View Full Version : ArmA Custom Faces For Free
Hi, there you've two Custom Faces Templates for create you're own
or to check how i did it and then do it yourself too. I made 'em
using the Photoshop CS II 9.0.2 but i belive that they work with
the Photoshop 6.0.
-=Charles Wipman's Custom Face Template I (at OFPEC.com)=- (http://www.ofpec.com/ed_depot/index.php?action=details&id=618)
-=Charles Wipman's Custom Face Template II (at OFPEC.com)=- (http://www.ofpec.com/ed_depot/index.php?action=details&id=619)
http://img.photobucket.com/albums/v330/wipman/incomming.jpg
1St Template:
- Details
- Eyes
- Tattoos
- Hair Cuts
- Half Mask
- Sleeves
- Gloves
- Wireframe
2Nd Template:
- Sleeves
- Gloves
- Wireframe
- Eyes
- Haircuts/Hair colours
Enjoy it, let's C ya
Helping_Hand
Jan 3 2007, 21:09
http://img363.imageshack.us/img363/8076/hhfaceslf1.jpg (http://img399.imageshack.us/img399/6083/hhfacekk9.jpg)
Mine
Regards HH http://forums.bistudio.com/oldsmileys/smile_o.gif
wipman +1WL for a pic above 100kb. That's your 5th WL. As it "only" was a pic you're not perm banned but you're 30 days post restricted.
inveigle
Jan 4 2007, 05:26
This is a great idea. Use http://imageshack.us/ for a host, it's easy, no need to register and free. Be sure as to use the "thumbnail 1" option after you upload it so as not to incure the wrath of the admins.
Here is my submission. Going back to my Ghost Recon Days.
http://img475.imageshack.us/img475/6724/facerq5.th.jpg (http://img475.imageshack.us/my.php?image=facerq5.jpg)
Soul Catcher
Jan 4 2007, 10:31
i like the idea guys http://forums.bistudio.com/oldsmileys/smile_o.gif but would it be easier to just put all the faces into an addon as a facepack and have these faces selectable form the main menu (profile\edit) ?
i have done this with the custom faces i've got, that way if you felt the urge to you could then apply the faces to AI units (as many as u want) at the same time as using your own. I haven't seen any facepacks for ArmA yet and there were quite a few for good old OFP quite early on.
Shadow NX
Jan 5 2007, 09:47
Thats maybe a very stupid question but...erm... how do i use the custom faces http://forums.bistudio.com/oldsmileys/whistle.gif
The old OFP way didnt work for me i put the edited arma texture in the player folder in jpg format and it doesnt show up in ArmA.
What the heck is wrong, havent found info on this in the manual and noone i asked knew this...
Sniperwolf572
Jan 5 2007, 09:52
There is an folder in your "My Documents" where you can put your custom face in your profile folder. I have altered the location of that folder to be in the root folder of ArmA with the -profile switch. So now my ArmA shortcut looks like this:
<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">H:\Games\ArmedAssault\ARMA.EXE -nosplash -profiles=H:\Games\ArmedAssault\Users[/QUOTE]
and my face location is:
Quote[/b] ]H:\Games\ArmedAssault\Users\Sniperwolf572\face.jpg
Hope it helps.
Would anyone know why when I create a custom face it’s pale?
I’ve used the default face as a base so the skin colour is the same.
http://forums.bistudio.com/oldsmileys/confused_o.gif
Would anyone know why when I create a custom face it’s pale?
I’ve used the default face as a base so the skin colour is the same.
http://forums.bistudio.com/oldsmileys/confused_o.gif
You have an ATI graphics card, right? That's a known bug. http://forums.bistudio.com/oldsmileys/sad_o.gif
Johannes
Jan 5 2007, 16:40
Would anyone know why when I create a custom face it’s pale?
I’ve used the default face as a base so the skin colour is the same.
http://forums.bistudio.com/oldsmileys/confused_o.gif
convert it too .paa and put it back into the folder where the face.jpg should be. The .paa should be called face.paa.
This way worked for me.
Would anyone know why when I create a custom face it’s pale?
I’ve used the default face as a base so the skin colour is the same.
http://forums.bistudio.com/oldsmileys/confused_o.gif
You have an ATI graphics card, right? That's a known bug. http://forums.bistudio.com/oldsmileys/sad_o.gif
Ahhh thats why my face looked so funny ingame.... at first i thought maybe i was just too white. http://forums.bistudio.com/oldsmileys/biggrin_o.gif
Shadow NX
Jan 5 2007, 21:32
bah... i just named it wrong... face.jpg... right... and i somehow was thinking it was named custom.jpg back then... how embarassing http://forums.bistudio.com/oldsmileys/goodnight.gif
This works (as far as I can tell) but the file size increases using TexView.
84.0 KB = 684 KB
Is there any other program (besides PAATool) which converts jpg to paa? http://forums.bistudio.com/oldsmileys/crazy_o.gif
Mr Reality
Jan 6 2007, 04:13
Is it possible to use a custom face in the demo version as i've placed my face.jpg in My documents/ArmA Demo, the custom face option is present, and i can see it fine, but when i enter a MP session my face and arms are white. I just wanted to be able to create my user face before i get the full game in february.
Is it possible to use a custom face in the demo version as i've placed my face.jpg in My documents/ArmA Demo, the custom face option is present, and i can see it fine, but when i enter a MP session my face and arms are white. I just wanted to be able to create my user face before i get the full game in february.
It's because the image is over 100kb. http://forums.bistudio.com/oldsmileys/confused_o.gif
Mr Reality
Jan 6 2007, 04:25
Doh!!!
I should of remembered that. I just proves i don't play much MP..Thanks for the quick reply Talyn, it's much appreciated. It works fine now http://forums.bistudio.com/oldsmileys/biggrin_o.gif
Hi, i've putted all the 19 woodland camoed faces in a .rar file that
has been released at: www.armedassault.eu (http://www.armedassault.eu/news.php) i'll like to do a stand alone addon, a faces pack... with those faces and with one more face that i should do; but the problem is that i don't know and no one that i know, knows how to do a working config for the ArmA that makes the faces work, any help on this field will be very apreciated.
I hope that you like those custom faces. Let's C ya
Hi, this an example of one of those faces that aren't included into
the .rar file that can be found there; keep in mind that it isn't that
noticeable the face tattos when you're a GI (aka General Infantry)
but i hope that you like it anyways.
Punk's Not Dead:
http://img.photobucket.com/albums/v330/wipman/punkarma.jpg
Let's C ya
Black Dragon
Feb 9 2007, 06:44
Great stuff from you wipman =)
I need a Bruce Willis Customface can anyone made it? And how do i install the face because i have two playerprofiles.
Hi, to use the custom faces Black Dragon, just rename the face that you like to: "face.jpg". Now copy it to your: "C:\Documents and Settings\"USER"\My documents\ArmA Other Profiles\"Player Name". Folder; if you have various profiles... just copy it inside each one.
About the Bruce Willys face... sorry, i fear that the ArmA face texture is too big as for transform the OFP face versions that we had. So sorry, but i don't gonna do it, but sure that some other much better texturer than me will do; just be patient... it'll get some day. Let's C ya
olemissrebel
Feb 9 2007, 16:05
Wipman, GI means "Galvanized Iron",
http://en.wikipedia.org/wiki/GI_%28term%29
not general infantry anyways, nice idea?
Hi, Olemiss, i readed into a Nam slang page that the Marines called the army guys: GI = General Infantry. So i thought that it will still being used this days. Sorry to every one if i told you something that's 100% wrong. Let's C ya
Hi, i've made another camoed face, i made it with metalic eyes, i think that may be pimp... and once in game, it don't looks so bad i think; judge for yourself.
In Game:
http://img.photobucket.com/albums/v330/wipman/nuface.jpg
Let's C ya
Black Dragon
Feb 10 2007, 11:40
Thx wipman for your answer.
