STEAM troubleshooting [Archive] - Bohemia Interactive Forums

View Full Version : STEAM troubleshooting

Dwarden

Jun 26 2009, 13:53

All STEAM related issues will be merged into this thread after being resolved, answered or acknowledged ...

Dedicate server is now also available on STEAM inside TOOLS section of STEAM client.
You can start it by commandline: Steam.exe -applaunch 33905

you can also post into this thread ... it will be sorted as needed :D

post please Your

Please post full specs of your system:

mainboard brand,model, chipset
processor model,speed
graphics card brand, type, ramsize, interface, driver build
audiocard brand,model,interface driver build
which OS and what servicepack
each HDD brand, model, interface

and ingame settings (or if it does at any settings), especially both UI/3D resolutions

and friendly advice,
several people who experienced various performance issues solve them by
(order doesnt matter sometimes they needed only some sometime all):

- temporary disabling antivirus while running ArmA 2
- disabling all unneeded applications (especially browsers, media players, scanners etc.)
- using windowed mode instead of fullscreen
- using fullscree mode instead of windowd
- disabling forced AA / AF in drivers (huge performance killer as game does that self ingame)
- changing ingame advanced video settings (needs lot of try&fail cycles)
- using -maxmem=2047 (with 3+ GB ram only)
- restarting OS
- defragmenting drive
- place ArmA 2 (demo) on different drive than OS (2 HDD system) and ideally different than swap file (3 HDD system)
- updating drivers
- installing SP2 for Vista
- installing SP3 for XP
- validating the STEAM file cache (select arma2 in STEAMgames list>right mouse button> properties > local files > verify integrity of game cache + restart steam
- checking this for key issues : https://support.steampowered.com/kb_article.php?ref=4950-EKAM-2644
* try above first before posting :)

Dwarden

Jun 26 2009, 15:38

example of solved ones

Q:
Hi I have right downloaded the demo from Steam (it took 5 hours)
And when I go into the game then right after where there stands "ArmA II" the game close down and this error message popup: "Warning: preNLOD format in object ca\structures\mil\mil_house.p3d"

Please help me :o

A:
please select by mouse game in steam client's games list > then right mouse button > properties > local files > verify integrity of game cache, wait till it's done and retry to run afterward and then tell us if it helped

THANKS:
now its updating something :) but it is taking 4 hours but only whit ca 60 KB/s

---------- Post added at 02:30 PM ---------- Previous post was at 02:28 PM ----------

Q:
now I stopped something and now it is updating whit ca 200 KB/s :)
A:
in steam client settings > downloads > you can try change download location to anothe closer to your and restart steam and then get faster download speeds
THANKS:
Thanks again :) I have had steam in so long time but you are doing it so much easier :)

David1054

Jun 26 2009, 15:46

Hi im having some video problems.
The game updated the direct x before it launched the first time, but all i get is a black screen.
Is it my video card?
Or is the resolution starting off to high. I dont have many resolution options since im using a tv at the moment since my monitor died after years of loyal use lol..

Any help or suggestions i could try?

EDIT:
btw my system specs are
Amd Phenom x3 8750 @<hidden> 2.98Ghz
3 GBs ddr2 ram 667
9500 GT 1gb ( Upgrading to 4870 1gb in a month )

Could my problem be the video card?

Dwarden

Jun 26 2009, 15:49

ok can you try use STEAM beta client ? settings > account > in section beta click change and choose participate in "STEAM beta client"

report if problem still persist !

David1054

Jun 26 2009, 15:59

Dwarden

Jun 26 2009, 16:28

there is no -wm , for windowed you must use -window
and no signal looks like out of monitor's Hz range

David1054

Jun 26 2009, 18:23

Is their anyway i can change it? Or am i forever screwed by these dreaded Hz's
lol
D:

Please is their any way D:?

EDIT:

I can play now thing is the resolution was to high but i can run the game without problems. No lag what so ever.
Did it by going to shortcut the one that skips the steam thing.
Properties then cheking to start the game at 640 x 800 something like that
and i changed the settings.

Woot :D
Im so buyin it

Ddawguga

Jun 26 2009, 19:01

Ok i downloaded from steam. Done and Done. However when i start the game i get " Bad Serial Number Given at Startup". WTF i got this off steam! Could this have to do with the fact that i have the demo?

Sordal

Jun 26 2009, 20:26

Ddawguga I have the same problem... I had the demo installed while downloading the full game as well. I uninstalled the demo, Please could someone post a fix thanks....

---------- Post added at 01:26 PM ---------- Previous post was at 01:07 PM ----------

Ok I fixed it (credit goes to toto pecktore on the steam forums) go hear https://support.steampowered.com/kb_article.php?ref=4950-EKAM-2644 follow the steams for CD key trouble shooting

Dwarden

Jun 26 2009, 20:59

the fix for key issues is https://support.steampowered.com/kb_article.php?ref=4950-EKAM-2644

trinsic

Jun 27 2009, 01:17

The game loads fine, but when I try to configure a key for movement or any other key it crashes to desktop.

Operating System: Windows 7 Ultimate Professional 6.01.7100
Report Date: Friday 26 June 2009 at 18:16

------------------------------------------------------------------------------------------

<<< System Summary >>>

> Mainboard : Asus P5N-D

> Chipset : nVidia nForce 750i SLI SPP

> Processor : Intel Core 2 Quad Q9450 @<hidden> 2666 MHz

> Physical Memory : 8192 MB (4 x 2048 DDR2-SDRAM )

> Video Card : NVIDIA GeForce 8600 GT

> Hard Disk : WDC (1000 GB)

> Hard Disk : WDC (251 GB)

> DVD-Rom Drive : TSSTcorp CD/DVDW TS-H552B ATA Device

> DVD-Rom Drive : PLEXTOR DVDR PX-850SA SCSI CdRom Device

> Monitor Type : LCM-22w3 - 22 inches

> Operating System : Windows 7 Ultimate Professional 6.01.7100

> DirectX : Version 10.00

------------------------------------------------------------------------------------------
***** End of report *****

Dwarden

Jun 27 2009, 01:25

please if you have crash search on your harddrive file

ARMA2.rpt

usually in
Documents and Settings
username
Local Settings\Application Data\ArmA 2\

there should be also these files (or at least one of them)
ArmA2.mdmp
ArmA2.bidmp

pack them (all 3 or 2) into zip archive and upload as attachment to your next post ...

trinsic

Jun 27 2009, 01:40

Confirmed same problem in Windows XP SP2 on my dual boot system.

Here is the attached file
http://www.guruextraordinaire.com/files/arma2.zip

Thanks for the quick reponse BTW. I want to play :D

Boomer19

Jun 27 2009, 02:45

Installed the game..played Everything was fuzzy graphics wise..was told to download the patch..installed patch and now it says No disk Found :[

any ideas

Beachwood

Jun 27 2009, 03:01

Dwarden, I installed the Steam version of ArmA 2, and am having graphics difficulties. On every single graphics setting, including the default one, there are no textures on anything except for the water. I have tried changing the advanced settings many times. The game is very smooth and loads quickly except for that one problem. I had the same problem with the ArmA 2 demo. I deleted the demo and the folder in the "My Documents" folder.

Asus,Rampage II Gene, Intel X58
Intel i7 920, 2.67Ghz
EVGA & XFX, GeForce 9800GT, 512Mb, SLI, 186.18
Vista 64, SP2
2xWestern Digital, Raptor 36Gb, SATA Raid 0
Corsair HX1000W
CORSAIR XMS3 12GB DDR3 1333

Dwarden

Jun 27 2009, 03:39

Installed the game..played Everything was fuzzy graphics wise..was told to download the patch..installed patch and now it says No disk Found :[

any ideas

WHO TOLD YOU INSTALL PATCH ?
STEAM BUILD IS NEWEST NO NEED TO PATCH ...

now you need to validate game cache and redownload the messed files

or this : https://support.steampowered.com/kb_article.php?ref=4950-EKAM-2644

Kocrachon

Jun 27 2009, 04:30

Dwarden

Jun 27 2009, 04:53

When ever I tried launching the game or the demo from steam i just get the error on my screen saying it crashed...
Nothing launches at all, I click launch and instantly nothing pops up but the window that says the game has crashed.
Vista SP2
8 gigs of ram
ATi 4870
Q9450 2.66 processor quad core
not sure on HDD brand...

http://forums.bistudio.com/showpost.php?p=1331849&postcount=12

please provide crash dumps if you can, thepath and filenames got at end demo for demo :)

---------- Post added at 06:53 ---------- Previous post was at 06:45 ----------

Dwarden, I installed the Steam version of ArmA 2, and am having graphics difficulties. On every single graphics setting, including the default one, there are no textures on anything except for the water. I have tried changing the advanced settings many times. The game is very smooth and loads quickly except for that one problem. I had the same problem with the ArmA 2 demo. I deleted the demo and the folder in the "My Documents" folder.

Asus,Rampage II Gene, Intel X58
Intel i7 920, 2.67Ghz
EVGA & XFX, GeForce 9800GT, 512Mb, SLI, 186.18
Vista 64, SP2
2xWestern Digital, Raptor 36Gb, SATA Raid 0
Corsair HX1000W
CORSAIR XMS3 12GB DDR3 1333

some users reported going back to 185 drivers fixed issues for them ...

rowdied

Jun 27 2009, 05:39

ExA-Heretic

Jun 27 2009, 06:01

Since I bought my copy of Arma 2 from Steam, I guess I will post this here, though I have seen a couple of other people with the same type of problem I am having.

First off I will tell you what I am running for a system.

Windows Vista Home Premium 64 w/ Service Pack 2
AMD Phenom 9500 Quad-Core Prccessor 2.21 GHz
8GB Dual Channel Ram
2 EVGA GeForce 9800 GT Superclocked 512MB PCIe in SLI.
All my Drivers are up to date.

Now on to the problem that I am having. When I load into the game everything is Blocky, kinda like it is in the beta version of the game. If you don' t understand that, here are a few screen shots from my game.

http://www.exabyssus.com/pics/arma/arma2-1.png
http://www.exabyssus.com/pics/arma/arma2-4.png
http://www.exabyssus.com/pics/arma/arma2-5.png

Any Help would be great here

Dwarden

Jun 27 2009, 09:56

start game with commandline parameter -winxp

there are still some issues with some drivers vs 8+GB

Kridian

Jun 27 2009, 12:44

WHO TOLD YOU INSTALL PATCH ?
STEAM BUILD IS NEWEST NO NEED TO PATCH ...

now you need to validate game cache and redownload the messed files

This tip should be on the ArmA2 Graphic on the Steam Store. Had no clue that it was patched already.

Game works great!

Dwarden

Jun 27 2009, 12:52

Did it and still getting same problem.

No Signal Detected.

Yup still i cant force a resolution either trough launch options.
I tried

-wm ( windowedmode)
-w 1024 (sets res to 1024 x 768 )

tried simple things but all im getting is
No signal detected.
I think the starting resolution isnt supported by my tv =[

in arma2.cfg / arma2demo.cfg (located in my documents \ ARMA 2 \ or \ARMA 2 Demo \
check entry
refresh=nn; where nn is number in Hz some people reported it autoset 75 on theirs 60Hz LCD or others outofrange for certain TVs

Kocrachon

Jun 27 2009, 16:13

My error says no more than this...

ArmA 2 has stoped work

A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

edit:

I have also deleted the ENTIRE steam folder and re-downloaded everything. After download I also verified the integrity of the files..

Dwarden

Jun 27 2009, 16:55

Casper3141

Jun 27 2009, 17:09

When I go to launch the game from steam it does the loadup checklist, screen goes black like its going to launch then it crashes and I get a "Shader not supported anymore" Message, I fucking hate steam :mad: any suggestions I really want to play :)

Cpt.Goose

Jun 27 2009, 17:44

its your 8gbs of ram I'm guessing. Similar problems out there with other users running 8gbs. Take a stick out and see if it runs on 6gb with no graphical problems. If so, leave it out until they fix in patch.

Kocrachon

Jun 27 2009, 18:04

I had no issue in the past with the downloaded demo, I feel steam is the issue to be honest..

Ticket submited on the DH site..

ExA-Heretic

Jun 27 2009, 20:14

Dwarden I add you as a Steam contact, my steam username is hereticss. Tried the command line that did not work as well. Maybe we could sort this out on steam. Well atleast try.

Kocrachon

Jun 27 2009, 22:12

I HAVE FOUND A SOLUTION!!

Alot of steam users will get a generic windows crash if the game fails to launch with steam.
However, when I went into the actual ArmA 2 folder and launced ArmA 2 straight from there, I got the error for x3daudio1_6.dll.

So hint to steam users. If your game is just plain crashing, launch it from the folder to get the actual error.

Dwarden

Jun 27 2009, 23:37

Kocrachon

Jun 28 2009, 00:10

and we are back to square 0, it's this http://forums.bistudio.com/showthread.php?t=76668

Roger that.. just letting steam users know how to launch the game to retreive the error. Since steam just likes to crash it.

