buldozer lags

ok, i made format to my pc yesterday, now i reinstall O2 and Buldozer, but buldozer is very laggy. i searched some post before and i found someone with the same problem, but with no answer for him too.

when i move my mouse, or try to rotate buldozer lags.

The funny thing is that when i put the parameter -noland or -dx -window in O2 options it works fine, but if i have them together the problem is appearing.

1st) i redownload buldozer and o2 (don't work)

2nd) i try to replace the dlls (don't work)

3rd)i replace config.bin from res (don't work)

4th) i replace userinfo.cfg and flashpoint.cfg (don't work)

5th) i reformat the partition i use (only) for buldozer from NTFS to FAT32 (don't work)

6th) i reinstall DX9 (don't work)

update

7th)reinstall VGA drivers NVdia GF6800 (ASUS V9999) 256MB RAM Don't work

8th)update USB drivers (Don't work)

9th)install intetl's inf drivers for chipset (don't work)

10th)install new drivers fr my mouse and keyboard (wireless ms) (maybe that partialy worked)

but i think i solved it, i have 2 SATA HDD (both Seagate and 160GB each) so i moved the buldozer folder to a partition on primary HDD and worked?  

then i removed again buldozer back to the previus partition and worked too  

what can i say. only        

at least maybe this list can help someone else that might face the same    problem....

It works fine for 30mins, i hope it coninue woking.

I hope o2 is alot easier to use for Arma!

very constructive chipper..

oxygen2 is pretty same as it is now..

anyway

i cant really help you either m8

i had a similar problem a while back

buldozer ran fine but when i had it open or been workin in oxygen while having dozer open oxygen laggeg pretty much

was a driver issue

got it away by installing omega drivers

suggest you use some other drivers for your graphcard.

also

copy the flashpoint.cfg from the OFP directory into your oxygen folder and overwrite it.