Hi, i've made another fully camoed head; this time for substitute that dead insurgent face, as "special feature" this one have a nice pair of red eyes with a vertical pupile and a pair of bad looking gloves. But they seem to fit with the face camo surpringly; i hope that you like it anyways.
In Game:
http://img.photobucket.com/albums/v330/wipman/othernu.jpg
Let's C ya
Niiiice. Ill be sure to put my face on here for peeps to see ad edit themselves when I finaly get ArmA and the upgrades for my PC http://forums.bistudio.com/oldsmileys/tounge2.gif
Oh man, Nice mod! Niiice mod! *backs away from Raedor*
Ok guys, stand down, he's not gunna ban wipman *Puts down booklet on how to rebel against and defeat higher factions for banning very good people*
In fact Ill try my hand at editing one now, would someone try it in-game for me?
Hi, thanks for those possitive comments; but you could try the faces with the ArmA MP Demo 1.03, that's all what i have until now, and that & there's the only only that i have for try all the camoed faces that i did; sadly... in the demo there's no other models than the basic GI's (General Infatry in the Nam times) and no units with jungle hats or berets. So i could just check the face front and sides shape in game. But with the demo i made some practice of my shooting skills while i cursed alot about the weapons inaccuracy; that in the MP demo... a blind with a rock have more chances of hit you at 20m in the head and remove you an eye... than you of hit on target with a M4A1 at 100m in burst fire mode. Let's hope that that changes from here to the 16th of this month.
But any way... i could try your face in the demo if you don't have a way of do it. Let's C ya
Hi, i've made by request a Scotish flag painted face, im also thinking in do the antipatriotic fact of do also for request, a face
with the france flag; but... ppfff.. well, the scotish flag:
http://img.photobucket.com/albums/v330/wipman/scotish.jpg
I hope that you like it. Let's C ya
Hi, i did the painted french flag face on request; i hope that you like it.
The Face:
http://img.photobucket.com/albums/v330/wipman/damn_gabacho.jpg
Let's C ya
ok bumping up an old topic
here is Specialist PuMA in action:
[mg]http://i98.photobucket.com/albums/l265/Puma_010/kuva.jpg[/img]
let's see ur's
Hi, don't looks bad, i wonder what we should do to a so great glasses
addon as the OFP version but for the ArmA... that'll be great, i miss
my dear Evaney blue sun glasses... ; but anyway, i've made another
camoed face that i've released in Armed Assault.eu (http://www.armedassault.eu) that i
think that may like to some one; this is how it looks like:
In game:
http://img.photobucket.com/albums/v330/wipman/lastone.jpg
Let's C ya
Wip - they look good mate - but have you thought of doign a pack where the cam cream is more random and messy...
http://www.hawkmoor.com/images/tropical_cam.jpg
There was only one guy when I was in the reserves who took great care with makign distinct large shapes and lines, and we thought he was a tosser http://forums.bistudio.com/oldsmileys/rofl.gif
99% of us just had to do the 10 second, one finger in each of the 3 colours and just smear...my avatar from VBS is a good example! http://forums.bistudio.com/oldsmileys/pistols.gif
Hi, yes stewy; i though in do some in that way, but i preffer 'em in
this way; as it's a game... it don't really matters how it looks like
while it works better than the naked skin, at least i don't really give
that much about it. Let's C ya
[21stSAS] Major
May 8 2007, 08:22
hey whipman, love your Skull Camo Face with Grey covered arms and green no-finger gloves.
http://i100.photobucket.com/albums/m28/Vexx560/SkullCamo.jpg
Could u possibly do one with them arms. But with a balaclava which goes across the eyes and nose in a strip, similar colour to the gloves? If u dont know wat i mean then just say so and ill try to find a pic, ty http://forums.bistudio.com/oldsmileys/biggrin_o.gif
well, i was happy to hear that we poor ATI users could convert the .jpg to .paa, and it works wonders (I used texview for the job).
The big however is that the .paa takes up about six times more space than the .jpg, making it somewhat impractical for MP use. Any solution to this problem?
ATI just keep screwing me over, and I keep getting new ATI cards...
Hi, yes Major, i think that i could, but with the head model mapping
is hard to make the full painted faces match in some points, without
the right tools where look how the textures go into the model, that's
also what keep me away until now from work into camoed weapons.
I could try to do what you want, black bloves & a green wool balaclava
is what you want? or those green wool gloves & the balaclava?.
Keep looking at Armed Assault.eu (http://www.armedassault.eu/forum/viewthread.php?forum_id=14&thread_id=967&rowstart=0) for more custom faces for free. Let's C ya
Hi, well Hund, there's no solution for that damn problem that i know,
but it certainly sounds really bad. Let's C ya
Well if you're doing requests I'd like to put one in there:
Full beard and flourecent green eyes. Simple, but it gets the job done nicely when it comes to in-game recognition.
So far I've been using face8.jpg from the armafacepack V1 as my base.
EDIT: Wait, it won't help, apparantly it's any custom file that's imported which turns pale, not just ones I've actually fondled personally. Another brain-fart, courtesy of the Hundster.
Hey Wip - just a question mate - I love your tatty torn wool jumper as an undershirt for the ACU guys who roll up their sleeves - but the tex don't line up on the top of the wrist that you see in FPS mode - have you got this to work mate?
Do you have any tex done of the new US Army grey undershirt?
Cheers mate
Stew
[21stSAS] Major
May 8 2007, 11:56
ello, ty for getting back to me on this. Yea a Green wool balaclava which reveals only the eyes in a strip with them green gloves and grey torn arms would be great (i have a balaclava face which is black but with the nose showing, looks kinda dumb, and has no gloves, heres a pic) http://i100.photobucket.com/albums/m28/Vexx560/untitled.jpg
same arms as this but with green balaclava which covers the nose would be great ty http://i100.photobucket.com/albums/m28/Vexx560/SkullCamo.jpg
Also, is there anyway u can make it so its an addon and not a custom face? that way i can use it on all servers like the Swiss Face Pack
Hi, if you give me some time, i think that i can do your requests; but
just give me some time. But Stewy, keep in mind that im more with
the Marines than "with those" of the army; and that my english is
not perfect, as your english isn't too. But'll try to do what you've asken
me to do too, just give me some time. Let's C ya
I thought my English was pretty good http://forums.bistudio.com/oldsmileys/sad_o.gif Oh well... http://forums.bistudio.com/oldsmileys/smile_o.gif
Yes, any military style undershirt would be cool - the Marines use a light brown type colour don't they?
Thanks mate
Stew
[21stSAS] Major
May 9 2007, 08:02
Hi, if you give me some time, i think that i can do your requests; but
just give me some time. But Stewy, keep in mind that im more with
the Marines than "with those" of the army; and that my english is
not perfect, as your english isn't too. But'll try to do what you've asken
me to do too, just give me some time. Let's C ya
Yea whipman thanks. Im in no rush, appreciate it mate http://forums.bistudio.com/oldsmileys/wink_o.gif
HDlaeppli
May 9 2007, 11:18
Hi ALL
I have made a Camoface-Pack, its a part of the SWM-V.1.0,
you can download it as standalone Addon. 36 different faces
for single and multiplayer. readme inside.
download camofacepack (http://www.switzerland-mod.ch/index.php?section=media1&act=download&path=/media/archive1/Addons/&file=SWM_CamoFacePack_V.1.0.zip)
have Fun http://forums.bistudio.com/oldsmileys/smile_o.gif
REGARDS
HD_Leappli
Hi, one version completed, the sweater this time don't looks that
good; for for the ACU units serves.
The Face:
http://img.photobucket.com/albums/v330/wipman/Pasamontaas.jpg
Let's C ya
Hi, 2Nd version; with a (even more) grey whatever over the arms.