Casper3141

Jun 28 2009, 00:57

I still just keep getting the error message "Shader 2 not supported anymore" everytime I try to launch the game

Dwarden

Jun 28 2009, 01:26

I still just keep getting the error message "Shader 2 not supported anymore" everytime I try to launch the game

what's your GPU?

moisesjns

Jun 28 2009, 02:40

ARGH i cant play arma 2 I get the black screen and the no signal crap and im sure its my resolution i checked my rpt file in app data and it says

graphics: D3D9, Device: NVIDIA GeForce GTS 250, Driver:nvd3dum.dll 8.15.11.8618
resolution: 1280x968x32

my resolution is at 1024x768 WHY does it start like that with this game its liek this for many other games i went to the nivida control panel and it also says 1024 x 768 PLEASE help i wanat to buy this game and i aint gonna if i cant fix this :(

Casper3141

Jun 28 2009, 02:50

what's your GPU?

Whats a GPU?

moisesjns

Jun 28 2009, 02:52

NEVER mind I FIXED IT HEY PAY ATTENTion this could be a lot your guys problems

OK so fo rme i KNEW it was my resolution was WAY to high to check what the game resolution is starting at go to C/ users/ app data/local/arma or arma 2 demo/ OK now open rpt file with notepad now ctrl f and search for resolution it will tell you what the game is starting at .

NOW here is what i put so the game would work i put in the cfg file in c/ users/ documents arma arma 2 demo folder

resolution_w=1024
resolution-w=768
refresh=59;
Render_W=1024;
Render_H=768;
FSAA=0;
postFX=2;
HDRPrecision=0;
lastDeviceId="";
localVRAM=896;
nonlocalVRAM=1900;

add that and see if it works THANK you optimization Folder oh btw i have a gts 250 so that might be the problem for many 2xx cards

Antichrist

Jun 28 2009, 09:22

Whats a GPU?

Graphics processing unit aka Video Card/Graphics Card/etc

Dwarden

Jun 28 2009, 13:14

if you NVIDIA card owner read (performance tips) and post your experience here : http://forums.bistudio.com/showthread.php?t=76908 and http://forums.steampowered.com/forums/showthread.php?t=907283

Canadian56

Jun 28 2009, 18:09

i own a NVIDIA GeForce FX 5500 graphics card and i cant disable any phisX thing and i have the shader error and i have tryed almost everything i could find. so if i could get any help :P

jake01

Jun 29 2009, 05:36

jake01

Jun 29 2009, 07:45

forgot to mention im on windows7 x64. I tried renaming a shortcut but no changes..and i doubt that would do anything. Any time I change the Arma 2.exe to Crysis or Crysis64 .exe the game just won't run. thanks in advance for help.

McBacker

Jun 29 2009, 14:17

i own a NVIDIA GeForce FX 5500 graphics card and i cant disable any phisX thing and i have the shader error and i have tryed almost everything i could find. so if i could get any help :P

Dude, i believe this VGA is not supported... it is very old BTW... =/

TacMedic2

Jun 29 2009, 17:39

I am wondering how to run addons with the Steam version of ARMA 2. I hastily bought ARMA 2 through Steam thinking it was the same as the retail box (folder wise at least) I don't really run mods so I don't want to run @<hidden> switches on the shortcut if possible. The faq says you can run addons but do you need to list every addon in command line? I am running Windows 7 64bit as well.

Thanks for the help!

---------- Post added at 09:39 AM ---------- Previous post was at 09:33 AM ----------

I am wondering how to run addons with the Steam version of ARMA 2. I hastily bought ARMA 2 through Steam thinking it was the same as the retail box (folder wise at least) I don't really run mods so I don't want to run @<hidden> switches on the shortcut if possible. The faq says you can run addons but do you need to list every addon in command line? I am running Windows 7 64bit as well.

Thanks for the help!

Nevermind I fiqured it out myself...for others out there that might be looking for the same thing.

C:/program files(x86)/steam/steamapps/common/arma 2/AddOns/

Dwarden

Jun 29 2009, 23:12

I am wondering how to run addons with the Steam version of ARMA 2. I hastily bought ARMA 2 through Steam thinking it was the same as the retail box (folder wise at least) I don't really run mods so I don't want to run @<hidden> switches on the shortcut if possible. The faq says you can run addons but do you need to list every addon in command line? I am running Windows 7 64bit as well.

Thanks for the help!

---------- Post added at 09:39 AM ---------- Previous post was at 09:33 AM ----------

Nevermind I fiqured it out myself...for others out there that might be looking for the same thing.

C:/program files(x86)/steam/steamapps/common/arma 2/AddOns/

i answered this question over dozen times on the forum here :)
http://forums.bistudio.com/showpost.php?p=1326311&postcount=266

y2khippy

Jun 30 2009, 15:51

Damack

Jun 30 2009, 17:40

Ok maybe it's me but I'm having some problems with the mod folders...

When in Arma 1 you just opened the launcher.. or created a short cut using the @<hidden> folder in the location...

So for STEAM how do I open a mod folder?? In the (MyGames) tab I can't add a new short cut there can I? Or can I just make another short cut on my desk top???

Also, I have seen on armaholic that you can download a launcher for Arma 2 can I still use that to launch it in Steam...

I couldn't wait till the Hard Copy release on the 7th... :)

Gladiuz7

Jul 1 2009, 00:57

Hay Hi i got the demo of Arma 2 and plays ok crash every now and then but not bad but it works .

So i bought Arma 2 off Steam and it says its %100 so i click on it tried the short cut try every way there is to launch it but it comes up with the same Error (this game is currently unavailable please try again at another time) i have tried every thing on this page (https://support.steampowered.com/kb_article.php?ref=4595-WEXN-6831) to resolve it but nothing works please help me

____________________________________________________________
Vista Home Premium SP1
Intel Core 2 Duo 3.00GHz
Ram 4GB
Nvidia GeForce 9600 GT / Resolution: 1680x1050x32

Gladiuz7

Jul 1 2009, 03:53

y2khippy

Jul 1 2009, 04:26

Hi Dwarden

Me again, I just finally compleated downloading the full game off steam, and tryed to open it after settting it up in a way that i know works for the demo. Atleast in a temporary way.

I just got the error below on start up
Addon 'CA_Modules_ARTY' requires addon 'CATracked2_us_m270mlrs'

The game then continued to actually start after i clicked ok on the error message. At the menu screen though it reported another error which follows.
Cannot load texture
ca\uifonts\data\fonts\etelkanarrowmediumpro25-02.paa.

EDIT (UPDATE) I went into other parts of the game and received other Cannot load texture message, and after trying a few things even copying files from the Demo across to the game and still no luck. So i on a last ditch effort attempted to Verify Integrity of game cache before backing up the files. But the verifycation restarted the download, and now i have another 12 hour download to cope with and i am running out of my monthly download as this will be the second time i am downloading the massive 8 gig of game files... Not Impressed at all.

Dwarden

Jul 1 2009, 13:37

Hi Dwarden

Im hoping you can help me, I am currently downloading the game off steam, but the demo off steam is giving me the problem.

I get the "Error Creating DriectX3D 9 Graphical Engine" error upon start up.
I have uninstalled Nvidia drivers in safe mode, and use a driver sweaper to make sure. Re-installed and ran the directX from the game folder provided.

Now after reinstalling the GPU drivers my Matrox was not fully set up on all three screens and the game ran after all this at a resolution of 3360 by 1050 (2x 1680 by 1050). I was shocked, so i exited, set up the Matrox to use all three screens, opened the game which worked once more with only two screens, and then proceeded to change the resolution only to my normal 5040 by 1050 (3x 1680 by 1050, the natual resolution of the monitors). This then utilised all three and its very pretty. But upon quiting the game and then instantly opening it up again i got the same error as before.

My System Specs are as follows
GTX295 186.18
Matrox TrippleHead2Go 6.52 drivers and 2.3.40 Firmware and 2.4.0.11 GXM software
Windows XPP 32bit Service Pack 3 (almost clean build one week old only)

ArmA 2 Demo Cfg is as follows
language="English";
adapter=-1;
3D_Performance=100000;
Resolution_Bpp=32;
Resolution_W=5040;
Resolution_H=1050;
refresh=57;
Render_W=1440;
Render_H=900;
FSAA=1;
postFX=3;
HDRPrecision=8;
lastDeviceId="";
localVRAM=911523840;
nonlocalVRAM=353370111;

this sounds like solution to your problem
http://forums.steampowered.com/forums/showpost.php?p=10489600&postcount=4

please post if it does or not

---------- Post added at 15:35 ---------- Previous post was at 15:32 ----------

Ok maybe it's me but I'm having some problems with the mod folders...

When in Arma 1 you just opened the launcher.. or created a short cut using the @<hidden> folder in the location...

So for STEAM how do I open a mod folder?? In the (MyGames) tab I can't add a new short cut there can I? Or can I just make another short cut on my desk top???

Also, I have seen on armaholic that you can download a launcher for Arma 2 can I still use that to launch it in Steam...

I couldn't wait till the Hard Copy release on the 7th... :)

for example you have somemod.pbo

so you take that mod and place into STEAM\STEAMAPPS\COMMON\ARMA 2\@<hidden>\addons

then add to STEAM ARMA 2 start paramater (or better windows shortctur) -mod=@<hidden>
it will result into commandline arma2.exe -mod=@<hidden>

---------- Post added at 15:35 ---------- Previous post was at 15:35 ----------

OK i Fix it need to update Vista Home Premium SP1 to SP2 then log into Steam right clic ArmA 2 in MY GAMES, property then Verify integrity of game cache, then it does a little download and ur away. WOOT

i said that quite often that update to SP2 is must for Vista users

---------- Post added at 15:37 ---------- Previous post was at 15:35 ----------

Hi Dwarden

Me again, I just finally compleated downloading the full game off steam, and tryed to open it after settting it up in a way that i know works for the demo. Atleast in a temporary way.

I just got the error below on start up
Addon 'CA_Modules_ARTY' requires addon 'CATracked2_us_m270mlrs'

The game then continued to actually start after i clicked ok on the error message. At the menu screen though it reported another error which follows.
Cannot load texture
ca\uifonts\data\fonts\etelkanarrowmediumpro25-02.paa.

EDIT (UPDATE) I went into other parts of the game and received other Cannot load texture message, and after trying a few things even copying files from the Demo across to the game and still no luck. So i on a last ditch effort attempted to Verify Integrity of game cache before backing up the files. But the verifycation restarted the download, and now i have another 12 hour download to cope with and i am running out of my monthly download as this will be the second time i am downloading the massive 8 gig of game files... Not Impressed at all.

you don't need to download WHOLE game, just do validate game cache (STEAM game list > select ARMA 2 > right mouse button > propters > local files > verify integrity of game cache and let it processs and redownload whats needed)

if it fails or succeed post here please

Pl4t0

Jul 1 2009, 14:07

I've actually found a fairly odd bug:

At first, the game worked perfectly fine, only a random crash here and there (which is entirely acceptable). A few hours in, right after trying out some multiplayer, I restarted the game and it wouldn't stop scrolling through the options in every menu option on the screen.

Any idea what that means? I'm going to update my drivers/launch straight from the ArmA 2 folder rather than Steam.

ericodapinco

Jul 1 2009, 15:04

My system specs are as follows:

Q6600 @<hidden> 2.7 ghz
6gb DDR2 800
Nvidia GTX 295
MSI P6n Diamond 680i SLI

and am getting horrible performance in this game, checked this site for tweks, and it was suggested that i rename arma2.exe to crysis64.exe (steamapps>common>arma 2>rename arma2exe to crysis64.exe)

the problem is that when i rename, or right click>properties and rename, the game is unable to launch from anywhere. Have to rename back to arma2.exe to get it to run. Any suggestions from steam users who managed to tweak this?

Same here, I can't change arma2 to crysis64.exe. No SLI for me:confused:
Arma2 in the Steam/steamapps/common/arma 2 is not an .exe file... it's a secured map containing the .exe file... no access to the Arma2.exe file.

Game is playable for me now with a little twiddling... not done yet bud I feel better about this game then yesterday.
min 30 FPS
max over 100 FPS (look in to the sky)
Make a 380 degree turn when FPS drops to 30 FPS, this stabilizes the FPS around 42 FPS (depending on the amount of AI) edit: To many buildings drop my FPS below 20 FPS again:(

Native resolution 1920 x 1200
Play now at resolution 1280 x 800 (also adjusted this resolution in de NVIDIA control panel... this made a real improvement for me) (ingame 3d resolution also 1280 x 800)

More NVIDIA controll panel settings:
Maximum Pre-Rendered Frames: standard 3 ( 8 made it worse for me but works for some people)
Vertical Sync: Force off
The rest of the settings are the standard 3D settings... changing them made the FPS drop for me.

In game video settings:
Texture detail: Normal
Video memory: Normal
Anisotropic Filtering: Disabled
Antialiasing: Disabled
Terrain detail: Normal
Objectives detail: Normal
Shadow detail: Disabled (better zero shadow then bad looking shadow... made the FPS go up again:))
Postprocess effects: Low
Next thing I'm going to try is to set some of this settings to high... bud first I'm going to play for a while... I've been twiddling since yesterday.

