Min if you don't want to test if Neo added a proper check in the script ;)

If you extract another mission and don't find some of these entries in the WorldConfig, that's because we didn't change them, a standard value will be used.

Now you should change the name of the mission. Inside the mission folder open up ..\include\defines.hpp with your texteditor and change the name on lines 2 and 3.

You can now load up the mission in the editor again and change the name there, too. Now save it and you are nearly finished.

Step 7 - Release it

You did all the work to port Escape onto another terrain. Why not share it with others? If you send us the files we can add the terrain to the next release.

I only need the mission.sqm of the co10_Escape.ISLAND mission and the content of the \Island folder, but you can of course just post the whole .pbo of the finished mission.

If you have problems with extracting the markers from .rpt just save the placing missions when you are finished and send those.

That's it. I'll explain how to do mod versions and the content of the unitclasses.sqf a bit in another post, coming soonâ„¢

If you have any more questions about porting the mission ask here or write me a PM.

  • Like 2

Share this post


Link to post
Share on other sites

Hey guys, wanted to report an issue:

Upon resuming a saved game in MP, the host retains all of his gear, but everyone else starts from zero, even though they all selected the same roles as where we left off.

(My group have lost maps many times due to this >.<)

I'm unsure if this is an 'In Arma' bug, or it's something that you guys can fix, but I do hope it is the latter!

Saving the game for us is a must, as due to obligations we can only play for so long, usually only enough time to get a map and to get ready to raid an ammo cache.

Overall though, this mission has been wonderful at acclimating my friends who are new to the game, and we've had some awesome moments, thanks for that!

Share this post


Link to post
Share on other sites
Upon resuming a saved game in MP, the host retains all of his gear, but everyone else starts from zero, even though they all selected the same roles as where we left off.

That is because of how ArmA3 savegames work. Also as far as I know, saving in MP was broken or wonky, since... ever... and Escape was not designed to support saving an MP session. But maybe, when I have time, I could add somekind of MSO like player persistence.

Share this post


Link to post
Share on other sites
That is because of how ArmA3 savegames work. Also as far as I know, saving in MP was broken or wonky, since... ever... and Escape was not designed to support saving an MP session.

Darn, that's what I suspected >.< A player persistence would be the only solution I suppose, but please, don't feel pressured to do it if it's going to be some massive undertaking. Thanks anyway, hopefully my buddies and I can find more time at some point to play.

Share this post


Link to post
Share on other sites

Thanks NeoArmageddon and Scruffy for your hard work on this most awesome mission of all time! My team and I love it and have been testing all the beta versions as they came out. I must say that this release takes things to a new level and exceeded our expectations. Well done. It has also inspired us to try out RHS: Escalation and Leights OPFOR Pack.

So far we have played Escape Altis Vanilla through one successful and several unsuccessful escapes. I hosted it from a listen server and even used a save game and apart from other players losing gear on reload and the respawn audio bug noted above everything went perfectly. We used the default settings for all parameters, except extraction points which were set to 'close'.

I have also tested Escape Bornholm RHS LOP on my own (again using a multiplayer LAN listen server) in order to test it out with all three mods active. The action was intense and exciting and everything went well up until the end. After I successfully hacked the comms terminal the extraction marker did not appear on the map. I made my way around half the coast hoping to bump into it, but did not succeed. Possibly the extraction marker selection is bugged for this island? I will try again in Escape Bornholm Vanilla v1.7.1, with random extraction points on and see if it changes.

Great work and many thanks!

Share this post


Link to post
Share on other sites
I have also tested Escape Bornholm RHS LOP on my own (again using a multiplayer LAN listen server) in order to test it out with all three mods active. The action was intense and exciting and everything went well up until the end. After I successfully hacked the comms terminal the extraction marker did not appear on the map. I made my way around half the coast hoping to bump into it, but did not succeed. Possibly the extraction marker selection is bugged for this island? I will try again in Escape Bornholm Vanilla v1.7.1, with random extraction points on and see if it changes.

Glad you report this. Maybe something broke in the compiler stage. Last time we tested, Bornholm worked as expected. We will look into it at the end of the week. We also plan to add more patrols to Bornholm, as for now, most sites are abandoned (Yoshis fault ;) ).

Also you guys should try the accelerated time setting. Set it to the smallest setting (factor 4 I think) and start at around 10am. You will have a whole ingame day in one Escape session, that just feels awesome!

Share this post


Link to post
Share on other sites
Hey guys, wanted to report an issue:

The same for me. We tried delete all saves but nothing happens.

Fix: unpack mission and change "briefingName" string in mission.sqm for something new, example "Escape Takistan RHS 1.7.1_2". And never more to press button save and exit;)

Share this post


Link to post
Share on other sites
I have also tested Escape Bornholm RHS LOP on my own (again using a multiplayer LAN listen server) in order to test it out with all three mods active. The action was intense and exciting and everything went well up until the end. After I successfully hacked the comms terminal the extraction marker did not appear on the map. I made my way around half the coast hoping to bump into it, but did not succeed. Possibly the extraction marker selection is bugged for this island? I will try again in Escape Bornholm Vanilla v1.7.1, with random extraction points on and see if it changes.!

Found the problem (a typo). It only occures when selecting either "Far" or "Near" Extraction points. With "Random" everything should work fine. It will be fixed in the next update. Thanks for your feedback :D

Share this post


Link to post
Share on other sites

Hey, love the map (as always, still by far my most favorite map). However, I'm worried that the new patch might break it. A few things:

Playing it with no mods (Vanilla), on Dev branch (at time of posting, soon to be the official release), there are several errors that pop up at the start (comm center distance-related), mid-mission (search leader, and "surprise" drone, etc). Mission plays fine, but these errors cover the screen for a good portion of the game.