The Face:
http://img.photobucket.com/albums/v330/wipman/Pasamontaas_01.jpg
Let's C ya
[21stSAS] Major
May 9 2007, 15:54
fuckin awsome m8, ty for doin that 4 me http://forums.bistudio.com/oldsmileys/notworthy.gif
The last version of this ones; kinda camoed and without sweater,
gloves and runway. Don't look's that bad in my opinion.
The Face:
http://img.photobucket.com/albums/v330/wipman/Pasamontaas_02.jpg
In Game:
http://img.photobucket.com/albums/v330/wipman/ingameshape.jpg
I hope that you like 'em. Let's C ya
a bit too shiny green in my opinion, but besides from that, it looks "neat" ;-)
[21stSAS] Major
May 9 2007, 16:34
great, could u possibly do me one more version of that one at the top of this page (dark green wiv eyes showing) but can the eyes be done in a strip instead of two seperate ones and could u possibly have the arms in torn grey shirt like the other one you did? would be great. and also, i noticed that on the one you did earlier the fingers dont seem to join up where they poke out of the gloves, just a minor thing there http://forums.bistudio.com/oldsmileys/smile_o.gif
Hi, i know that about the gloves, Major; but if my own custom face
have it... the others custom faces will have it too. That's something
that i don't gonna correct until the proper 3D tools be released.
Is this what you was asking for?:
The Face:
http://img.photobucket.com/albums/v330/wipman/ibegintobetired.jpg
In Game:
http://img.photobucket.com/albums/v330/wipman/ibegintobetiredofthegame.jpg
I hope that it be, look at the face name and you'll know why; but
i hope that you like it, anyways. Let's C ya
[21stSAS] Major
May 9 2007, 18:07
yea m8 ty
goodguyswearblack9
May 9 2007, 21:58
Where do you get a face template at?
Helping_Hand
May 9 2007, 22:05
Here (http://)
Regards HH http://forums.bistudio.com/oldsmileys/smile_o.gif
Hi, i took the "templates" in the Characters.pbo of the game, i just
extracted the ArmA faces .paa files using the winPbo, the only OFP
tool that half works with the ArmA files that i keep from my thief
days in the OFP. The winPbo 1.1 by ORCS or by some other real
addon makers team. And by the way... another damn custom face
for the LSD lovers out there.
A new Face:
http://img.photobucket.com/albums/v330/wipman/playingwitheffects.jpg
Let's C ya
[21stSAS] Major
May 10 2007, 06:29
keep em comin wipman! (note, i spelt your name correctly this time http://forums.bistudio.com/oldsmileys/yay.gif )
Also, how do u get all the textures to line up correctly (like on the nose for example) do you have a template that you use or sumthing?
Also, is there a way to get it so your AI can wear custom faces in MP and SP matches?
Also, could u possibly do sum of them balaclavas in a few darker colours? perhaps black or dark blue? im trying to work out what will look best on me clan membas http://forums.bistudio.com/oldsmileys/smile_o.gif
Hi, i begin with a base, then i select the nose edge (nose on the
right of the texture) i move the selection over the nose (in the center
of the face) and resize it to match the scale, then i cut that area,
i move it to over the nose (at the right) and then i align it and
i resize it to match the size of it. I've some opened .paa's converted
into .tga to work with 'em. As im unable of use the custom class
name that i want, into a config; i didn't any faces pack, but you
could use your own custom face in the AI's by writing this in they're
Init Box: "this setface "custom";". For use other faces... i guess
that if you copy the face texture that you want, with any name,
into the mission folder and you recall it using the same method,
it may work.
I could do some more black or dark blue (damn cop "style") pasamontañas
i guess; but let me rest. I still have to do a good number of N2003
paintjobs. And when didn't ya said right my name...!? i should read
better... damn dislexia...!! but hey... i could be pressident in the
EEUU, with dislexia, beeing alcoholic... and a coke addict. "God
bless the land of the freedom". Let's C ya
[21stSAS] Major
May 10 2007, 14:57
lol ok m8, ty for all the work you've done fer me http://forums.bistudio.com/oldsmileys/notworthy.gif
Hi, i've made another camoed face, i made it with metalic eyes, i think that may be pimp... and once in game, it don't looks so bad i think; judge for yourself.
In Game:
http://img.photobucket.com/albums/v330/wipman/nuface.jpg
Let's C ya
Could I get this without the metallic eyes?
monty67t
May 11 2007, 04:10
Could someone please post some plain faces here so we (I) can have something to work from? I appreciate it. Also, if someone could try to put these gloves on a skin, that would be awesome. These are a couple of kinds of gloves I seen special forces and other soldiers in Iraq wearing.
http://www.diamondbacktactical.com/images/prodimages/OK-CQB%20OakleyPilotsGloves.jpg
http://www.polimil.co.uk/acatalog/Oakleyglove3.jpg
http://garage.mechanix.com/Images/products/xlarge/orig_c.jpg
Thanks,
Monty
And, and someone got the tex for the pilots gloves?
[21stSAS] Major
May 11 2007, 16:55
Could someone please post some plain faces here so we (I) can have something to work from? I appreciate it. Also, if someone could try to put these gloves on a skin, that would be awesome. These are a couple of kinds of gloves I seen special forces and other soldiers in Iraq wearing.
[/img]http://www.diamondbacktactical.com/images/prodimages/OK-CQB%20OakleyPilotsGloves.jpg[/img]
[/img]http://www.polimil.co.uk/acatalog/Oakleyglove3.jpg[/img]
[/img]http://garage.mechanix.com/Images/products/xlarge/orig_c.jpg[/img]
Thanks,
Monty
but...they're bike gloves, and anyway u wont be able to get the lumby knucles it would just be a sort of picture on the hand if u know what i mean
Helping_Hand
May 11 2007, 18:29
<OT> Your signature image is way to big i'd edit it before a mod does and replaces it with the "bunny". </OT>
Wipman you got any ideas for non balaclava'd faces?
[21stSAS] Major Please don't quote pics. And your Sig pic exceeds the forum height.
monty67t
May 11 2007, 22:37
Major @<hidden> May 11 2007,09:55)]
Could someone please post some plain faces here so we (I) can have something to work from? I appreciate it. Also, if someone could try to put these gloves on a skin, that would be awesome. These are a couple of kinds of gloves I seen special forces and other soldiers in Iraq wearing.
[/img]http://www.diamondbacktactical.com/images/prodimages/OK-CQB%20OakleyPilotsGloves.jpg[/img]
[/img]http://www.polimil.co.uk/acatalog/Oakleyglove3.jpg[/img]
[/img]http://garage.mechanix.com/Images/products/xlarge/orig_c.jpg[/img]
Thanks,
Monty
but...they're bike gloves, and anyway u wont be able to get the lumby knucles it would just be a sort of picture on the hand if u know what i mean
Sorry, they are not bike gloves. The last ones are exactly what they say on them, mechanic gloves. The Oakley gloves are assault gloves. You can find more information on them here -> OAKLEY GLOVES (http://www.trgear.com/osc/eshop/product_info.php/products_id/36)
Monty
[21stSAS] Major
May 12 2007, 07:57
ok ok, sorry i didnt know there was a limit. Ive resized it, is that ok?
Hi, another damn face, this time with blue (damn cop) wool gloves,
if i have to use a blue... i think that will be that tone.
The Face:
http://img.photobucket.com/albums/v330/wipman/drywood.jpg
I hope that you like it. Let's C ya
[21stSAS] Major
May 14 2007, 06:31
yea that colour blue should look great as a balaclava, btw wats this face suppost to be? some kind of rock monster? lol or just some more camo
when i do custom faces, I always have to make it a lot paler than default because the default look like native americans. lol.