System spec's:
Sager 9262
Quad CPU Q9650 2,8 Ghz
RAM: 4 GB 800 Mhz
GPU's: 2 x NVIDIA 9800m GT SLI (NVIDIA 186.03 latest notebook driver)
Vista x64

edit: Windowed mode made the FPS drop for me but works for some with Vista x64.
186.18 drivers are not an option for my SLI problem cause my system is a notebook and there aren't any vista x64 186.18 drivers with a modded .inf @<hidden> laptopvideo2go.com ...yet.

y2khippy

Jul 1 2009, 15:33

Hi Dwarden

I am getting the first problem sorted, have to register to get my hands on the EVGA enhancer, so that hasnt been looked into yet.

On the second problem however, i did validate the cache and it was a tatal download again. Well this time it was 11 and a half hour download instead of a 12 hour one. The problem is still there though. Even after the validation. Thats now 15 or 16 gig i have downloaded and still have the error when loading.

Cannot load texture
ca\unifonts\data\fonts\etelkanarrowmediumpro34-00.paa.

And atleas one other in game...Is there anyway i can get the indervidual .paa files that i might be missing, because with two downloads already i cannot afford the download of a thrid... that would put me into the mid 20 gigs in only a couple of days and i dont have that to waste in a month. Please i am getting desperate here.

Edit, Actually i just got an email saying i have gone over my acount limits, so if i am to downlod the game a third time that will take 18 days on my shapped connection...

Damack

Jul 2 2009, 12:37

Ahhh thank you very much... I was missing the space lol... thanks again..

y2khippy

Jul 2 2009, 13:45

Hay Dwarden

Thank you so much for your patience and assistancee.. No seriously.

I have located the files elsewhere, and had to replace 20 meg worth of data to get the game running.

I dont know if i am out of danger though, as it seems my hard drive has been ripped to shreads by steam and i am currently working on moving all the data else where and all my steam games also.

So if i uninstall and re-install steam to another hard drive, all i have to do is unpack the Backup's of my games and i should be happy again.. well thats the plan.. but its a slow process movine over 800 gig of data, especially when some of it is corrupted.

MASSIVE GROUP HUGS GO OUT FOR DWARDEN for taking care of us in our time of need and frustration.:yay:

dicklewicz

Jul 2 2009, 13:55

Here is a fun problem that I am lucky to have.

Start Steam, start voice chat w/friend, go into game, click multiplayer, disconnects voice chat. So I tried 2 other games in steam (left4dead and TF2) and stayed connected in chat the whole time (1 hour each game). My friend has steam and no problems getting into servers in ARMA2. My game seems to not like any low ping servers?!? I can get into a few servers, but they have to be over 100 ping, this is of course if I am not freezing up completely at the Multiplayer server screen. My friend was able to connect to a server I created and that played fine. Seems I can host fine, just can't join anything I want to. Game runs terrific on my LAN. I have absolutely no issues there, joining or hosting. Just seems my computer and that Multiplayer screen don't agree on anything? Any help would be terrific!

I have updated windows Vista with all updates and just installed the newest Nvidia driver. I defragmented and did the cache thing. Pretty much tried everything.

Ish

Jul 3 2009, 09:38

I just got a quick question.. I've bought the boxed version, and when i try too add it to steam it says im playing a "non steam game" in my friends list. Any chance to make it say arma 2? Also, the friends overlay don't work.. Will try with latest patch (the hotfix) but i doubt it will be any different.

Pl4t0

Jul 3 2009, 12:38

a fairly minor and not-so-aggravating bug (or else I'm doing something horribly wrong) but when I die, and I've set my teammates to be playable in the editor, and I click "Team Switch" I'm not given any options whatsoever.

y2khippy

Jul 3 2009, 15:16

:smiley-grimmace:Well Im Back and getting VERY ****** OFF :smiley-grimmace:

I backed up my copy of ArmA 2, I uninstalled steam and bought a new hard drive as the old one is now corrupted... I Reinstall steam, and have to painstakingly update it with 5k download, i then reinstall the ArmA 2 from my back up. This said it would take 10 mins initially, and then it paused, and then a again and again, the restoration of the back up took 2 hours and 48 mins... And i try and start the game and i wants to now download the game again.

WHAT CAN BE DONE TO FIX THIS?

I HAVE ALREADY SPENT 16 or so GIG downloading a game i paid for. I HAVE NO DOWNLOAD CAPABILITYS ANYMORE AND I AM OUT MONEY WITH NOTHING BUT 30 mins GAME PLAY TO SHOW FOR IT! :smiley-grimmace:

I know Dwarden you are hear to help, but this is getting seriously frustrating, and im at the point of requesting my money back for this game, and purchaceing off your companys competitors. I dont mean buying in a store, i mean buying Operation Flash Point instead.

Dwarden

Jul 3 2009, 17:54

next time instead of using STEAM backup feature , just copy the content of STEAM folders into e.g. USB drive then on system install the STEAM and copy old steam over it, then do verify cache on all titles ...

internal STEAM backup is worth mainly for VALVE titles in GCF file 'archive'

for ARMA 2 it will be enough you just backed up content of STEAM\STEAMAPPS\COMMON\ARMA 2

so you only need to backup/transfer like 9GB
but make sure you do verify game cache afterward on new location/install afterward

also it would be nice if you take deep breath and explain Your problem in readable calm english instead of angry english :)

archie44

Jul 3 2009, 20:07

Bought ARMA 2 today from Steam but I can't begin install because "Steam servers are too busy." I ran through the troubleshooting procedures given by Steam's knowledge base (all anti-virus/firewall off + relogging in), but I still can't download it! Any idea?

I can download other patches and demos from Steam.

dicklewicz

Jul 3 2009, 22:38

So do you have to freak out in this forum to get an answer?
I think I explained my problem calmly and I am patiently awaiting ANY response.

Dwarden

Jul 4 2009, 04:18

dickle some of connectivity bugs are being fixed so if all goes well next patch may resolve such problems ...

dicklewicz

Jul 4 2009, 04:38

All ya had to say. Thank You. At least I know now to go play something else for awhile.

djdeco

Jul 4 2009, 22:26

AMD Athlon 64 X2 Dual Core Processor 6000+ 3.01 GHZ
4GB RAM
NVIDIA GeForce 8800 GTS 512
THIS IS MY SYSTEM guyz i really want to play it what shall i do i mean which setting shall i choose for every video req like
Object Detail:very high(examples)
Shadow:very high
Anit alaising:very low
please tell what to do and what to use please guyz thanks

Kwebulicious

Jul 5 2009, 16:15

Ok so please try and help me the best you can... ive figured out how to deal with my frame rate but even since i played the game all sun affects and any form of dust, sprayed water from the front of the aircraft carrier at the homescreen, and any direct view into the sun will dramatically discolor everything like bushes and even turn distant trees white... It can get bad enough that i will have complete red outs except for the weapon in my hand... My computer was fairly top end when i got it 4 years ago and i dont have any reason to say the components are the problem... although i may be wrong =]

p.s. the discoloring is DRAMATIC the plants are like rainbows they arent anywhere close to what they should be

Vostov

Jul 6 2009, 18:58

Damack

Jul 6 2009, 19:26

Hey I'm not sure if this has been asked yet.. But is STEAM going to auto update Arma 2 if a new update comes out??

Halochief89

Jul 7 2009, 06:22

This has already been asked but I have to ask. I got ArmA 2 for steam it worked I accidentally installed the better 1.02 patch dunno with steam if it corrupts it or not. But now with some mods when I try to start arma 2 the securom thing pops up and tells me I need the CD/DVD.

Kwebulicious

Jul 7 2009, 06:41

Is there anyway to get all my effects right? the only stuff getting screwed with is any airborn dust kicked up by helicopters or smoke from a gun.. and the second problem is if there is any direct lighting, backgrounds start getting messed with... My problem is that everything will discolor to solid pinks and reds in the scream like there is paint on my monitor

IronCadian7

Jul 7 2009, 07:40

I downloaded the demo from steam, then tried to run it and it just crashes, nothing else happens. Wondering if there is a specific fix? Sorry didnt want to dig through all the pages of replies.

My rig:

Vista x64
Nvidia 9500GT 512mb DDR3 RAM
HDD 650 gb I hinestly dont know the make and model
5 gb RAM
AMD Phenom X4 CPU

Dwarden

Jul 7 2009, 17:07

I assume this is a Steam problem? Apologies if this isn't.

-maxmem=2047

Where does this go? (yeah, I'm a noob)

Also.. I can't install SP2.. because.. my.. internet connection is horrid. I'm on a 56k dial up.. I borrowed a friend's connection to get this game.

I just get Out of Memory messages occasionally.. and I have 155gb free.. I assume it didn't need THAT much?

Out of memory (requested 3933 KB)
Reserved 294912KB
Total Free 15497KB
Free blocks 980, Max free size 3462KB

My specs:
3.2ghz intel i7 cpu quad core
6gigz o' ram
64bit OS
155gigs of memory left (maybe I need a terabyte?) <= EDITED HERE
x2 280gtx graphics cards SLI (with the sticky recommended driver.. I still get flickering long distance graphics..)

Help? :confused:

My post:

http://forums.bistudio.com/showthread.php?t=78557

and a related post I found same issue.. older post.. still unresolved according to the contents of the conversation within:

http://forums.bistudio.com/showthread.php?t=73668

Also, do I need to up my virtual memory? Its at 6434 mb... and I could go higher...?

if you want edit your windows shortcut for arma then just add it at end

OR left click to select ARMA 2 in STEAM games list then right mouse button > properties > set launch options
be aware this method force this option to be used for ALL windows shortcuts

---------- Post added at 19:06 ---------- Previous post was at 19:05 ----------

Hey I'm not sure if this has been asked yet.. But is STEAM going to auto update Arma 2 if a new update comes out??

yes if you have set it to autoupdate (if it fails or want use manual trigger just validate the game files cache)

---------- Post added at 19:07 ---------- Previous post was at 19:06 ----------

I downloaded the demo from steam, then tried to run it and it just crashes, nothing else happens. Wondering if there is a specific fix? Sorry didnt want to dig through all the pages of replies.

My rig:

Vista x64
Nvidia 9500GT 512mb DDR3 RAM
HDD 650 gb I hinestly dont know the make and model
5 gb RAM
AMD Phenom X4 CPU

please make sure You have Service Pack 2 for Vista 64bit
then installed latest DX9 march redist as admin

http://forums.bistudio.com/showthread.php?t=77880

IronCadian7

Jul 7 2009, 17:42

Alright got service pack 2 and then I download the DX9 Redist that was the link? I guess I will try that

Dwarden

Jul 7 2009, 17:50

kklownboy

Jul 7 2009, 19:25

when can i play Steam version ARMA2 WITH OUT Steam starting... could with ARMA1 atari? or am i missing somthing. Its a total deal breaker for me now and just use .DE version ,that shares the arma2.cfg with Steam. (And Steam made my .DE english! whoo). So is there a offcial way to run the game with out Steam......?

ALUMINUM13

Jul 8 2009, 17:12

Ive been having a problem with the game. I bought the game off of STEAM and when im in the mission Razor Two where you have to find the prisoners it always freezes. I check Task Manager and it says not responding. It aways does this about 15 min into it everytime.

My specs are:
Q6600 @<hidden> 3.0
GTX280
EVGA 790i
OCZ 2GB DDR3 1600mhz ram
Windows 7 32bit RC

Help please.

7unk3r

Jul 9 2009, 12:32

Hello and sorry for the noob question but it´s the first game i purchase trough steam...

i bought arma 2 yesterday and tried to install the game, however, i really dont know if the game was installed successfully because it shows installed but every time i try to launch the game it keeps updating itself and when it gets to 99% it frezes and get back to 0, and if i try to launch with the option to not update it simply does not launch the game...

What´s going on? can i play without updating? is the game really installed or ´´updating´´ means that it is installing the game? and why it stops in 99%?

thanks in advance and sorry for my bad english....

alrik

Jul 9 2009, 14:46

Is it normal when I minimize the ArmA 2 to work on editing some text on desktop (For scripting) when I maximize the ArmA 2 window again the windows crashes and computer get restarted?

Intel Core 2 DUO 6400 2,13GHz
1x2GB RAM DDR2 667
Ati Radeon X1600 Pro
Windows XP SP3
Obiously Steam Version of ArmA 2...

Any Ideas?

Fitzee

Jul 10 2009, 00:25

You could use window mode when editing. It's faster than alt-tabbing.

Typhon247

Jul 10 2009, 22:39

Please help me!

Well, I was very excited to play Arma 2. So, I downloaded it from Steam and once I finally entered the game everything looked fuzzy. No matter what I did I couldn't fix this problem so I read somewhere that downloading the patch would help fix it. So, I downloaded the patch only to have it tell me that it cannot find the CD. After this, I come onto the troubleshooting forum and scroll through the problem until I read Boomer9's problem. It was exactly like mine so I followed your steps to fix it but when I try to verify the game cache it just quickly goes to 100% and then exits the window.