Playing it with RHS (RHS version obviously), the mission on any island will not load. It goes to a black screen and says "Loading...", but if you hit escape it's a view of a general area, like it's hanging on something.

Additionally, possibly dev branch related, sometimes the main weapons on the starting guards are "broken", or the magazines in them are bugged, and they resort to their pistols. If you, yourself, pick up said weapon, you have to reload it before you can fire it.

Lastly, some more non-bug-related-things...

1: Will there ever be a built-in feature to randomly add weapons and ammo from enabled mods onto randomly generated patrols? Is this possible? This is my most desired feature, but I get the feeling it might not be that easy to implement.

2: The green bag is hard to find in the middle of the grass at times, due to its size and color. Damn you, camoflauge!

3: The arsenal in the newest update lets you make loadouts for soldiers and save them to be exported into missions (Arsenal). I'm hoping this can be utilized somehow?

Love everything you guys are doing. Keep it up!

Share this post


Link to post
Share on other sites
Hey, love the map (as always, still by far my most favorite map). However, I'm worried that the new patch might break it. A few things:

Playing it with no mods (Vanilla), on Dev branch (at time of posting, soon to be the official release), there are several errors that pop up at the start (comm center distance-related), mid-mission (search leader, and "surprise" drone, etc). Mission plays fine, but these errors cover the screen for a good portion of the game.

That's a devbranch problem. The error messages are no harm as most are only related to undefined variables with "private". I am slowly fixing all the scripts with it. But to make sure, you could upload your RPT for me with all the error messages you observe.

Playing it with RHS (RHS version obviously), the mission on any island will not load. It goes to a black screen and says "Loading...", but if you hit escape it's a view of a general area, like it's hanging on something.

RHS version works for me. Maye you could provide me a clean RPT (Restart ArmA3 CLient and Server, launch an RHS mission, wait until the loading screen, wait 20 sec and exit everything) of your client and server, when this happens.

Additionally, possibly dev branch related, sometimes the main weapons on the starting guards are "broken", or the magazines in them are bugged, and they resort to their pistols. If you, yourself, pick up said weapon, you have to reload it before you can fire it.

I assume it is a devbranch problem. We will see.

Lastly, some more non-bug-related-things...

1: Will there ever be a built-in feature to randomly add weapons and ammo from enabled mods onto randomly generated patrols? Is this possible? This is my most desired feature, but I get the feeling it might not be that easy to implement.

2: The green bag is hard to find in the middle of the grass at times, due to its size and color. Damn you, camoflauge!

3: The arsenal in the newest update lets you make loadouts for soldiers and save them to be exported into missions (Arsenal). I'm hoping this can be utilized somehow?

1) That won't happen because we want the mission to have a certain realism and style. There are no "side" variables in weapon configs so we can't see to which side which weapon belongs. This would ultimatly result in a weapon chaos and the chances that you encounter an enemy patrol with the ammo you are in need if would become less the more mods you have installed. This would not only break immersion but gameplay too. But we can always incorporate other mods in the mission, if there is a demand and the mods stands for itself.

2) It's a hidden backpack ;)

3) That was already possible for quite some time, but creating loadouts for every mod and keeping them up to date would be a big struggle.

Scruffy and I dicussed a new approach for patrols and loadouts today that would increase the immersion and variation of enemy patrols. But it is just an idea for now.

And thanks for your feedback!

Share this post


Link to post
Share on other sites

Firstly its great to see this mission given new life in arma 3, the group i play with got super excited when I told them about it. However, I tried it out yesterday with another guy and got quite far. In the end we only died because I accidentally killed us both with the backblast from an RPG and it was after that that we wondered why it had taken us so long to die. We played it again and walked out of the starting prison area and the guards didn't try to shoot us. Even when we shot them they didnt return fire and none of the enemies seem at all bothered by us. We have ASR AI running on our server so I dont know if thats a contributing factor but I thought I'd let you know and see if theres anything we can do.

Share this post


Link to post
Share on other sites
We have ASR AI running on our server so I dont know if thats a contributing factor but I thought I'd let you know and see if theres anything we can do.

Try disabling ASR AI. I have no idea if it is messing with the AI in escape. You can also test with the debug console "captive player". When this is true, something has prevented the escape scripts to set the captivity correctly.

We also just noticed a problem in the vanilla version with taking items that are in no container (map, fak, glasses, etc) from bodys. Haven't checked the other versions yet. Looks like BIS broke something with the inventory again... I will see if I can fix that from the mission side.

Share this post


Link to post
Share on other sites

The issue with AI happened to me as well. Running vanilla A3, enemies wouldnt shoot at all or they would but only some of them or after considerable delay.

Played yesterday, enemies started shooting at us immediately after we spawned and havent touched the backpack yet or moved. Also the helicopter spawned right next to the prison and we couldnt get rid of it. But otherwise great mission :)

Share this post


Link to post
Share on other sites
The issue with AI happened to me as well. Running vanilla A3, enemies wouldnt shoot at all or they would but only some of them or after considerable delay.

Played yesterday, enemies started shooting at us immediately after we spawned and havent touched the backpack yet or moved. Also the helicopter spawned right next to the prison and we couldnt get rid of it. But otherwise great mission :)

Tested vanilla now a couple of times and AI shoots at us as expected.

You see the heli spawn, when the Prison is next to the airfield.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×