Hi, another custom face, a damn cop or a terrorist; that's a user
thing, blue gloves, pasamontañas and sweater. That dry land face
was just a try; the painted face and covered/painted arms don't
really offer cover as they do in the real life, so it's just like the rest
of the ArmA features; they look good but nothing works/feels the same
than in the real life. Is only to look good.
The Face:
http://img.photobucket.com/albums/v330/wipman/damn_cop.jpg
Let's C ya
[21stSAS] Major
May 14 2007, 15:32
n1 m8 spot on http://forums.bistudio.com/oldsmileys/biggrin_o.gif
[21stSAS] Major
May 15 2007, 16:04
i love your balaclavas because i can just use paint (lol i know) to make different versions (no mouth, no nose hole etc) that way i have many different versions of the balaclavas. and btw wipman, ive only ever seen u ingame once where'd u hang man??
Hi, well Major... im glad to know that you can do yourself the custom
faces that you want using those ones as base layer; that removes
work from my hands.
I don't use to play to ArmA, it sucks so much and consumes so much
resources of my PC and runs so bad and lags so much when i step
in a city... that i just don't touch it. Some times i play in MP, some
coops; but as in the public servers there're only the same large coop
missions, i found it boring. Ain't choose any specific server, just the
one that gives me better ping and that allows custom faces, so i
can play as i want; with my own custom face. But keep trying, we
could meet some day in MP in some damn server, who knows...
Let's C ya
Hi, even when im really dissapointed with the game and i feel myself
robbed by BIS, i still like to do things for other people (even if they
don't have... well... even if they aren't girls) like custom faces or any
other texture; like this damn custom faces; like this one:
The Face:
http://img.photobucket.com/albums/v330/wipman/stoned.jpg
Hope that you like it. Let's C ya
Hi, two new faces for the other punks out there.
Dead Kennedys (with Jello Biafra):
http://img.photobucket.com/albums/v330/wipman/PunksNotDead.jpg
Alternative Tentacles (With Jello Biafra):
http://img.photobucket.com/albums/v330/wipman/PunksNotDead_01.jpg
Let's C ya
Chipper
May 16 2007, 02:56
hay i know you guys have beend dieng to pla as me well here you go
DOWNLOWD THIS FACE TO PLA AS CHIPPER
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://img176.imageshack.us/img176/4620/armafacejv6.th.jpg (http://img176.imageshack.us/my.php?image=armafacejv6.jpg)
^^^^^^^^^^^^^^^
My God..the photorealism is STUNNING! http://forums.bistudio.com/oldsmileys/wow_o.gif
Can I see an in-game shot plz before I download.
Thanks much very.
Abs
Chipper
May 16 2007, 03:22
In-game screenshots as you requested please dont hesitant to try it, screenshots dont do it justice.
[IMG]http://img525.imageshack.us/img525....MG] (http://img525.imageshack.us/my.php?image=arma20070515231559rd1.png)
[IMG]http://img248.imageshack.us/img248....MG] (http://img248.imageshack.us/my.php?image=arma20070515231231kq1.png)
http://www.suckysuckylongtime.com/pics/armafacejv6.jpg
Let's C Ya!
Chipper
May 16 2007, 03:25
@<hidden> - I like the camo face paint! good retex!
@<hidden> - i am on msn, u can praise me more on there we dont want to get the mods mad
blackdog~
May 16 2007, 03:25
Chipper, I don't think I'm exaggerating when I say that I think you are well on your way to being the next BAS.
chipper ur gonne get executed with that face lol http://forums.bistudio.com/oldsmileys/tounge2.gif
here's puma after he went to TOM's TATTOOS..
http://i98.photobucket.com/albums/l265/Puma_010/photo.jpg
chipper hope u dont mind: I modded ur custom face abit:
http://i98.photobucket.com/albums/l265/Puma_010/armafacejv6.jpg
http://i98.photobucket.com/albums/l265/Puma_010/photo2.jpg
[21stSAS] Major
May 16 2007, 16:41
lol wipman, yer story brought a tear to my eye but i love the faces, but wat u got against the police anyway man?
and by the way i love all of yer balaclava faces so keep em coming eh, also is there anyway u could put all yer faces into a addon so they can be used in all servers like in the Swedish troops face pack?
and im not even going to ask about the abominations above http://forums.bistudio.com/oldsmileys/icon_rolleyes.gif
goodguyswearblack9
May 16 2007, 17:03
Could somebody please post a template of the default face so that I can work on it; I'm kind of new to this? Thanks!
Jack-UK
May 16 2007, 17:04
Most Attractive Face Award Goes To Chipper!
I love the female camo paint. http://forums.bistudio.com/oldsmileys/inlove.gif
Hi, well Major... i tryed with a config, to do my own custom faces
pack, and add 20 faces to it; sadly... i loosen that config, but it
don't worked, at least for me. As i don't have tool capable of
compress and uncompress ArmA.pbo files, i haven't try; but i'll like
to do my own faces pack, so it'll be usefull for players and mission
makers.
Off Topic Section:
I hate cops beacuse they're job is touch the balls of the civilians in
what should be a peacefull enviroment. The cops are a Necessary
Evil and we can't, we couldn't & we shouldn't get rid of those faszist
pigs.
Back On Topic:
I could made a .psd file with some elements (layers) but i can't
upload it to anywhere because ain't got a site were upload .rar
files or any other files; and upload it to YouSendIt.com will be
fair, only those that see the file during that week, will get it.
Those that get late... don't. Unfair and not equal. Let's C ya
[21stSAS] Major
May 17 2007, 15:11
ok m8, anyway the "FUCK THE POLICE" balaclava is cool with yer insignia but u cant see the writing cos of the helmets.
And could u possibly put some of yer amazing gloves and arms on this balaclava, preferably in the same pattern as the balaclava on the gloves? would be great http://forums.bistudio.com/oldsmileys/smile_o.gif Lets C'ya!
http://i100.photobucket.com/albums/m28/Vexx560/face34.jpg
And chipper how did u dress as a civi? was it in mission maker or sumthin?
Hi, there you have it Major, i hope that it likes you.
The Face:
http://img.photobucket.com/albums/v330/wipman/22thSASMajor.jpg
Let's C ya
[21stSAS] Major
May 17 2007, 17:43
ty m8 will check it out
TheReddog
May 19 2007, 04:27
I am like a total noob at Paintshop, so what I want to know is like if I supply front and side images of my ugly mug would one of you fine blokes be kind enough to make a custom face out of it?!?!!?
IronTiger
May 20 2007, 01:21
Hi all
@<hidden>
Your faces are awesome!
hey can u pleas send me the same face on (Poste May 10 2007,06:01) and (Poste: May 10 2007,03:22)
but only without that goves and this camo arms?
i hope thats ok for u http://forums.bistudio.com/oldsmileys/confused_o.gif http://forums.bistudio.com/oldsmileys/wink_o.gif
Hi, there has passed some time from the last camo face that i made,
so i've made a new one; i hope that you like it.
The Face:
http://img.photobucket.com/albums/v330/wipman/dejun.jpg
Which faces are you reffering to, iron tiger?, can you PM me the faces
names?, i don't save the .psd's or any other backup file of this faces,
i just do 'em, then i save 'em in .jpg, then i upload 'em to the site
where i upload my images... & then i come here to bore you with
this bullshit; so... i think that will be hard anyways, but try to
PM me anyway those faces links and i'll see what can i do.
Let's C ya
IronTiger
May 20 2007, 06:25
U have a PM
Thanks,
wika_woo
May 20 2007, 22:41
awesome lookin faces
http://forums.bistudio.com/oldsmileys/rofl.gif
Hi, I've edited my arma face.
You save it as face.jpg?.
Where exactly do you install it?.
wika_woo
May 20 2007, 23:23
No worries now, its sorted.