Is my only answer to this problem to re-install the game? :(

EDIT* It won't even let me delete the local content from my computer to re-install the game >.>

MJK-Ranger

Jul 10 2009, 23:24

Don't use the patch from ArmA2. Steam has the newest patch installed...

Typhon247

Jul 10 2009, 23:26

I know that now, but is there anyway to fix it? :(

*EDIT
I restarted steam and I am currently verifying it again. It is not skipping to 100% It might acatually be working :D

Johnds

Jul 11 2009, 05:02

Hello,

ARMA 2 running fantastic on my sli i7.

Does steam include a manual for the game?

John

MJK-Ranger

Jul 11 2009, 06:07

Hello,

ARMA 2 running fantastic on my sli i7.

Does steam include a manual for the game?

John

Hi. Here: http://cdn.steampowered.com/Manuals/33900/ArmA%202_Manual_US.pdf?t=1247096871

Cheers

Johnds

Jul 11 2009, 06:36

THANKS! What a relief.

John

SS9

Jul 12 2009, 08:07

Dwarden

Jul 12 2009, 20:22

SS9 i get the question only once but that's when STEAM is started for first time
yet i use external windows shortcuts to launch it ...

SS9

Jul 13 2009, 01:41

Yeah, it might only be when I have turned the computer off, which is frequently. And I use Kegetys' old arma launcher to control mods and connect to favorite server.
There's no launch command for full screen? I just did it again, it's like a reflex. I click launch and walked away, and when I came back, it hadn't launched!

ZoLoco

Jul 14 2009, 12:30

Steakslim

Jul 14 2009, 21:20

Every time the game starts I get the option to launch windowed or full screen. How do I get it to always launch full screen? It's really annoying because I usually want to let it boot up and go get a drink or something.
The ESRB notice: I'm aware that my game play experience may change on line. You don't have to tell me every time I click multiplayer. I got it after the first 400 times.

I only get that launch screen if I try to run ArmA when Steam isn't already loaded. Load steam first, then click your ArmA shortcut, it shouldn't prompt the windowed/fullscreen box. Steam tends to do this with other games, asking if you want to play singleplayer/multiplayer, which is redundant because for a lot of games, it takes you to the main menu where you have to select them again anyways.

Bulldogs

Jul 15 2009, 06:27

Hi , bought Arma 2 off steam. Starts and runs well, exept the normal graphic loading when u return to base or something after u die.

But when i play campaign or multiplayer, i get small freezes each half a minute. Not bad really, a freeze that lasts a second tho. But flying a chopper with my mates inside, close to ground, its not fun to get 'unfrozen' inside a tree ;)

Anyone else experience this and/or have a solution?

I get this same thing, but only when playign under Windows 7, under Vista and XP I don't experience it at all so I figure it must be something I installed on Windows 7, no idea what though.

ZoLoco

Jul 16 2009, 09:06

I get this same thing, but only when playign under Windows 7, under Vista and XP I don't experience it at all so I figure it must be something I installed on Windows 7, no idea what though.

Ok. Hope its gone in W7 OEM. No problems with the game in Vista, but it runs smoother on W7. :D

Rip31st

Jul 16 2009, 17:25

Steam prevents buldozer from running.

Dwarden

Jul 16 2009, 23:20

Steam prevents buldozer from running.

it's problem with all old tools ...
most likely this will be resolved with new toolset

donzauker

Jul 18 2009, 12:48

I've buy Steam version of ARMA 2, I'm surpised that there's not italian language (like DVD version).
There's any way to add italian language to Steam ARMA 2 ?

blkjag

Jul 18 2009, 20:31

I thought I shared some history I had in getting this game to work with Steam after purchasing it 3weeks ago and now as of today, the game is launching thru steam and I was able to start learning the basic of the game.

See Sig for sys spec.

I was having two major issues
1. Direct 9 graphical error, even though I have direct 10
2. Steam will always give me this message "this game is currently unavailable, please try again at another time"

Purchased game around July 4 or 5th

July 8 - my message to Steam

I purchase this game (AARM2) via your steam game - ever since I downloaded the game, the game has not work - I first got an error msg about missing dx 9, when I launch in full mode, and then i when try to launch in window mode and it came up then crash. Now, even since then, I been getting a message that said, "this game is currently unavailable, please try again at another time"

I went to your support site, and try every suggestions that was mentioned to try to get rid of this error, and still nothing, i have uninstall drivers, reinstall OS, visual c, etc. run in admin, reinstall the game twice, reinstall steam several times.. and still nothing

July 10 Steam reply

Please disable your background applications. Please disable NOD also. After doing so, please reload your game files by deleting the local content and reinstalling. If that doesn't resolve the issue, please uninstall NOD completely. Sometimes just having that software also on the system causes Steam not to function correctly. please send us your msinfo32.nfo

July 12 my message to steam

i have follow everything what you had advise, disable all backup services, delete the local content, reconfig my router, etc. I have spent almost 60 hrs in trying to resolved this. This is the only game I am having issue with. I have CODWAW, EmpireatWar, American Army3, DoD, counter strike and they all work fine thru your service, with all the background services running, including the Antivirus, without me going thru all of this.

July 15 steam reply

It appears that you have SLI enabled for your graphics card. Please disable SLI and retest.

July 15 my message to steam

I do not have it enable.. as per the Nv control panel

July 16 Steam reply
Please ensure you have the latest DirectX on your system. http://www.microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

Please try the following, Exit Steam entirely.

Browse to your Steam installation (Usually C:\Program Files\Steam\)
Rename the "steamapps" folder to "old_steamapps"
Re-launch Steam and re-install the game.
Once the installation is complete, test the issue.
If the issue is not resolved, you can rename the folder back to avoid having to re-install other games.

July 17 my message to steam

Believe it or not, the game work after doing that.. even with everything load, anti-virus, services, etc.

So you mean to tell me I have waste almost 3 weeks and hours working on this since I purchased the game- un-installing the games, others applications, downloading and re- downloading, drivers, etc and that the issue was simply this solution, regarding your folders?

Summary

So after spinning my wheels mostly on my own, the problem was solved with this simple solution and it has to do with steam. I am able to launch the game in full and windowed - I had yet to really involved myself in learning the basic.. hopefully, this weekend I will be able too.

So, if anyone is having issues, maybe this step by changing the steamapp folder to old and follow the steps in the bold bullet points , may save you some grief and times in the long run... no harm in trying it right.

fakename

Jul 19 2009, 01:52

blkjag

Jul 19 2009, 07:16

Hi, I just dowloaded the Arma 2 demo from steam, but every time I try to play it, i just get a message htat say "Frequency out of Range". I've looked this problem up online but all the solutions i found on other websites are not working. Any suggestions? My specs are AMD Phenom 9100e Quad-Core Processor 1.8 Ghz, 4 GB RAM, and an ATI Radeon 4670

Sound like is a monitor issues - usually "freq and out of range" message relates to your monitor not capable of supporting a certain resolution.. I currently working on similar issue myself with one of my monitor.

You need to check to see what is your monitor display native resolution and change it to that or perhaps lower and see if that work.

fakename

Jul 19 2009, 13:06

Sound like is a monitor issues - usually "freq and out of range" message relates to your monitor not capable of supporting a certain resolution.. I currently working on similar issue myself with one of my monitor.

You need to check to see what is your monitor display native resolution and change it to that or perhaps lower and see if that work.

I believe my native resolution is 1680x1050, as that is what it says on the little black sticky stating the monitor's specs that I still have at the bottom from when i bought it. The problem now is changing the game resolution outside of the game. I have tried the whole "Steam/games/Arma2/properties/set launch options, and its just not working. Maybe I typed it wrong or something. What I typed was w 1680

Dwarden

Jul 19 2009, 13:24

fakename

Jul 19 2009, 14:22

use windowed mode (offered by STEAM when game is run from STEAM games list) or by right clicking menu in STEAM games list
and if it not helps changing ingame resolution (in GUI video options) then check arma2.cfg and change monitor frequency in line with refresh=

---------- Post added at 15:24 ---------- Previous post was at 15:23 ----------

@<hidden> your issue sounds like very corrupted file cache

STEAM isn't offering windowed mode when I run it from the menu, and I can't find it in the right-click menu either. Also, I'm kind of an idiot when it comes to computers and I'm having trouble finding arma2.cfg. I searched it in my start menu and nothing came up.

Steakslim

Jul 19 2009, 14:29

Arma2.cfg should be located under Documents/ArmA2

fakename

Jul 19 2009, 14:36

Arma2.cfg should be located under Documents/ArmA2

Thanks, I found it, but now it says "Adobe reader cannot open ArmA2Demo.cfg because it is either not a supported file type or because the file has been damaged"

Steakslim

Jul 19 2009, 16:05

open it with notepad

blkjag

Jul 19 2009, 17:09

@<hidden> your issue sounds like very corrupted file cache

I figure that.. I even ran their game integrity/cache program.. I am just a little upset, since from the date of buying the game, I been dealing with this for 3 weeks and invested over 80 hrs of personal time - installing, reinstalling, OS, apps, drivers, routers config with other programs and apps that not even related to the steam.

And, constantly repeating downloading the game, the problem was as simple as that, which they should had offered as one of the first step to do first, instead of telling me goes through 100 others things before suggesting this one.

@<hidden> - one of the biggest marketing hoodwink are being done by Monitors companies, what they claimed they can do and what they can actual do are two different things -

Here some good sites you can go to learn more about monitors and their capabilities http://www.widescreengamingforum.com/wiki/index.php/Master_Monitors_List & http://www.tomshardware.com/reviews/Peripherals,2/Monitors,8/ - the forum also have some great info

GDN2112

Jul 21 2009, 15:04

Hi guys have any of you had problems with the mission badlands I have had to complete 2 missions on my own because the team is stuck and not moveing they report in but do not move I have tried every way to move them on but alass they stay in the same place at the beinging of each new mission they just move location but stay in the same place. It is P***ing me off a bit

Steakslim

Jul 21 2009, 17:12

Not entirely sure if that's steam related, it just might be a bad bug or glitch in the campaign. Check out the rest of the Troubleshooting forums (search function), it might have been discussed.

nuxil

Jul 21 2009, 21:34

Got a Issue..

So i fired up steam.. it seams like it updated. and something is defently screwed up.. like..

when i make a mission in the editor and export my mission as multiplayer.. where on earth does the Mymission.pbo file get stored ??

C:\Program Files (x86)\Steam\steamapps\common\arma 2\MPMissions

contains 1 file.. a readme.txt. all that files says is "MPMissions" ..

when im in arma i can go into multiplayer and host the mission .. so i took a look in

C:\Documents and Settings\XXXXX\Local Settings\Application Data\ArmA 2\MPMissionsCache

and nope. its not there eigther..
so where is my mission file ? :banghead:

Edit:

fixed by reinstaling steam.

iwilldie

Jul 22 2009, 11:54

How do you obtain patches for the steam version?

Steakslim

Jul 22 2009, 13:36

Steam version in it's current incarnation does not need to be patched. When patch 1.03 is released, it should be made available via steam either the moment of release on BIS' site, or shortly after. Steam will automatically update your game (you may have to close steam and start it again to prompt it) so long as your Update settings for the game allow it.

Currently Dwarden (or one of the mods) mentioned that the patches obtained by means other than Steam will infact 'not' work on Steam, if I read his comment correctly.

Cpt Tommo

Jul 22 2009, 18:32

hey ive had a quick look but couldn't really find anything of use

ive downloaded the arma2 demo through steam
and i keep getting ''data file too short 'addons\structures.pbo'. Expected 491679676 B, got 458582400 B'' when trying to open the game through steam

is there a fix for this please

thanks tommo

Steakslim

Jul 22 2009, 20:57

did you right click on the game in your Games window and look in Properties. Go to the Local Files tab and click "Verify Integrity of Game Cache". If you've already tried that and it didn't work, I'd suggest trying to redownload/install the game, which I know is frustrating, but that's all I can think off unless you want to look through the other 11 pages of this thread for possible solutions.

Cpt Tommo

Jul 22 2009, 21:42

i got it to work somehow(just opened steam and it was updating) started to open up after but said error: shader model 2 not supported anymore =[

i guess this probably means my laptop aint good enough. worth a try =[

guess ill have to wait for the xbox version afterall

Steakslim

Jul 22 2009, 21:50

Yeah I believe the game requires shader model 3 ready video cards.

Spamurai

Jul 23 2009, 05:44

How many of you have the nv4_disp.dll crash issue?

have any of you tried disabling the Steam In-Game overlay?

fuzzhead

Jul 24 2009, 00:53

So I bought ArmA2 from steam. Having some problems with it.

Downloaded just fine, and the game status says 100% - Ready. Launching it gave me an error, saying: "Game is currently unavailable. Please try again later."... waited for a few hours, and tried to troubleshoot the problem etc, no change.

Checked the ArmA2 install directory (Steam/steamapps/common/arma 2/) and noticed that there was no arma2.exe in there, so I got Spriggan to send me his arma2.exe through xfire, spriggan also go arma2 through steam.

