It was changed recently:
[87645] Changed: Default memory allocator is now tbb4malloc_bi instead of tbb3malloc_bi
It was changed recently:
[87645] Changed: Default memory allocator is now tbb4malloc_bi instead of tbb3malloc_bi
Iron Front: Liberation 1944 Beta Tester
Take On Helicopters: Rearmed Beta Tester
OMAC Mission Pack 1
Tactical Withdrawal mission for Iron Front Liberation 1944
A Mine In South Asia
PC/video specs
Ahh, ok thank you.
Vote for these Bugs
Spoiler:
PC Spec:
Spoiler:
Tried to run the PvP MemAlloc Suite with 89025, but with the default settings of that test it seems that Vsync is on...I was getting capped at 60 FPS for most of the tests. Is there a command to disable that? Also, is it possible to get more than just the average FPS, because that alone is not always the best indicator of performance. Be nice to have min and max as well.
Core i7 920 @ 3.995 GHz, HT off
12 GB OCZ DDR3-1600
GTX 680
2x Intel X25-M 80 GB SSD
Windows 7 Pro x64
ArmA2/OA Settings:
1920x1080 w/ View Distance at ~3600
Video Memory at Default
MSAA Very High, AToC=0, SMAA Ultra
Post Processing at Very Low
All other settings at Very High
So now that tbb4malloc_bi is the default allocator, there is no more need to specify it into the shortcut target right? The allocator command should only be used if I want to use a different allocator than tbb4malloc_bi?
Yes,but only with a beta patch (use latest one to be sure)
tbb4malloc_bi is not the default allocator in 1.60 vanilla
Vote please:
http://dev-heaven.net/issues/23473
http://dev-heaven.net/issues/23028
http://dev-heaven.net/issues/23378
RELEASE ARMA 3 PLEASE !!
I had a crash while playing a long game on Warfare BE the other night on the latest beta. The .rpt indicates its something to do with tbb4malloc_bi:
https://docs.google.com/open?id=0B4X...MyMDhjNDJkNDU2
I am also trying to diagnose a separate issue which may be linked but need to test further. I think the client may be degrading over time performance wise in the latest betas, as I don't seem to get it on official 1.60 patch. It is time consuming to reproduce consistently though. I have reverted the beta to use tbb3malloc_bi, so will see how that goes.
Specs are:
Specs:
i7 920 Bloomfield C0/C1 @ 3.8Ghz
12GB Corsair Vengeance @ 16000Mhz
Gigabyte GA-EX58-UD3R Rev 1.0
Geforce GTX 580 1.5gb
Windows 7 x64 Ultimate Edition
Arma 2 is installed on an OCZ Vertex Turbo SSD.
Results for the last few betas
Basically no change as far as I can tell.PHP Code:" AVG FPS AVG MIN HIGHEST LOWEST"
// 1.60.89025
### With FXAA
tbb3malloc_bi "31 25 51 8"
tbb4malloc_bi "32 26 46 8"
jemalloc_bi "31 25 48 6"
nedmalloc_bi "30 25 43 8"
tcmalloc_bi "31 25 51 8"
system "28 20 42 2"
// 1.60.89025
### Without FXAA
tbb3malloc_bi "32 26 50 8"
tbb4malloc_bi "31 24 51 6"
jemalloc_bi "32 25 46 7"
nedmalloc_bi "29 24 40 8"
tcmalloc_bi "33 26 53 8"
system "27 18 42 3"
// 1.60.89096
tbb3malloc_bi "35 28 61 6"
tbb4malloc_bi "32 26 51 7"
jemalloc_bi "31 25 48 8"
nedmalloc_bi "30 24 54 2"
tcmalloc_bi "31 26 48 8"
system "28 20 44 2"
// 1.60.89162
tbb3malloc_bi "32 26 50 7"
tbb4malloc_bi "34 27 60 8"
jemalloc_bi "33 26 54 3"
nedmalloc_bi "29 25 38 6"
tcmalloc_bi "31 26 43 8"
system "28 20 40 2"
// 1.60.89223
tbb3malloc_bi "33 26 50 8"
tbb4malloc_bi "37 30 51 6"
jemalloc_bi "31 25 48 7"
nedmalloc_bi "29 24 42 8"
tcmalloc_bi "35 28 60 4"
system "28 20 42 2"
The latest beta has some better FPS with tbb4 and tc.
Which memory allocator does last official patch use?
Should I install latest beta with the tbb4 mem alloc?
I think I am going to start tightening my ram timings.
It uses tbb4. It will AUTOMATICALLY use tbb4 ... so not needed in commandline.
PHP Code://93415
"AVG FPS AVG MIN HIGHEST LOWEST"
tbb3malloc_bi
"33 26 57 8"
tbb4malloc_bi
"33 26 57 8"
jemalloc_bi
"33 26 54 2"
nedmalloc_bi
"31 25 48 2"
tcmalloc_bi
"33 27 56 5"
system
"29 20 46 2"
PHP Code://93586
"AVG FPS AVG MIN HIGHEST LOWEST"
tbb3malloc_bi
"34 27 60 8"
tbb4malloc_bi
"36 28 60 8"
jemalloc_bi
"31 25 43 8"
nedmalloc_bi
"32 26 50 8"
tcmalloc_bi
"34 27 57 8"
system
"29 21 46 2"
PHP Code://93616
"AVG FPS AVG MIN HIGHEST LOWEST"
tbb3malloc_bi
"32 26 48 6"
tbb4malloc_bi
"33 26 50 8"
jemalloc_bi
"32 26 50 3"
nedmalloc_bi
"31 24 45 3"
tcmalloc_bi
"35 27 54 2"
system
"29 20 50 2"
Q6600 @ 2.4 GHZ (XP32b) to i7 920 @ 4 GHZ (Win7 64b)PHP Code://93825
"AVG FPS AVG MIN HIGHEST LOWEST"
tbb3malloc_bi
"35 27 57 8"
tbb4malloc_bi
"41 32 60 8"
jemalloc_bi
"33 26 57 8"
nedmalloc_bi
"33 26 52 8"
tcmalloc_bi
"34 26 54 6"
system
"31 22 48 2"
With V-Sync disabled and no longer window modePHP Code://93825
"AVG FPS AVG MIN HIGHEST LOWEST"
tbb3malloc_bi
"57 47 62 17"
tbb4malloc_bi
"57 48 62 1"
jemalloc_bi
"57 47 61 13"
nedmalloc_bi
"56 46 62 13"
tcmalloc_bi
"57 47 62 14"
system
"57 48 62 2"
PHP Code://94103
"AVG FPS AVG MIN HIGHEST LOWEST"
tbb3malloc_bi
"77 63 109 11"
tbb4malloc_bi
"75 62 110 9"
jemalloc_bi
"74 61 120 1"
nedmalloc_bi
"70 59 105 8"
tcmalloc_bi
"73 62 109 1"
system
"71 60 106 1"
PHP Code://1.62.95248
"AVG FPS AVG MIN HIGHEST LOWEST"
tbb3malloc_bi
"77 65 119 15"
tbb4malloc_bi
"75 63 110 9"
jemalloc_bi
"76 64 109 1"
nedmalloc_bi
"75 63 109 1"
tcmalloc_bi
"76 64 110 1"
system
"74 63 107 1"
Last edited by .kju [PvPscene]; Jul 25 2012 at 07:14.