RL pic.
http://img503.imageshack.us/my.php?image=headci0.jpg
For when its War time baby!
http://img503.imageshack.us/my.php?image=arma2007052100114954cn1.png
http://forums.bistudio.com/oldsmileys/notworthy.gif
very nice dude, did u use ur own face for it???
[21stSAS] Major
May 21 2007, 06:30
puma....why do you think he posted a picture of himself as well? of course he used his own face!
Hi, 3 more faces on request:
One:
http://img.photobucket.com/albums/v330/wipman/onrequest.jpg
Two:
http://img.photobucket.com/albums/v330/wipman/onrequest_01.jpg
Three:
http://img.photobucket.com/albums/v330/wipman/onrequest_02.jpg
Before that anyone ask about... don't ask me to change the gloves
colour, add holes for the knukles, make the golves union point
match, add the sweater or a T-Shirt on the arms or put him
some socks like those that the german tourists wear when they
come to my "beloved" country with that ridiculous shape of pay
8€ for a damn Cruz Campo beer. Because that don't gonna happen.
Let's C ya
Major @<hidden> May 21 2007,08:30)]puma....why do you think he posted a picture of himself as well? of course he used his own face!
yeah sorry, im just spamming these threads http://forums.bistudio.com/oldsmileys/tounge2.gif http://forums.bistudio.com/oldsmileys/tounge2.gif
Opteryx
May 21 2007, 11:23
I would absolutely love it if someone could do Jamie Hyneman for me! I tried, but fail at photoshop very much http://forums.bistudio.com/oldsmileys/confused_o.gif
wika_woo
May 21 2007, 13:31
Major @<hidden> May 21 2007,08:30)]puma....why do you think he posted a picture of himself as well? of course he used his own face!
No need to stress dude, course it was my face.
http://forums.bistudio.com/oldsmileys/rofl.gif
whats the minimum Kb it has to be to used on multiplayer?.
@<hidden> opteryx, use Paintshop Pro 9, its much more simpler to use than Photoshop, good for noobs like us. http://forums.bistudio.com/oldsmileys/smile_o.gif
Major @<hidden> May 21 2007,08:30)]puma....why do you think he posted a picture of himself as well? of course he used his own face!
No need to stress dude, course it was my face.
http://forums.bistudio.com/oldsmileys/rofl.gif
whats the minimum Kb it has to be to used on multiplayer?.
@<hidden> opteryx, use Paintshop Pro 9, its much more simpler to use than Photoshop, good for noobs like us. http://forums.bistudio.com/oldsmileys/smile_o.gif
well some servers limit it to 200kb and for example SES server has 20kb limit. I allways keep the file at 40kb, but i think under 100 would be good. U can always put some other face on if server u want to join kicks u out.
[21stSAS] Major
May 21 2007, 14:41
lol ok puma no worries http://forums.bistudio.com/oldsmileys/biggrin_o.gif nice faces btw wipman love the new gloves, i know you told me not to pick but, the nose on the 3rd face down doesnt line up properly :P the only reason im mentioning it is because u have managed to do a face like that perfectly in the past http://forums.bistudio.com/oldsmileys/biggrin_o.gif
Hi, i know it Major, is that im tired of attend requests of something
that i don't like at all, and i did tohose 3 really quick, in like 40mins,
and... as i don't use 'em... well, i guess that you have an idea of
"how much" i care for the requests... i do what i can, but belive me
if i tell you that i don't gonna die doing it... .Let's C ya
ok here we go:
PVT.olavi:
http://i98.photobucket.com/albums/l265/Puma_010/face.jpg
http://i98.photobucket.com/albums/l265/Puma_010/t.jpg
That...is SOOOO CUTE! http://forums.bistudio.com/oldsmileys/biggrin_o.gif
Abs
PS: Wipman, can I get a Krusty the Klown face? And then after that, can you make a George W. Bush face?
Hi, Puma... man... you've to tell me where you buy those trippies
that you feed... because we don't have anything as good as those
down here. Good job on the bunny, hunt the hunters; that'll teach
'em. Let's C ya
[21stSAS] Major
May 21 2007, 16:52
ok m8 i understand, i wont ask for any more faces. and abs...why not think of something a little less gay. im sure wipman would just LOVE making a krusty the clown face http://forums.bistudio.com/oldsmileys/biggrin_o.gif
thank u the bunny is actually my little bunny called "olavi"
with little editing we could get a nice bunny camo, to hide from those predators around sahrani...
My contribution: Afganistan/Iraq SF out in the field for too long without shaving :P
http://img168.imageshack.us/img168/9791/facejn6.th.jpg (http://img168.imageshack.us/my.php?image=facejn6.jpg)
Hi, i've try to make a face with a crest, but i doubt that it matches
over the head model, i haven't try it in game:
The Face:
http://img.photobucket.com/albums/v330/wipman/desert.jpg
No camo and desert sleeve & gloves. Let's C ya
Unleashed2k
May 22 2007, 08:44
I would LOVE a jack bauer face..
anyone up for it?
[21stSAS] Major
May 22 2007, 16:07
ill test it out for ya wipman, i can be your sort of guinee pig http://forums.bistudio.com/oldsmileys/biggrin_o.gif
[21stSAS] Major
May 22 2007, 16:15
ok ive tested it out in civi skin so i can see the head. the hair lines up fine and the gloves are almost perfect. this face looks great on RACS cos of the desert camo arms
[21stSAS] Major
May 22 2007, 16:23
just to let ya know wipman. if u ever do more camo faces and want perfect gloves and arms then the ones on this face are exaclty right. maybe u could copy and paste from this? im not sure i dont use photoshop or wateva it is u use.
http://i100.photobucket.com/albums/m28/Vexx560/SkullCamo-1.jpg
http://forums.bistudio.com/oldsmileys/smile_o.gif Major, why not follow the forum rules and instead of posting three times in a row to increase your postcount, just edit your last post?
http://forums.bistudio.com/oldsmileys/smile_o.gif As well, why not let wipman speak for himself? Rushing to defend another man doesn't reek of the "gayness" you refer to at all. http://forums.bistudio.com/oldsmileys/whistle.gif
Abs
I did a face texture im using wich i want to keep for myself. it was derrived from hhl_52, but ingame the guys skin is like freaky bright:
Screen (http://img259.imageshack.us/my.php?image=arma2007052309494310aj0.jpg)
Anyone got a clue?
Hi, well Jahve... some people have complained about the same weird
thing to me, here... and in other forums; seems that some ATI users
have this problem or they don't see the face at all. It also may be
your monitor settings; when i choose a colour for make the camo,
on the RGB 8 colour profile of the Photoshop 9.0 CS, i choose a
really dark tone, in fact, almost black for the brown and some greens
too, but then when i begin to paint, it's like 3 times more clear than
the colour that i've selected. So that could be a reason, but ain't
got any clue really, sorry man. Let's C ya
@<hidden>: I did exactly the same thing and my skin is freakishly bright too.. Maybe it's because only the eyes were changed? (unless you changed something on the skin too?)
Eyes are apart of the texture aswell so i dont see why it should be like that. probably some odd thing with ATI drivers like wip says.
[21stSAS] Major
May 23 2007, 15:13
http://forums.bistudio.com/oldsmileys/smile_o.gif Major, why not follow the forum rules and instead of posting three times in a row to increase your postcount, just edit your last post?
http://forums.bistudio.com/oldsmileys/smile_o.gif As well, why not let wipman speak for himself? Rushing to defend another man doesn't reek of the "gayness" you refer to at all. http://forums.bistudio.com/oldsmileys/whistle.gif
Abs
ok, one there was no need to start a tiff here and two i dont really see where i "rushed to defend him"
[21stSAS] Major
May 23 2007, 15:21
and further more, i couldnt give two shits about my post count (lol see wat i did there http://forums.bistudio.com/oldsmileys/rofl.gif )
Major @<hidden> May 23 2007,17:21)]and further more, i couldnt give two shits about my post count (lol see wat i did there http://forums.bistudio.com/oldsmileys/rofl.gif )
You might not care about your post-count, maybe warning level boxes are more your taste http://forums.bistudio.com/oldsmileys/wink_o.gif
Edit your previous post next time when you have anything to add within such a short timespan please.