Yay now I can load the game with no error! So I got on a domination server (since nothing else avaliable), played for a bit with no problems. Then I got on a berserk server, played for a bit and no problems, so thought everything was working fine now. But it turns out that I cannot join a bunch of servers, including trufrets dedicated test server. When I try to join it just gives me a blank "Multiplayer Setup" screen dialog, I cant see any of the mission info like you usually should be able to - no Mission / Description / Map / Side information. I can see players typing in chat and server messages, and I can press the "OK" or Disconnect buttons. When I click on the "OK" button it will say "Receiving mission file 0 KB / 0 KB" but Ill never get the file and it will just hang there forever.

I cant help but think this is related to the installation method but cant seem to get any support from steam, I put a ticket in but still waiting 12 hours to hear back.

The TG server is one of the ones I cannot join, which really sucks...

So any help from ArmA2 steam users would be greatly appreciated. I wish I didnt buy from steam but it was my only option since game not carried at any retail stores here.

When I join the server, it looks like this:
http://img204.imageshack.us/img204/482/armaproblem1.jpg

When I click on OK, it looks like this and stays like this forever:
http://img204.imageshack.us/img204/3144/armaproblem2.jpg

Steakslim

Jul 24 2009, 21:03

fuzz, delete the ArmA2.exe Spriggan sent (or move it to another folder), and check the game cache integrity for the game in the properties by right clicking ArmA2 under your games tab, selecting Properties, and move under the Local Files tab. If you were missing the .exe file of all things, you might of been missing something else. Steam might of misreported the game being 100%.

Edit: I'm going to start assuming people already tried this.

Spamurai

Jul 25 2009, 01:31

Delete anything you received from Spriggan.

Right Click the ARMA2 Launch Shortcut in Steam.

Click Properties.

Click the Local Files tab.

Click the Verify Integrity of Game Cache button.

Let steam do it's thing, it will check your game cache and then repair itself if it's become corrupted or is missing elements.

rafo23

Aug 3 2009, 06:03

Ok, so here's my problem, up until recently when I started A2, it erases all the controls I've mapped for my Saitek X52 joystick and each time I start the game I have to map them again, which is annoying... Also, when I map the controls, I noticed if I pressed next or previous (to go to the next control) it crashed my game, and it happened each time I did it. I checked the .cfg files in my Documents\ArmA II and set them to read-only, which they weren't, but still it keeps crashing.

Please help.

novafluxx

Aug 4 2009, 03:11

What exactly does -maxmem=2047 do?

I've used -maxmem=4096 because I have 4GB of memory. Is this the wrong thing to do? I'm not exactly sure how to use this switch.

Dwarden

Aug 4 2009, 10:26

What exactly does -maxmem=2047 do?

I've used -maxmem=4096 because I have 4GB of memory. Is this the wrong thing to do? I'm not exactly sure how to use this switch.

-maxmem is limited to 2047 max (anything over is set back to this max)

it defines the memory ARMA 2 will use at once yet it's not exactly limited because there is also
this http://www.bistudio.com/developers-blog/breaking-the-32-bit-barrier_en.html (http://www.bistudio.com/developers-blog/breaking-the-32-bit-barrier_en.html)
which allows the engine use more than maxmem defined value ...

if you use -maxmem=1023 the engine may use more via OS by solution described in blog link.

lot of people will experience crashes and unstability with 2047
due way how OS handle resources and some drivers can do quite ugly stuff so using smaller value may help
(definitely suggested to try experiment with lower value in that case)

novafluxx

Aug 5 2009, 00:26

Thank you for the reply! I was surprised to see an official response.

So the game currently, is only able to take advantage of 2047MB of RAM, regardless of how much RAM I have in my system? Do I understand this right? Even 32-bit systems can address over 3GB of memory, so I'm not quite sure I understand this.

However I've experienced NO issues while using "-maxmem=4096" switch.

If I do I'll consider leaving it out, or trying 1023 as you suggest.

Dwarden

Aug 5 2009, 17:15

you got it incorrectly the game is able use more than the maxmem value using the memory w/o address solution ... it's not just 'used' by the process directly

and like i said numerous times -maxmem=4096 doesn't nothing else than being equal to -maxmem=2047, as 2047 is maximum value for this switch

Dwarden

Aug 5 2009, 21:37

STEAM version is now 1.3.0.58627 too make sure You update

Spamurai

Aug 6 2009, 04:00

Steam is attempting to re-download all of ARMA II instead of patching it.

The Patch File is listed at 134 megs.

Steam is attempting to download several thousand megs.

Tex Zero

Aug 6 2009, 06:16

Steam is attempting to re-download all of ARMA II instead of patching it.

Yep. Steam users have to download practically the whole game again. See this thread ==> http://forums.bistudio.com/showthread.php?t=82819

docrings

Aug 6 2009, 09:17

My steam "patch" today has introduced a whole new host of problems with graphics and frame rate [NVIDIA 8800GTS, Dual Core CPU, 4GB RAM, WIN XP]

1) subjective frame rate slow down.. I'll have to test this.
2) graphical tearing and "white frame" outlines of polygon objects, had to reboot game (first time to ever see this!)
3) transition screen "receiving..." screen bugs when in map mode (can see the map red square selector graphic on top of the screen. Not every time.
4) "Sound not found" (or something similar) on initial scenario loads (only on Red Harvest, which was the scenario saved at the time of the auto-patch.) I didn't see that warning when loading the game a third time, and playing the next scenario (Razor Two).

Still havin' fun, though!

Cheers,
Doc
:cool:
--------------

UPDATE on my problems: Found this thread at the Arma 2 Steam forum:

http://forums.steampowered.com/forums/showthread.php?t=932314

FOR NVIDIA USERS AND PATCH 1.03

ARMA 2 : patch 1.3.0.58627
ARMA 2 PATCH 1.03
-----------------------------------------
Copyright (c) 2009 Bohemia Interactive. All rights reserved.

SYSTEM REQUIREMENTS:
--------------------
- DirectX 9 March 2009 is required and should be updated during the patching process automatically as needed or you can update your version of DirectX from www.microsoft.com/windows/directx/

NOTE:
- It is not recommended to use any savegames created in versions 1.00 or 1.01, if you use a savegame from 1.02 some of the fixes may not apply to that game in progress until the beginning of a new mission.

Also found this thread here:
http://forums.bistudio.com/showthread.php?t=76908

NVIDIA video card(s) owners read here!
0.
You shall try first NVIDIA 190.38 WHQL drivers or later !

1.
NVIDIA videocard owners with newer cards and drivers supporting PhysX when disabling PhysX acceleration:
* this works mainly for 260 and newer GPU serie resulting into performance boost for NVIDIA users in ARMA 2 , yet some 9800/8800 users experiencing smoother gameplay

A. Control Panels > NVIDIA PhysX control panel > Settings > switch to NO PHysx acceleration ! > click on "OK"

B. Right click on desktop > NVIDIA Control Panel > Set Physx configuration > Select "Disabled" > Click on "Apply"

2a.
NVIDIA SLI owners shall try use NVIDIA beta SLI profile ARMA 2 support for 186.18:
http://www.nvidia.co.uk/object/nvidi..._patch_uk.html
Anyone who install nVidia's fix should deinstall/remove the EVGA fix before installing nVidia's, if its previously installed!

2b.
NVIDIA SLI owners can gain additional performance by using EVGA SLI enhancer

http://www.evga.com/articles/00463/Default.asp

more info and feedback about EVGA SLI enhancer here: http://forums.bistudio.com/showthread.php?t=76369

3.
VISTA (64b) users may get way faster/smoother framerate in windowed mode with 186.18 drivers

4.
force VSYNC off in drivers

Garbol87

Aug 6 2009, 21:38

Also ppl are saying that the multiplayer lobby has changed but I dont see it I get error when entering a multiplayer lobby and I get the old one. I also get the "no sound found" or something that docrings described. I also got those white squares on markers in every mission one were transparent other were solid. It only showd those squares on objective linked markers. I'am re-downloading ArmA2 now to see if it was a patch problem.

Dwarden

Aug 6 2009, 22:20

Perrinmajor

Aug 7 2009, 09:34

After update took 2 days to compete now im getting an error when ever im trying to start the game it says

ERROR compiling pixel shader PSTreeAToC:0

dman777

Aug 7 2009, 10:37

[RIP] Luhgnut

Aug 7 2009, 13:45

ever since i updated to 1.03 2 days ago, i dont see any servers listed when i try and play multiplayer. Someone told me its cause theres no server host files patch out yet but thats not true. Some people are playing online now. Is it just steam users? is it a corrupt download of the patch i had? I validated the game thorugh steam and all files checked out ok. Its been 2 days now so there should be some servers showing up under multiplayer but still none! Please tell me what the problem could be otherwise im going to deinstall and reinstall the game all over again.

Well, my server hosting company has had nothing but trouble with the patch. Seems that the automated system can't handle the big file size? Anyway that's what they are saying. But they finally got it patched. But I can't test it cause the game is basically unplayable for me. But if I look at the server logs, the server crashes and auto-starts. People are playing on it, but it just goes bonkers. I don't know what to do. I'm paying for a server and paid for a game that was workable, and now I got squat.

DarkMellie

Aug 8 2009, 06:14

When I double click the arma 2 icon in Steam to start the game (patched to latest) the 'now launching' small steam window appears and flickers non-stop.

Anyone else have this problem? I'd bloody hate to reload it, seeing as it's a quarter of my monthly bandwidth.

shahin

Aug 8 2009, 20:09

Steakslim

Aug 8 2009, 22:37

i use german version.1.0057..i download patch 1..and 1,2 a,d 1.3...whenever i use tha patch..i see this massege...'cant find arma2 or u have to unistall or install is crupted' somthing like this..and icant use patches...somone help me..thanks

This thread is for those who have the game via Steam. If you have the german version you may want to start your own thread, you might not get as many people to notice your problem in this thread since it's intended for those who purchased the game under that particular service.

Also to ask the stupid questions...is your version a legit copy? By that I mean you didn't just pirate the game did you? Are you using a no cd hack or anything like that? Did you for some reason rename the EXE file itself to which it cannot find the game?

Spamurai

Aug 9 2009, 04:48

I don't buy the "Don't Blame us, It's Steams Fault for 4.3 gigabyte patch download".

Bohemia Interactive has known that this is how Steam works since the days of ArmA 1. This is why we didn't have auto-updating for the Steam Version of ArmA 1... and Bohemia went ahead anyways with Auto-Updating ArmA 2 via Steam.

When you drive by the "Bridge is Out" sign for mile after mile, you don't blame the highway department for not having the bridge fixed after ending up in the river.

Weaksauce Bohemia. Your ArmA 2 community on Steam is not happy about the prospects of multi gigabyte patches to fix their beloved game.

DiMoose

Aug 9 2009, 19:23

Started Arma2 today (STEAM Version) and noticed that it had been updated to v1.03 (v1.02 before). Was going to continue doing the missions, but it just CTD's with an error that i cannot load the savegame files(!?):

Cannot load "C:\Documents and Settings\ProfileName\My Documents\ArmA 2 Other Profiles\DiMoose\Saved\ca\missions\campaign"

Tried to rename a couple of the savegames as well as removing some of them, but can't get it to start. I've seen some posts about this earlier, but for me it stopped working with v1.03!

Any thoughts?

MJK-Ranger

Aug 15 2009, 18:29

New Steam Update:

ArmA 2 Update Released
August 14, 2009, 5:55 pm - Valve - Product Update
Updates to ArmA 2 have been released. The updates will be applied automatically when your Steam client is restarted. The specific changes include:

ArmA 2

- Fixed an objective impossible to complete in the campaign mission Badlands

Files that has been changed:

..\Steam\steamapps\common\arma 2\AddOns\
- missions.pbo
- missions.pbo.bi.bisign

Cheers:)

Dwarden

Aug 15 2009, 19:30

Just another note: Dedicated server is now on STEAM in TOOLS section of CLIENT (see first post) ...

The Stig

Aug 16 2009, 22:09

HELP PLZZZZ

ok i downloaded my game from direct2drive how do i get it to update

That1Guyy

Aug 17 2009, 01:11

So I downloaded ARMA 2 off of Steam, but when I attempt to start the game I get the error:

Bad serial number given in setup.

I've tried deleting the game and then redownloading it, verifing the cache files (before and after redownload), and I also followed the link given about this problem near the beginning of the thread.

Unfortunately, nothing has worked, and I still get this same error every time I try to start the game. I made a thread on the Steam forum, but I've yet to receive a reply after 24 hours.

Help is appreciated.

Steakslim

Aug 17 2009, 17:45

HELP PLZZZZ

ok i downloaded my game from direct2drive how do i get it to update

D2D isn't Steam, wrong thread. You should be able to patch manually. Just d/l the 1.02 and 1.03 patches and install them in order.

Dwarden

Aug 17 2009, 19:41

Steakslim

Aug 18 2009, 01:01

D2D isn't Steam, wrong thread. You should be able to patch manually. Just d/l the 1.02 and 1.03 patches and install them in order.

correction, and sorry if this was mentioned already. I think you're supposed to get your patches from D2D itself. I never used the service so I don't actually know.

shahin

Aug 19 2009, 12:19

This thread is for those who have the game via Steam. If you have the german version you may want to start your own thread, you might not get as many people to notice your problem in this thread since it's intended for those who purchased the game under that particular service.