No point in creating a new topic for this, but I was just wondering what the max filesize for a custom face is..? In servers mine just comes up as white http://forums.bistudio.com/oldsmileys/huh.gif (works in SP though)
Jackal326
May 23 2007, 19:08
I think the game imposes a limit of approximately 100kb (for the sake of preventing lag when players with huge face (and custom sound) files connect to servers), but some servers impose a lower limit so the smaller the file the better, otherwise you will be kicked.
Hi, i think that the Kb limit, is 96.something Kb; at least... that was
what placebo said in it's day, when he released an ArmA face in .jpg
at a res of 1024x1024 . Is true that there're some public servers
that impose a limit in the custom files, in my opinion (concerning to
the custom faces) that's a pointless restriction that forces us to
renounce to the quality that you could add to your desired custom
face. Impose a Kb limit or just don't allow those stupid custom
sounds that some players use, is not a bad idea; most of the players
that i've seen using 'em, used 'em to annoy other players and just
to show how stupid a kid can be; but impose a Kb's limit in the
textures, is force the players to renounce to customize they're
game or to the quality and detail in a texture. This last two things
are a crime in my opinion. Let's C ya
spot on: I really like SES server, but its imbossible to join them with face file , becasue they limit it to 20kb. On the other hand logos and suchs are way bigger, and following this rule u would think 1 would ban the logos too. anyways my face.jpg is somewhere around 45kb, and seen a couple of servers kicking me out because of it. Some 1 needs to do a proper research if the face files trully add more lagg to the game or is it just a myth and ppl get paranoid
about 'em.
btw wipman: I use photoshop, so If u can help me with with my goggles, especially, how to make the lens transparent...
heres what i want to use:
http://i98.photobucket.com/albums/l265/Puma_010/01b.jpg
and this is where i've gotten so far(just need to figure out the transparency http://forums.bistudio.com/oldsmileys/banghead.gif ):
http://i98.photobucket.com/albums/l265/Puma_010/tm-1.jpg
Hi, well Puma, that should be easy, just place the goggles over the
face, resized to how they'll really be; then select the glass area that's
right over the skin (ONLY, over the skin, not over the internal side
of the goggles) paste the layers and done. But i think that you'll
look like as a damn mutant from outer space or from Ibiza with that
over the face; if i were you... i'll keep waiting for the 3D tools to
make the units raise & lower the goggles as BAS did in the OFP and
many others after that they did it for 1St time.
I've made another custom face, this time is for the Body Count fans
out there, "themed" on they're great 1St LP, the Cop Killer; banned
in the U.S. "thanks" to the PMRC & Tipper Gore among others.
So here it's:
Cop Killa:
http://img.photobucket.com/albums/v330/wipman/Cop_Killa.jpg
Enjoy it. Let's C ya
Hi guys.
Here's what i could come up with. I took Singapore's leader down to the dirty world of Arma.
http://i17.photobucket.com/albums/b93/Bereich/29621-Lee.jpg
http://i17.photobucket.com/albums/b93/Bereich/leeface03.jpg
I think the results were ok...
http://i17.photobucket.com/albums/b93/Bereich/leeface01.jpg
http://i17.photobucket.com/albums/b93/Bereich/leeface02.jpg
I wonder who i should do next.....
Shadow NX
May 24 2007, 11:11
Do a Rambo one so people can reenact Part4 when its out.... exept the gore offcourse http://forums.bistudio.com/oldsmileys/tounge2.gif
But seriously Sean Connery wouldnt be bad, then i can use him as Guba in a Nostalgic OFP style mission ^^
OR ( and thats probaly the one most people would like ) make a pack featuring the faces of the guys from Blackhawk down... Hoot and the others.
Think that one was pretty often used in the OFP era.
Hi, good job there, Broken; if i ever get killed by that piece of rotten
meat, or if i see it in my squad... i'll know for sure that's you; i never
seen anyone using an olds man custom face other than Guba. But
the face looks well adapted, a bit weird arround the nose... but
that's a very well done custom face, in my opinion. Let's C ya
P.S: Someone has noticed that the ArmA face no28 is the Samuel
L. Jackson's face?; has BIS paid him for use his face/image in
a game...?? or they're thiefs like me...?? >>;-)
@<hidden> wipman?
Piece of rotten meat? 0.0
I respect the guy for his past man.... http://forums.bistudio.com/oldsmileys/sad_o.gif
So here's Sylvester Stallone's WIP shots.
Nose is a bit effed up though.. then again... it's Stallone's nose...
http://i17.photobucket.com/albums/b93/Bereich/WIPstallone.jpg
http://i17.photobucket.com/albums/b93/Bereich/WIPstallone2.jpg
http://i17.photobucket.com/albums/b93/Bereich/WIPstallonetemplate.jpg
Doesnt look like him though... the reason's because Arma's player model head isnt the same as his.
What angle of shots would you need to make a quality ArmA face of a real person?
And could someone do one for a friend of mine? I said I'd make him a custom ArmA face but I kind of suck... Plus i dont have ArmA so cant test and tweak
@<hidden>
You'll need two shots - head on, and 45 degrees to the side (or maybe a profile would be better?)
The head on shot would be for the face and the profile shot would be for the jaw and ears. Combine together and tada.... a flattened frog pic that wraps around the model.
Strother
May 24 2007, 22:24
oh oh, do me next do me! I need to take a 45 degree angle picture
To all those whose faces seem overly bright, I have a Question, do you have an ATI Graphics card? I'm sure I read that it's something to do with that
wika_woo
May 24 2007, 23:08
To all those whose faces seem overly bright, I have a Question, do you have an ATI Graphics card? I'm sure I read that it's something to do with that
Mine does, but it was only a WIP just to show like.
I use a 7600GT card.
the colors aren't same in photosop and in-game, u just have to tuned so that it comes perfect(lots of reloading warning)
Hi, i've made two new faces.
Kevin Spencer:
http://img.photobucket.com/albums/v330/wipman/canadian.jpg
USMC Sniper:
http://img.photobucket.com/albums/v330/wipman/sniper_mask.jpg
I hope that you like 'em. Let's C ya
hedcrusha
May 25 2007, 15:51
Love your work wipman. By any chance could you release all the faces you have made into one pbo file like the SWM_Camofacepack?
heres mine with anti ballistic goggles:
http://i98.photobucket.com/albums/l265/Puma_010/pumabare.jpg
http://i98.photobucket.com/albums/l265/Puma_010/puma.jpg
thanx for info wipman, but I've been diong face with goggles just like that, but was wondering if I was was able to make goggles with transparency, so that the lenses look like glass lenses where u would be able to see the face underneath it.
d3dsh33p
May 25 2007, 17:40
http://www.myg0t.com/d3/d3/arma/faces/face.JPG
Took me like a week to perfect it
Hi, no hedcrusha, i had a config that a man sent me; but it don't
works with the classnames that i wanted, so i didn't a faces pack
for that reason. Let's C ya
Sgt Gul
May 25 2007, 20:16
Hi there can someone make a face painted with turkish flag? And how can i use that face in multiplayer? i have the downloaded version with patch 1.05
Hi, to use this faces or any other custom face you've to download
the face tou your Hard Drive and save it inside your:
"C:\Documents and Settings\USERNAME\My documents\ArmA"
and there, save the face texture as: face.jpg . run the game... and
have fun. Let's C ya
[21stSAS] Major
May 27 2007, 07:53
does anybody know how to get your AI to have the same custom face as you in MP? and can everybody else see it?
a step-by-step walkthrough would be great, ty! http://forums.bistudio.com/oldsmileys/biggrin_o.gif
Hi, for make the AI's use your same custom face in SP, will be just
writing the next line into the unit INIT BOX:
"this setface "custom";"
But i fear that in MP... each player will see it's own custom face in
case of have it... and if he haven't any custom face, then he'll get
back an error message (but im not sure on this last thing). One thing
is sure... the other players will not see the AI's as you see 'em, they'll
see 'em with they're own custom face, so every player will see a
diferent face in the AI's than you. Let's C ya
Curatalo
May 27 2007, 15:57
Wow! You guys are awesome at making custom faces.
Do you think maybe that you could make me a face?
All I want is a Turban on me,if its possible (I know it wont stick up in the air or anything)
Ty
Curatalo
[21stSAS] Major
May 28 2007, 08:45
ty wipman but where can i find this "init box" u speak of?
double click the unit u want on map, and there comes a screen where u can see the init box...
[21stSAS] Major
May 28 2007, 09:52
so ingame i press m for map then double click my squad member??? i think im doing it wrong that just places them marker things
not ingame, in the editor.
Ya Noob http://forums.bistudio.com/oldsmileys/biggrin_o.gif
[21stSAS] Major
May 28 2007, 11:31
lol ok, nobody told me!! i said step-by-step! http://forums.bistudio.com/oldsmileys/biggrin_o.gif
Hi, i've made two new faces with a partial wool's mask, one in black
wool and other in coyote tan wool; i hope that you like 'em.
In Game:
http://img.photobucket.com/albums/v330/wipman/MurphyBravo_IG.jpg
Black One:
http://img.photobucket.com/albums/v330/wipman/Murphy_Bravo.jpg
Desert One:
http://img.photobucket.com/albums/v330/wipman/Murphy_Delta.jpg
Let's C ya
[21stSAS] Major
Jun 4 2007, 18:39
very nice buddy will check em out
In ArmA, the Automatic Riflemen always have gloves on. Those gloves are pretty cool looking, does anyone have the skin from the game, or where I could find them? Someone posted a Face Pack with the group of all the faces, but they didnt have these gloves in them.
22Jacket
Jun 4 2007, 23:37
Hi, i have put my face jpg into all the relevant folders...when I go to edit my face in game I cannot find the custom face slot to use the face i have chosen....any ideas,,xxx http://forums.bistudio.com/oldsmileys/notworthy.gif
Hi, to use any custom face, it should be named: face and be a .jpg,
you should copy any of this faces and rename it and then... save
it into your:
"C:\Documents and Settings\USER\My documents\ArmA"
or...
"C:\Documents and Settings\USER\My documents\ArmA\Other Profiles"
and then go to the Player Edit menu and there... choose:
"Custom Face"
or something like that, i hope that you be able of make 'em work.
Let's C ya
Hi, i've made another face, this one will work in booth woodland &
dry enviroments, like the sabana, some mountain areas, near the
shores of many mediterranean countryes and well... arround there.
The Face:
http://img.photobucket.com/albums/v330/wipman/foxtrot_alpha.jpg
Let's C ya
G'day Wip,
Mate, can you please help me with something - got a little request - can you please make a face that uses Skins compression gear?
I tried to make this for the forearms:
http://www.skinsshop.co.uk/images/products/full/2006_SportSkins_Long_Sleeve_V_Neck_T-Shirt.jpg
...but couldn't get the hems on the wrist to line up properly...
If you get a minute, can you please have a go, Sir? I think it would fit nicely with the ACU guys and would be pretty authentic http://forums.bistudio.com/oldsmileys/smile_o.gif
heliosjet
Jun 6 2007, 10:36
wipman :
your "faces" are too small. Where can we download the original files?
Hi, well Stewy... i don't know what you're reffering to, my english is
not that good; do you want something that matches the ACU light
temperature?, the ACU colour...?, some kind of neopren (like the suits
of damn surfers and divers)?. Make things with patterns, match over
the arms is really hard and im too lazy as for do depending on what
kind of things; but if i'll understand better what you're reffering to,
i could try it. But forget about make a 23 pixels line in two colours
match over the arms mapping, i'll turn mad; and im already half mad,
so... well... "how could i say it...??" im lazy. Let's C ya
wipman :
your "faces" are too small. Where can we download the original files?
Aye .. a 1012x1024 format would be really nice http://forums.bistudio.com/oldsmileys/smile_o.gif
MfG Medicus
Hi, there're not any original files of the faces, Heliosjet; i save 'em
in 512x512 in the HD before upload 'em to the page that i use to
store graphics and then i delete those faces from the HD. I already
have my own custom face that i change from time to time when im
bored; but i don't give nothing about the custom faces that i do, i
do 'em because i got bored, not for any other reason. If i had more
money i'll not even touch the computer, i'll be partying all the day man. Let's C ya
heliosjet
Jun 6 2007, 11:10
no problem.
was just wondering why you don't do them in 1024x1024
Hehe, thanks Wip - yeah, Skins is a muscle compression shirt/pants that help with muscle recovery, etc...
I've heard of soldiers wearing them becuase they're warm, etc...
Thanks mate - a plain grey would do just fine http://forums.bistudio.com/oldsmileys/smile_o.gif
Hi, ok Stwewy, i think that i've seen some of those, but i though
that they were just silly pijamas for the silly men that used 'em, seems that (again) the silly it's me. Any thing "special" for the damn
face?, any haircut?, gloves?, scars...? don't ask for too much or
you'll get nothing, but i could do some things. Let's C ya
Quote[/b] ] Any thing "special" for the damn
face?, any haircut?, gloves?, scars...?
Nah mate, that's ok - I just use regular faces http://forums.bistudio.com/oldsmileys/wink_o.gif
Thanks Wip! http://forums.bistudio.com/oldsmileys/notworthy.gif
Hi, well Stewy... this is what i've get; i hope that it serves you, i
haven't try it in game; i only play with the John's Marines 1.3 when
im not online enjoying the team killers company, the sicker bad hardware
peromance, the lag, the disconnections, and those 3.000.000 of damn
bugs that still there making the online game "a new combat experience".
I hope that you like the face, it's for you... "baby...".
ACU "Pattern...!?":
http://img.photobucket.com/albums/v330/wipman/acujoke.jpg
Let's C ya
Hi, well Stewy... this is what i've get; i hope that it serves you, i
haven't try it in game; i only play with the John's Marines 1.3 when
im not online enjoying the team killers company, the sicker bad hardware
peromance, the lag, the disconnections, and those 3.000.000 of damn
bugs that still there making the online game "a new combat experience".
I hope that you like the face, it's for you... "baby...".
ACU "Pattern...!?":
]http://img.photobucket.com/albums/v330/wipman/acujoke.jpg[/img] (http://img.photobucket.com/albums/v330/wipman/acujoke.jpg[/img)
Let's C ya
wipman try 1.07b and johnnys marines replacement pack + evolution with it, ill quarentee it will make ur day http://forums.bistudio.com/oldsmileys/xmas_o.gif
btw wipman, what program u use to make those scarfs, and any tips u wanna give me???
i used this:
http://i98.photobucket.com/albums/l265/Puma_010/24534.jpg
with photoshop, but the outcome was pretty awful..
a tip for ya all, if u want tattoos on ur soldier, download tattoo fonts(google 'em) and have a blast http://forums.bistudio.com/oldsmileys/xmas_o.gif
roguewar85
Jun 7 2007, 18:18
Hi all !
Anyone knows how to assign a face to a unit ? I mean assigning a face by "default" to some unit in a way of creating characters with name etc (for a mod) !
I tried by editing the p3d in hexa and replacing the location of the faces textures inside, but it didn't work
Thanks
Roguewar
Hi, well Puma... the only advise that i can give is to use bigger and
squared textures; and the program that i use is the photoshop CS 9.