Also to ask the stupid questions...is your version a legit copy? By that I mean you didn't just pirate the game did you? Are you using a no cd hack or anything like that? Did you for some reason rename the EXE file itself to which it cannot find the game?

no rename..i have arma.exe file..but path cant find that...pirat?usa troops pirat or me?

ultimateflashpoint

Aug 19 2009, 18:29

My steam version is patched to 1.03 but it is not playing any sounds at all. I have checked all settings and nothing. I cannot get it to make a peep, but everything else like windows sounds still work fine.

djdeco

Aug 19 2009, 23:05

--------------------------------------------------------------------------------

Amd Phenom II X4 945 Processor 3.00 ghz
4GB ram 1600 mhz
System type:32
Nvidia Gtx 295

i dont understand this game ppl i got nice pc but my fps is low

---------- Post added at 11:05 PM ---------- Previous post was at 11:04 PM ----------

what can i do I WANT MY MONEY BACK FFS its not working even in gods computer

Steakslim

Aug 20 2009, 03:04

working fine with mine. What OS are you running? If it's Vista, the majority of the users here have mentioned that moving back to XP, or to Windows 7 will yeild better results. Also I'd suggestion posting in some of the threads regarding Nvidia cards as I recall many having issues running the game smoothely on a gtx295.

Dwarden

Aug 20 2009, 15:54

Sick1

Aug 24 2009, 16:30

Can I get the beta patch with steam? Anybody know or tried it yet with steam?

Steakslim

Aug 25 2009, 01:48

they install like mods, so yes they do work. However you have to manually d/l and install them, they are not available through Steam themselves.

kylania

Aug 25 2009, 04:41

Not seeing more than like 40 servers online right now. What's up? :) I KNOW my unit's server is online, people are on it.

SS9

Aug 27 2009, 15:29

check your filters.
can you PLEASE get rid of the ESRB notice?!

Steakslim

Aug 27 2009, 18:53

isn't the ESRB notice on all copies distributed in the US and Canada? I don't think they have a choice. It's no inconvenience so I'd stop whining about it and let them tend to more important issues.

Newtoma

Aug 27 2009, 21:33

After playing an online match for about 30-40 minutes my screen goes blank. I can only see other players text. But I can still hear sound effects and players on team speak.

XxVehrmaktSGTxX

Sep 2 2009, 05:02

when i try hosting a multiplayer game an error message pops up saying "no entry bin\config.bin/RscDisplayMultiplayerSetup/controls/CA_B_West.sideToggle" please somebody help!!!!!!!!!!!!

Baxalasse

Sep 2 2009, 06:33

when i try hosting a multiplayer game an error message pops up saying "no entry bin\config.bin/RscDisplayMultiplayerSetup/controls/CA_B_West.sideToggle" please somebody help!!!!!!!!!!!!

I also get this all the time i join a server...

Dwarden

Sep 2 2009, 16:29

it's fixed in public betas ... either get it or wait for next patch

XxVehrmaktSGTxX

Sep 2 2009, 19:05

which one is more worth it waiting for the patch or try the public beta?

Steakslim

Sep 3 2009, 14:38

problem with the public beta is that not everyone is using it yet, so you may not find as many servers to play on using the fixes the beta provides. However this does not stop you from playing on regular 1.03 servers as the beta acts as a mod, so you can switch between beta and 1.03 by restarting the game (and removing the target line for the beta, or running a different shortcut that doesn't run the beta). It's really up to you as you loose nothing by downloading the beta other than some of the servers you might like may not be running on it.

Slain

Sep 4 2009, 02:57

My game updated to 1.03 automatically. I've tried reinstalling/deleting cache and verifying but I keep getting 2 annoying errors that won't go away. They are also happening to a friend of mine who purchased this game on Steam.

1) in Razor 2 mission at the beginning where ther is supposed to be talking when the screen is black I get a "Sound Counter not found" error. Other people on steam are getting this too but there is no fix and CD people don't seem to have this problem??

2) EVERY time I join a multiplayer game I get a error:
No entry 'bin\config.bin/RscDisplayMultiplayerSetup/controls/CA_B_West.sideToggle'

Nothing came up when I searched that one but my friend also gets that exact error.

Steakslim

Sep 5 2009, 15:19

Don't worry abot the CA_B_West.sideToggle error, it's harmless and from what I've heard, does not appear anymore with the beta patches so it should be gone when 1.04 rolls around.

As for the Razor 2 mission problem, I cannot comment as I don't play the campaign.

ericodapinco

Sep 15 2009, 17:30

patch 1.04 please... in a 134 MB sized file this time... if possible.

Necto

Sep 15 2009, 20:27

I get Session Lost on every server i enter. And few of my friends too.
As soon as we enter server, ... no addons or anything.

[RIP] Luhgnut

Sep 15 2009, 23:57

I get Session Lost on every server i enter. And few of my friends too.
As soon as we enter server, ... no addons or anything.

Same. Everything comes up as 1.04, can see green light servers. I go to connect and "Session Lost". Instantly.

Slain

Sep 16 2009, 03:10

Luhgnut;1439489']Same. Everything comes up as 1.04, can see green light servers. I go to connect and "Session Lost". Instantly.

I'm getting the same error also. I run no mods. I tired the beta just before this came out and it never had this problem.

It doesn't happen on EVERY server but it happens on just aout every server I play on :/ The servers are upgraded to 1.04 also....

XxVehrmaktSGTxX

Sep 17 2009, 04:40

yeah i dont get the "west.side toggle" error anymore but i still cant host or join a coop game.

Palanoid

Sep 17 2009, 11:26

i have the same "session lost" error too on most 1.04 servers..there are only 2 or 3 servers joinable at the moment

Dwarden

Sep 17 2009, 14:46

please make sure you revalidate cache for receiving post patch hotfix ...
sorry for any troubles

Syntax!

Sep 20 2009, 23:26

Ever since the newest patch (Hotfix included) my keyboard doesn't seem to work in game. I've tried with another, but only the mouse works. I'm using a G15, if it helps.

I posted in here because I have a friend who also owns the steam version and has the same issue.

XxVehrmaktSGTxX

Sep 23 2009, 05:27

please make sure you revalidate cache for receiving post patch hotfix ...
sorry for any troubles

how do i do this?

Bulldogs

Sep 23 2009, 12:50

Go into Steam -> My Games -> (right click) Arma 2 -> Properties -> local files -> verify intergrity of game cache

Shataan

Sep 27 2009, 01:36

Does Steam give us our updates in small doses? Cause I am getting 1 atm and I was sure I have 1.04 already. Oddness.

konkur

Sep 28 2009, 11:12

Hi, I have a quick question about Arma II on Steam.

I've bought the retail version (with Polish localization) in a store, is it also possible to register the bought game to Steam? That could save me the need to constantly put the DVD in whenever I want to play.

Dwarden

Sep 28 2009, 23:50

NO, it's not possible to register retail version to STEAM ...

glimpse79

Oct 2 2009, 05:20

MY system:
OS: Microsoft Windows 7 Ultimate 64bit build 7100.
Ram: 8gig
Video: 2 x GeForce 8800 Ultra 768meg in SLI Nvidia driver 190.62
CPU: AMD Athlon 64 X2 Dual Core Processor 6400+, 3520 Mhz
Motherboard: Asus AMD CROSSHAIR 590SLI v1 with on board sound & network
Hard drives: 3 x WD in a 1.4TB hardware Raid 0

Problem:
Click on arma 2 in steam comes up preparing to lunch then just disapears with no error codes??? Run it from the arma 2 exe and i get the following: "C:\Windows\system32\X3DAudio1_6.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."

The game used to run fine on my machine I had to do a rebuild of the computer and this is what comes up after steam did the last update also same issue with the demo?????

Things I have tried:
-Re installing directX 9 august 2009 as administrator no effect tried a few times!!!
- Re intall of the arma 2 game, waste of a download no change same problem!

PLEASE HELP!!!!!!!!

Dwarden

Oct 3 2009, 07:16

please try install November version of DirectX redist ... and make sure you installing with admin rights

glimpse79

Oct 6 2009, 02:38

I assume you mean the november 2008 directx? I did that and used administrator rights same issue no improvment :( any other idears should I uninstall the august 2009 directx?

Dwarden

Oct 6 2009, 15:58

no i mean August 2009 one from this http://forums.bistudio.com/showthread.php?t=77880 first post ...

sorry lost track what url in first post was where ;)

glimpse79

Oct 7 2009, 04:39

I had all ready tried installing the August 2009 with admin privelges but I did it again still the same error when I run it direct from the exacutable or if I run from steam no error comes up it just disapears. I dont under stand this is a fresh install of windows and I am useing the same drivers as when it worked fine only the update of steam has changed :(

IrishCoffe

Oct 23 2009, 01:31

wrong thread

Newtoma

Oct 24 2009, 01:26

After about 15min. of playing online I get stuck with a "Recieving..." message that never ends. I know it's not the internet connection because I can still communicate with the other players, and the new patch hasn't done jack-squat to fix the problem.

Can you please help me? I've checked all around but can't get an answer from anyone.

Bonko the Sane

Oct 26 2009, 07:35

Been away from the forum for a while, so Hi!
Just bought the game off Steam, everything is working as it should, good fps with all settings High\Very High (except postprocess which is disabled). My only issue is as follows, the game wont remember my Anti Aliasing settings....everytime i start it its back to disabled. I tried app controled, override and the potentiate app setting in Nvidia CP...no result.
Any suggestion? Later on ill edit arma .cfg directly and see if it works.

Q6600 @<hidden>
Driver 191.07
BFG 260 GTX
MSI 975X Platinum
OS Win7 64 Ultimate
4GB RAM

Dwarden

Oct 26 2009, 10:17

do not use forced AA in driver panel at all ! that's why there is ingame engine controlled one

Bono_LV

Oct 26 2009, 12:11

Give v-sync off in-game option. Or shortcut startup parameter.

shamm

Oct 27 2009, 08:29

hi there, i dont know if this problem already occured by someone, but would be fine to get a solution/advice. I've got ArmA2 borrowed from a friend of mine (understand the retailbox one) played it and kept the config/save content. Yesterday i bought my own one from steam, all s ok i can browse the menu and all that crapp but when i try to continue in campain i get CTD with some "arma2 has been generating errors and will be closed blablabla" thing. First i though the last save is corrupted or whatnot so reverted to save before the last one .... and got the same crap .... CTD. So my question is like follows. Its possible that Retail config/saves (since those were saved on lower version of patch - at that time 1.04 wasnt developed yet so it was patched with 1.02) are not backwards compatible with the steam actual 1.04 version?
My PC Specs:
C2Q Q6600
ASUS P5K
4GB RAM
GF260
Win XP Profi SP3
STEAM version of ArmA2

will try to post crashlog later when i get home.
Thanks in advance for any reply

Gabkicks

Nov 4 2009, 18:18

help ASAP, i just went prone in the middle of combat and then i shift/tabbed cus i got am message from a friend, and now ARMA 2 isn't recognizing my keyboard inputs at all. how do i fix this?! I'm still ingame
................
I listened to Dwarden, and found thread here:
http://forums.steampowered.com/forums/showthread.php?t=973715.

Dwarden

Nov 4 2009, 19:10

please forward this to Valve as it's related to theirs ingame overlay ...

Dwarden

Nov 5 2009, 07:54

and Valve released beta update which most likely address this issue so,

please try use latest version of STEAM client (atm in beta)

- Fixed tab key press getting through overlay to game during shift-tab activation for games using win32 input messages

rest of changelog : http://forums.steampowered.com/forums/showthread.php?t=1012269
to install STEAM beta client goto into it's settings and on first page click in beta participation on Change and choose "STEAM Client beta"

bshaolin

Nov 12 2009, 17:15

Hi there!

I got somme troubles with my steam arma 2 version.

On my favourite server i'm being kicked always and alaways. The time i can spend on it is not the same each time but i'm kicked at the end.

I have the dta/bin.pbo error even after updating via steam, but others guys on the server have it too and they are not kicked.

Here is my rpt file, if you guys have any ideas...

Client: Object 2:7603 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7588 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7586 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7588 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7588 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 44:221 (type Type_105) not found.
Client: Object 44:221 (type Type_106) not found.
Client: Object 2:7588 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 44:221 (type Type_105) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7588 (type Type_86) not found.
Client: Object 2:7588 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7603 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7603 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7588 (type Type_86) not found.
Client: Object 2:7588 (type Type_86) not found.
Client: Object 2:7603 (type Type_86) not found.
Client: Object 2:7603 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7603 (type Type_86) not found.
Client: Object 2:7603 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7603 (type Type_86) not found.
Client: Object 2:7588 (type Type_86) not found.
Client: Object 2:7603 (type Type_86) not found.
Client: Object 2:7588 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7583 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7586 (type Type_86) not found.
Client: Object 2:7586 (type Type_86) not found.
Ref to nonnetwork object 15f2f800# 1057815: ural.p3d
Client: Object 2:7583 (type Type_86) not found.
Client: Object 2:7583 (type Type_86) not found.
Creating debriefing

A lot of Client: Object x:xxxx (type Type_86) not found. Too many to put the whole rpt file here btu i have no error expect that...
No pacth, steam version up to date cache is verified....

By advance tx

bshaolin

Nov 13 2009, 18:21

Hi again !

After a few test i can see hundreds and hundreds lines of that ural.p3d in rpt file....
If that can help..

Tx again , i'm being crazy about this...

bshaolin

Nov 13 2009, 22:12

I'm still looking for a solution.... here is some content of rpt file that might help.

Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in HTML file mpmissions\__CUR_MP.Chernarus\R3F\Html\R3F_Info_fr.html
Context 3
Ref to nonnetwork object 1899f800# 1060932: ural.p3d
Ref to nonnetwork object 1899f800# 1060932: ural.p3d
Error in HTML file mpmissions\__CUR_MP.Chernarus\R3F\Html\R3F_Info_fr.html
Context 3

The more i'm reading forums all over the web, the less i'm believing to find an issue....

Dwarden

Nov 14 2009, 18:39

you get this when you use latest public beta version ?
(yes you can use it fine with STEAM version just use the shortcut made by beta installer)

Dwarden

Nov 15 2009, 02:45

bshaolin

Nov 15 2009, 17:46

Yup i get this with both 1.04 and beta patch. I have this on two servers that use c040 dom 1.09 maybe that's this map?[COLOR="Silver"]

here is the rpt file with lastest beta patch :

Client: Object 22:71 (type Type_90) not found.
Client: Object 22:73 (type Type_90) not found.
Client: Object 22:75 (type Type_90) not found.
"############################# co40 Domination #############################"
Client: Object 22:71 (type Type_90) not found.
Client: Object 22:73 (type Type_90) not found.
Client: Object 22:75 (type Type_90) not found.
Performance warning: Very large search for 145931 (>300 m)
Performance warning: Search for 1270f400# 145931: mil_barracks.p3d was very large (300 m)
Performance warning: Very large search for 149873 (>300 m)
Performance warning: Search for 149873: b_sambucus.p3d was very large (840 m)
Performance warning: Very large search for 137736 (>300 m)
Performance warning: Search for 14c8a400# 137736: mil_barracks_i.p3d was very large (300 m)
Performance warning: Very large search for 137663 (>300 m)
Performance warning: Search for 12747400# 137663: mil_barracks.p3d was very large (450 m)
Performance warning: Very large search for 137660 (>300 m)
Performance warning: Search for 14cb7c00# 137660: ss_hangar.p3d was very large (510 m)
Performance warning: Very large search for 137699 (>300 m)
Performance warning: Search for 14cb7400# 137699: misc_waterstation.p3d was very large (510 m)
Performance warning: Very large search for 137665 (>300 m)
Performance warning: Search for 137665: wall_fen1_5_hole.p3d was very large (510 m)
Performance warning: Very large search for 137664 (>300 m)
Performance warning: Search for 14cbbc00# 137664: ind_illuminanttower.p3d was very large (540 m)
Performance warning: Very large search for 137539 (>300 m)
Performance warning: Search for 14cbec00# 137539: ss_hangar.p3d was very large (600 m)
Performance warning: Very large search for 137513 (>300 m)
Performance warning: Search for 12748c00# 137513: ind_garage01.p3d was very large (600 m)
Performance warning: Very large search for 137508 (>300 m)
Performance warning: Search for 14cbd400# 137508: ind_shed_02_main.p3d was very large (600 m)
Performance warning: Very large search for 137510 (>300 m)
Performance warning: Search for 14cbdc00# 137510: ind_shed_02_main.p3d was very large (600 m)
Performance warning: Very large search for 137509 (>300 m)
Performance warning: Search for 14cc0c00# 137509: ind_shed_02_main.p3d was very large (630 m)
Performance warning: Very large search for 137531 (>300 m)
Performance warning: Search for 14cc1400# 137531: ind_shed_02_main.p3d was very large (630 m)
Performance warning: Very large search for 137522 (>300 m)
Performance warning: Search for 14cc0400# 137522: mil_house.p3d was very large (630 m)
Performance warning: Very large search for 136551 (>300 m)
Performance warning: Search for 14cddc00# 136551: shed_m03.p3d was very large (810 m)
Performance warning: Very large search for 136554 (>300 m)
Performance warning: Search for 12741c00# 136554: ind_workshop01_04.p3d was very large (810 m)
Performance warning: Very large search for 136532 (>300 m)
Performance warning: Search for 12741400# 136532: mil_guardhouse.p3d was very large (810 m)
Performance warning: Very large search for 136538 (>300 m)
Performance warning: Search for 136538: wall_fen1_5_hole.p3d was very large (780 m)
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Performance warning: Very large search for 137078 (>300 m)
Performance warning: Search for 14cc5400# 137078: mil_barracks.p3d was very large (660 m)
Performance warning: Very large search for 137080 (>300 m)
Performance warning: Search for 14cc9c00# 137080: hangar_2.p3d was very large (690 m)
Performance warning: Very large search for 137079 (>300 m)
Performance warning: Search for 1272f400# 137079: hangar_2.p3d was very large (690 m)
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Performance warning: Very large search for 143236 (>300 m)
Performance warning: Search for 143236: b_corylus2s.p3d was very large (540 m)
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in expression <gFile >> "cfgPatches") select _i)] call BIS_fnc_arrayPush;
};

if (isServer) th>
Error position: <BIS_fnc_arrayPush;
};

if (isServer) th>
Error Variable indéfinie dans une expression: bis_fnc_arraypush
File mpmissions\__CUR_MP.Chernarus\x_scripts\x_funcs\x_commonfuncs.sqf, line 10
Error in HTML file mpmissions\__CUR_MP.Chernarus\R3F\Html\R3F_Info_fr.html
Context 3
Error in HTML file mpmissions\__CUR_MP.Chernarus\R3F\Html\R3F_Info_fr.html
Context 3
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Client: Object 62:19 (type Type_95) not found.
Client: Object 62:19 (type Type_121) not found.
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Group B 1-2-A (0x2ed7c918) - network ID 2:7250
- no main subgroup
Network simulation, time = 19414.648
Group B 1-2-A (0x2ed7c918) - network ID 2:7250
- no main subgroup
Group B Bravo (0x2ed7c918) - network ID 2:7250
- no main subgroup
Group B Bravo (0x2ed7c918) - network ID 2:7250
- no main subgroup
Group B Bravo (0x2ed7c918) - network ID 2:7250
- no main subgroup
Group B Bravo (0x2ed7c918) - network ID 2:7250
- no main subgroup
Group B Bravo (0x2ed7c918) - network ID 2:7250
- no main subgroup
Group B Bravo (0x2ed7c918) - network ID 2:7250
- no main subgroup
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
delta_2: Getting out while IsMoveOutInProgress
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Ref to nonnetwork object 16b09c00# 1057211: ural.p3d
Creating debriefing

bshaolin

Nov 18 2009, 07:38

no ideas?

DemonFire

Dec 17 2009, 04:43

Hey I've had this game for a while now and I'm looking into mods and addons for ArmA2.

I've read a bunch of posts on how to install addons with steam but haven't been able to understand them... (I'm not that good with computers :confused:)

Can someone post a way to get addons to work with steam? Specifically, how to get the Community Base Addons to work so that I can install other addons. (please be as specific as possible and try to use as much English as possible ;))

bshaolin

Dec 20 2009, 11:40

A month without response that's kind of sad....

It seems that steam version is kicked by all servers that are not regardless to addons and have a strict policy on them.
So what's the solution here? Do not play on serious servers?
That's the first and last time i bought something on steam...
Anyway, here it's biforums so its not the right place to complain, but can i hope any fix from Bi or should i just delete arma from my hard drive? Or at least any response that will not be : be sure you use latest beta....I do and it doesnt change anything....

DemonFire

Dec 21 2009, 19:22

Finally found the answer about installing addons myself (thanks for nothing guys :Oo:)

step by step:

1 Finding where to put everything:

1. First you find your Steam folder
2. Go to Steam\SteamApps\common\arma 2

2 Installing a mod (example)

I'm going to install the STI Stryker Pack (addon) which adds the stryker tank to the game.

1. download the addon at Armaholic.com (http://www.armaholic.com/page.php?id=8386)
2. Now that the mod is downloaded we need to create a folder for it: inside your arma 2 folder create another folder that is called @<hidden> - this folder can be called anything but must have an "@<hidden>" sign at the beginning of its name.
3. Inside that folder create another folder, name it AddOns.
4. Inside that AddOns folder extract all the .pbo files that came with the mod.

3. Launching the addon

Now that the mod is installed, all that is left is to tell the game to launch that mod.

1. Find your desktop shortcut to Arma2.
2. Right click it and select "Properties" from the drop menu.
3. In the properties box select the "shortcut" tab at the top and look for the box called "target".
4. Inside the target box go all the way to the end of the long line of text (DON'T ERASE ANYTHING).
5. At the end of the line type in the following " -mod=@<hidden>". (include the space at the front.)
6. click the apply button at the bottom and close the box.
7. launch the game and enjoy :)

stegman

Dec 22 2009, 20:46

Hi guys, sorry if this was asked and answere else where, i couldnt fin it :(

Where do we stand with Steam purchased ARMA2 and batches?
Does steam download the on its own?
If not how do i install them?

Also, will beta patches work on my copy of Arma2?

Cheers for the info.
Steg

[Edit] never mind!
Just found this link; http://www.arma2.com/supply/all-downloads/file/219-arma2update_105.html?lang=en

SO sorry...!

And this blue text; "This update IS compatible with ALL previous ARMA 2 versions as well as with the STEAM version. "

Dwarden

Dec 22 2009, 23:27

just make sure you disable STEAM autoupdate for ARMA 2 and ARMA 2 dedicated server ...

nuxil

Feb 2 2010, 20:32

FIX / WORKAROUND for the beta failing to install on STEAM build:
use registry editor add registry key into
HKEY_LOCAL_MACHINE\SOFTWARE\Bohemia Interactive Studio\ArmA 2
new String value
name it "MAIN" (w/o "")
then place into it same content like is already in key "path"
(e.g. "C:\Program Files\Steam\SteamApps\Common\ARMA 2" w/p "" again)
that's all and now the installer sees Your STEAM game :)

???

HKEY_LOCAL_MACHINE\SOFTWARE does not have any Bohemia Interactive Studio\ArmA 2 tingy in it.

i find only Bohemia Interactive Studio in HKEY_CURRENT_USER\Software\

any your workaround/fix doesnt seam to work.. :?

edit.

i just looked around in regedit and i noticed that i find a key called Main in

HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Bohemia Interactive Studio\ArmA 2

it has the correct path.

im using xp64 bit.. maybe that why it dosent work ??

Dwarden

Feb 3 2010, 17:22

???

HKEY_LOCAL_MACHINE\SOFTWARE does not have any Bohemia Interactive Studio\ArmA 2 tingy in it.

i find only Bohemia Interactive Studio in HKEY_CURRENT_USER\Software\

any your workaround/fix doesnt seam to work.. :?

edit.

i just looked around in regedit and i noticed that i find a key called Main in

HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Bohemia Interactive Studio\ArmA 2

it has the correct path.

im using xp64 bit.. maybe that why it dosent work ??

erm
http://msdn.microsoft.com/en-us/library/aa384253(VS.85).aspx

in more words

The Wow6432 registry entry indicates that you're running a 64-bit version of Windows.
The OS uses this key to present a separate view of HKEY_LOCAL_MACHINE\SOFTWARE for 32-bit applications that run on a 64-bit version of Windows.
When a 32-bit application queries a value under the HKEY_LOCAL_MACHINE\SOFTWARE\<company>\<product> subkey, the application reads from the HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\<company>\<product> subkey.
The figure below shows the structure under Wow6432Node that 32-bit applications will see.
A "registry reflector" copies certain values between the 32-bit and 64-bit registry views (e.g., mainly for COM registration) and resolves any conflicts using a last-writer-wins approach.

in short - it should be properly redirected auto ...

maturin

Mar 23 2010, 21:06

edit: nvm

beru

Apr 21 2010, 23:21

NO, it's not possible to register retail version to STEAM ...

A bit short of an answer... Why not?

malkekoen

Jul 2 2010, 16:09

I have the CD version of ARMA 2 and just bought the Steam version of OA.
So here we have a new beta, and I can't really make it work with the Steam version. I tried installing the beta, but it doesn't seem to register OA, just the old cd version of ARMA.

There is a folder in the Steam directory under "Expansions" called "beta", but it crashes when I try to launch the .exe situated there.

What is the correct way of beta patching a Steam version?

Dwarden

Jul 2 2010, 16:17

A bit short of an answer... Why not?

because CDkeys STEAM use are theirs own key systsem so You can't register ARMA 2 DVD Key or ARMA 2 OA DVD with STEAM self

NoBrainer

Jul 16 2010, 20:22

Just curios
Was there a Steam update prior to last night?

I had lots of trouble with the _runA2CO.cmd that was totally different and messed up my setup.

Fixed it now, but it was really frustrating because I didn't get any notification from Steam. I have Steam for both ArmA2 and ArmA2:Operation Arrowhead

MJK-Ranger

Jul 16 2010, 21:11

Hi NoBrainer.

Yes.. it was a steam update for some days ago.. and YES.. if screw up your _runA2CO.cmd. Therefor it's a good idea to make a backup of it and name it whatever you want, and use that one to startup ArmA2:CO ;)

EDIT: Jeg har gått på samme smell opptil flere ganger pga Steam update, den sier jo ikke ifra om det er ny update, derfor har jeg laget egen _runA2CO.cmd ;)
Ha forsatt en fin kveld, skååååål :p

NoBrainer

Jul 17 2010, 08:07

ikke dumt forslag det der nei. Takker.

Dwarden

Jul 17 2010, 21:03

yeah you should not overwrite _runA2CO.cmd because if it gets updated your changes are lost ...

make own copy

also since the last one you can use the "set launch options" in game properties within steam

NoBrainer

Jul 20 2010, 07:40

Not tested the beta so I run Steam 1.52. But the other night I had to "force" -cpuCount=4 and -exThreads=7 (i7 860 cpu).
I had multiple crashes when trying to take a weapon out of a weapon crate.
But with the "new" settings it did not crash.

It was no CTD, but A2CO did not respond anymore.

I thought -cpuCount and -exThreads was not necessary with A2CO?

Fox '09

Jul 22 2010, 20:17

only with the newest betas , as oa went gold before exthreads, i think

Jason9811

Jul 23 2010, 05:38

Hey I'm new here, I've tried to run Operation Arrowhead (bought with steam with the ArmA II game) but apparently I get bad serial number used in setup. I can run ArmA II no problem but it's OA that's fine. I have tried the solutions, verified the game cache and also I run as administrator from a shortcut. To no avail I still get the error and I don't know what else I can do. I've contacted steam on it and they told me the same solution which doesn't work for me. I use Windows 7, if anyone can help that would be great.

Edit: I might have also be in the wrong location for this issue *sigh* apologies if it is.

MJK-Ranger

Jul 23 2010, 16:01

Hi and welcome :)

First, you have bought both versions? ArmA2 + ArmA2:OA or just ArmA2: Combined Operation?

L3TUC3

Jul 23 2010, 17:18

Restart Steam. (Rightclick the steam logo in the system tray and select exit, then log in to steam again).

If that doesn't work, reboot.

Fixed it for me.

Jason9811

Jul 23 2010, 19:10

Hi and welcome :)

First, you have bought both versions? ArmA2 + ArmA2:OA or just ArmA2: Combined Operation?

I bought Combined Operations. ArmA II works without any problems, it's just OA that has the bad serial number in setup error. Thanks for the welcome by the way, appreciated :).

Yeah I've tried reboots, restarts everything. It's not seeming to work out.

EDIT: Okay I got the game to work it was a strange problem with steams installing the game. Apparently OA has no "KEY" binary code inside of it. For future reference I made a step guide for anyone else who gets this error and it might just help the situation more. Also 90% of the credit goes to the steam help support. This is easier for Combined Operations.

STEP 1:
First go to START> RUN

STEP 2: Type "regedit" (picture below)
http://img826.imageshack.us/img826/7269/step1a.jpg

STEP 3: Go to HKEY_LOCAL_MACHINE and look for the folder called "wow6432node" (Picture Below)
http://img832.imageshack.us/img832/8136/step2t.jpg

STEP 4: Click "wow6432node" and locate the folder "Bohemia Interactive Studio" there you will see the ArmA folders. (PLEASE VIEW Picture Below)
http://img153.imageshack.us/img153/4053/step3k.jpg

Step 5: After viewing the picture above you'll need to edit the binary of the key to do so view the picture below (MAKE SURE YOU SELECT ALL or whatever you can select THE BINARY INSIDE OF IT! EVEN THE GIBBERISH!)
http://img265.imageshack.us/img265/9475/step4xz.jpg

Afterwords load Operation Arrowhead and it should load for you. That's the best I can do after stumbling on the problem, I was able to get into multiplayer no problem too. Cheers and hope it works for the rest of you. If you have just the expansion OR the original you'd have to work on the binary yourself or ask the company to provide you (with the appropriate key) the binary for it.

Now before I get people complaining about this, this way was for some reason the ONLY way I could have had it worked. I've reinstalled everything (wasting bandwidth as well) yet for some reason it would not produce the KEY. I have bought these games and STEAM wouldn't make the key even with the verifying cache and administration mode. Either way I can play now.

vonfonculo

Sep 15 2010, 03:54

I am having some major graphics issues, I am getting gray boxes from the lowest graphics setting to the highest graphics setting. I have read a number of these threads, and I am running Steam beta, I have tried to change the end of the file name, I have tried to run in windowed mode. I have the same problem with ARMA 2 and ARMA 2 operation arrowhead.
OS Windows 7 64 bit
Processor Intel(R) Core(TM) i5 CPU M 430 @<hidden> 2.27GHz, 2267 Mhz, 2 Core(s), 4 Logical Processor(s)
4GB RAM
Intel(R) Graphics Media Accelerator HD 1.68 G RAM

My computer is all of 4 months old and I can run Battlefield 2 on the highest graphics settings without a problem.

L3TUC3

Sep 15 2010, 07:54

Intel(R) Graphics Media Accelerator HD 1.68 G RAM
.

There's your problem. I don't think BI supports intel gpu's.

tertim

Sep 24 2010, 21:18

intel core 870@<hidden>
8gig
ninvidia ge gtx 480gaming graphics 4095gb
500 gig hd
win7 64 bit

I have went thru all fixes listed with neg results including
below

A staff member has replied to your question:

Hello Tim, If it still does not work, please try deleting your ArmA 2 expansion entries: Go to the "Start" menu, select "Run", type "regedit" and click "OK". Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Bohemia Interactive Studio\ Note: In 64-bit operating systems, this path may begin as: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ Right-click on the entry "ArmA 2 OA" and select "Delete". The entry may appear as a folder. Exit regedit. Load Steam using the following instructions: -If you are running in Windows Vista or Windows 7, please completely exit Steam, and right-click on the shortcut which you use to launch Steam and select "Run as Administrator." -If you are running in Windows XP, take the following steps: 1) Exit Steam. 2) Go to the "Start" menu, select "Run", type "regedit" and click "OK". 3) Navigate to the following registry key: HKEY_CURRENT_USER\SOFTWARE\VALVE 4) Right click and select "Permissions" 5) Check the boxes for "Admin" and "System" to "Full control" and "Read". From the Library list, right-click on "ArmA 2" and select "Properties" from the menu. Select the "Local files" tab and click the "Verify integrity of game cache..." button. Steam will verify the game cache files (GCF's) - this process may take several minutes. Once the process is completed, the "Check" window will automatically exit. Do the same for "ArmA 2 Operation Arrowhead". You should now be able to launch your game. If you continue to have difficulty, further technical support for this title is handled by a third party support department - please follow the link below for instructions to contact the support provider for this title: Title: ArmA II series Link: http://support.steampowered.com/kb_article.php?ref=7614-RUPL-1145 Please let us know if you encounter any difficulty contacting the support provider for this title, or if you have any further questions.

I am at a loss as to what to do any help would be appreciated

RoME

Nov 30 2010, 13:41

I don't really get it about patch install. I have arma:CO from Steam.

Do i need to install latest pacth for Arma 2 AND OA? or is it a CO patch that includes both?

please help....

Strikor

Nov 30 2010, 17:21

Just run the latest beta installer and it will make an icon on your desktop.

hazzamck

Dec 4 2010, 10:05

i just bought arma 1 from steam and i keep getting the message file too short addons/character.pbo after a check box appers gets to the point with 2 more check boxs and stops

Dwarden

Dec 10 2010, 02:19

New STEAMclient beta changelog from 9.12.2010

- Fixed starting game executables with very long command line parameters (>255 characters)

this is very important fix for STEAM users of all ARMA serie games

makes way easier to run any mods at any path via commandline :)

NoBrainer

Dec 17 2010, 17:19

if you start CO from Steam, will it still take all the "set launch options" with it?

Dwarden

Dec 18 2010, 04:21

the A2:CO option in STEAM is not for beta version, You need create new batch file for the beta with proper mod entries to run in A2: CO mode

NoBrainer

Dec 18 2010, 11:29

Thanks.
You cleared it up for me

softsol12

Jan 17 2011, 15:41

Hi I Downloaded Arma 2 / Arrowhead from Steam and I noticed that the noise of the aircrafts is not the same as it was with my Arma2 hardcopy install, it is much more quieter and you cannot see the red hot heat coming from the Figheter Jets pipes anymore. Steam suggested the below:

Hello Sacha, Please try the following: Exit Steam entirely. Browse to your Steam installation (Usually C:\Program Files\Steam\) Rename the "steamapps" folder to "old_steamapps" Re-launch Steam and re-install the game. Once the installation is complete, test the issue. If the issue is not resolved, you can rename the folder back to avoid having to re-install other games

However the game is telling me i do not have permission to change the name etc. What can I do to get back the orginal sounds of all aircrafts? Thanks

Arrowhead

Jun 20 2011, 04:00

I can't install the beta patch on my Steam version. It says it needs 1.58 and I have 1.57. I run the game, and it clearly says I have 1.59... :confused:

I verified the cache, and it says 1 file failed and will be downloaded. But it never does, and verifying the cache always fails. Ugh...

P.S. I recently migrated my Arma 2 and OA files from my old rig to this new one. Don't want to have to redownload everything again.

MadDogX

Jun 20 2011, 12:56

P.S. I recently migrated my Arma 2 and OA files from my old rig to this new one. Don't want to have to redownload everything again.
What method did you use to migrate the data?

Arrowhead

Jun 20 2011, 18:21

What method did you use to migrate the data?

I put my old harddrive in this computer and compied all of the arma files to my new Steam directory. I then instructed Steam to install/download Arma 2/OA, but the download process went very quickly as expected as Steam realized most of the needed files were already there. I verified the cache many times and it reports that one file failed and will be redownloaded. But only a 1.4kb download is made at that point and reverifying the cache again yields another fail and another 1.4kb download.

Other than all of this, Arma 2/OA seems to run fine and the version is reported as being 1.59 in-game. I just can't install the beta patch for some reason.

EDIT: Oh and another interesting thing. If Steam is running when I try to apply the beta patch, I get a different error saying "wrong cd-key".

Focher

Jul 3 2011, 07:17

I verified the cache many times and it reports that one file failed and will be redownloaded. But only a 1.4kb download is made at that point and reverifying the cache again yields another fail and another 1.4kb download.

I also see this behavior across multiple systems and with both Arma 2 and OA, as does a friend. Perhaps Steam has corruption in its Arma 2 and OA files?

thinkr

Dec 26 2011, 01:07

Resolved!
Weird TRIED IT AGAIN AFTER LOADING MY OTHER MODS AN NOW ARMA2 APPEARS... n/m thx

Qazdar

Dec 26 2011, 13:40

My .rpt is not showing what allocator i'm using ...

Dwarden

Dec 26 2011, 14:21

v1.60 Using Combined Ops Launcher in Steam the game does not recognize ARMA2 as loaded mod in game!

Using the Steam Combined Ops launcher broken?... Operation arrow head No longer recognizes ARMA2 as loaded modifier. I have verified this with a friend. plz help.

Weird TRIED IT AGAIN AFTER LOADING MY OTHER MODS AN NOW ARMA2 APPEARS Testing again... brb

i assume You forgot run ARMA 2 once to get detected ...
until You do that it will not become detectable (1st run = registry keys written)

---------- Post added at 16:21 ---------- Previous post was at 16:20 ----------

My .rpt is not showing what allocator i'm using ...

what game, what build, what distribution (i assume STEAM)?

do you have \Operation Arrowhead\dll\ folder?

rory_pamphilon

Jun 7 2012, 19:49

the A2:CO option in STEAM is not for beta version, You need create new batch file for the beta with proper mod entries to run in A2: CO mode

Is there an example of this batch file anywhere? im looking to give the betas a try with Day Z and nearly all server are running beta now so cant get on them with standard version.

Running Arma 2 CO on Steam with Baf & PLC.

Have installed 93415.

When I fire up Arma 2 beta using the supplied shortcut arma 2 isnt loaded and i get kicked from games for not having cherno installed.

Thanks

MMrrTT

Oct 30 2012, 17:02

Hello.
I've upgraded to Windows 8 and installed Steam. All games, settings and previous Steam directory was saved before. Now I've checked hash for Arma 2, Arma 2: OA and Arma 2: PMC. I try to install the latest beta patch in order toplay DayZ, but I receive an error about wrong CD-key. I still can see my key in Steam, but it seems it doesn't write it to register. How can I fix it and install beta patch?

MadDogX

Oct 30 2012, 18:00