I haven't touched or even think in touch, the 1.07b+hotfix; i don't
touch anything that don't be an Alpha version; and... i also haven't
though in use any kind of replacement pack, mod, addon or whatever;
ain't like that kind of things, if the game is plaged of bugs rightnow...
there's no beta that can fix that; this is not the OFP when the 1St
beta out by BIS was the 1.81 and a beta that wrecks the 2D sights
is not just what im waiting for, i don't know what they're doing or
why; but ain't like what i've seen until now. So no betas or mods
allowed here. Let's C ya
Thanks Wip http://forums.bistudio.com/oldsmileys/biggrin_o.gif looks great mate
Much appreciated! http://forums.bistudio.com/oldsmileys/biggrin_o.gif
Here's my face.jpg - I actually used a photo of myself to create it, but it doesn't look much like me in-game http://forums.bistudio.com/oldsmileys/confused_o.gif . I guess it's because of the wrong head shape.
http://www.vigilant-wolves.de/files/maddogx.face.jpg
Hi, relation of size between your face/head and the ArmA head
model is very important, those with long face and a small head, like
me; can't import our face to the ArmA. But, in you case, if the texture
is as bright as i see it there, im sure that it must not look good in
game. A solution could be to do a dark brown layer above the whole
texture, cut off the parts like the eyes, the mouth intern, the hair,
and that kind of things; the nose and ears holes too. And then...
play with the trasparency of that dark brown layer until that you find
a skin colour that looks close enought to yours and that you think
that will look good enough in game.
That's what i'll do reffering to the colour, about the head size...
maybe take a trip to chernovil and "with luck", my head will grow
in size; chernovil... moruroa... the nevada desert... the camchatka
peninsula... i don't know, that's the only possible solution for that. Let's C ya
Hi, relation of size between your face/head and the ArmA head
model is very important, those with long face and a small head, like
me; can't import our face to the ArmA. But, in you case, if the texture
is as bright as i see it there, im sure that it must not look good in
game. A solution could be to do a dark brown layer above the whole
texture, cut off the parts like the eyes, the mouth intern, the hair,
and that kind of things; the nose and ears holes too. And then...
play with the trasparency of that dark brown layer until that you find
a skin colour that looks close enought to yours and that you think
that will look good enough in game.
That's what i'll do reffering to the colour, about the head size...
maybe take a trip to chernovil and "with luck", my head will grow
in size; chernovil... moruroa... the nevada desert... the camchatka
peninsula... i don't know, that's the only possible solution for that. Let's C ya
Actually the texture color is perfect, because I do have very light skin. (The sun an evil monster is. Hide from it we must! http://forums.bistudio.com/oldsmileys/wink_o.gif )
In general the texture fits onto the head very well, mainly because I spent about 2 hours trying to get it right.
I bet if BI would give us the option of slightly adjusting the head size on all 3 axes (x,y,z), we could make our heads more realistic. I guess that's a bit too RPG-ish though.
roguewar85
Jun 8 2007, 09:05
Hi all !
Anyone knows how to assign a face to a unit ? I mean assigning a face by "default" to some unit in a way of creating characters with name etc (for a mod) !
I tried by editing the p3d in hexa and replacing the location of the faces textures inside, but it didn't work
Thanks
Roguewar
I found the solution finally http://forums.bistudio.com/oldsmileys/biggrin_o.gif
Hi, i've made another custom face for all my good fellas out there
(i don't mean [this time] the absolut vodka or the SWE porno movies)
i've made the cover & sleeve texture out of the best M90 BDU photo
that i've found, with a better texture, of the rip stop M90 BDU, i'll
had made it better (i think); i hope that you like it.
The Face:
http://img.photobucket.com/albums/v330/wipman/sweirdo.jpg
Let's C ya
Sgt Gul
Jun 11 2007, 16:10
guys, anyone. Can someone make a face with the Turkish flag? Like 2 small flags on both sides of face, or a face complete red with the star and moon typical turkish flag. And one with camouflage face with sunglasses. I would really appreciate it/ http://forums.bistudio.com/oldsmileys/smile_o.gif
wipman do you use a psd template file for the facemasks and arms etc so you can just go back and change something without having to redo the selections?
If so, could you possibly send it to me?
Thanks
Hi, yeah man, i was tired have to redo the 35 main elements of each
damn custom face, so now i've a fixed .psd as starting point with
all the layers of each thing, most names in english, unless of those
things that i don't know they're damn name in english; but only God
knows how many Mb that damn .psd weights. PM me a bloody mail
and i'll send you by YouSendIt the .psd into a .rar file ever that you
promise me that you'll not share it arround there unless with your
girlfryend/boyfryend and your damn fellas, k?. Let's C ya
Private Message sent with details enclosed.
SniperRedFox
Jun 12 2007, 15:46
I know you've all said that custom faces become pale because they are over 100kb, but I saved mine, and it is 18kb, yet still shows up white/pale.
Hi, another custom face, this time... cover and camo + sweater.
The Face:
http://img.photobucket.com/albums/v330/wipman/CoverAndCamo.jpg
#SniperRedFox, that must be because you have an ATI graphic card,
seems that the ATI users have problems with the custom faces,
that's a thing with the current ATI drivers, or that's what many
people say, so we can't do nothing about, the only solution is hope
that in future releases of the ATI drivers, that thing be solved. Let's C ya
someone please do Che guevara!!!
Big Nasty
Jun 14 2007, 00:09
What software do I use to decrypt the paa files into a format I can then edit and vie versa?
http://img.photojerk.com/Rayven/face.jpg
Heres one of mine that I made using wipmans template and scanned textures of a pair of DPM Pants that I own
I'd love to see a screeny of what it looks like on a system that has a non ATI Card
Hi, i've try it and it looks very darkness, i guess that will serve better
for the SLA side than for the yankees or the rebels; this is how it
looks with my GF7600 GT:
In A USMC Grenadier. (http://img.photobucket.com/albums/v330/wipman/AKJ_Face.jpg)
Let's C ya
Paul-Hewson
Jun 14 2007, 10:17
I get an error message when trying to use some of the face i found here
That says
Quote[/b] ]image : c:\documents&settings\arma\......\face.jpg dimensions 320*320 not 2^n
What does that mean ? I understand it is a dimension problems, but i don't know how face work so i don't know what to do :/
Hi, i didn't that custom face for sure; the error may be (i'll bet my
soul on that) that the error is that 320x320 is something that the
game can't recognize. Resize it to 256x256 or to 512x512 and it
gonna work for sure. Let's C ya
Hi, i've try it and it looks very darkness, i guess that will serve better
for the SLA side than for the yankees or the rebels; this is how it
looks with my GF7600 GT:
In A USMC Grenadier. (http://img.photobucket.com/albums/v330/wipman/AKJ_Face.jpg)
Let's C ya
Thanks wipman, the face that you see is nothing like what I see thanks to the ATI Overbright bug thingy.
Paul-Hewson
Jun 14 2007, 20:23
Thanks for the tips, it works now.
Noone skin female faces ?
Like this guy
http://www.flashpoint1985.com/cgi-bin....t=59068 (http://www.flashpoint1985.com/cgi-bin/ikonboard311/ikonboard.cgi?act=ST;f=73;t=59068)
(i am trying to contact him, but he is like a ghost http://forums.bistudio.com/oldsmileys/crazy_o.gif )
hello all,
why not put some drop shadow on the top of the facemask to make it a bit more 3d? that way it should look more sarf like.
Let me know of that psd location and ill try to show you what i mean.
rgds
LoK
ps I'll knock up a feminine face, but she's gonna look butch, or like a very pretty boy due to model shape.
Will prob be after weekend, as im working nights all W/E.
horrid lady face test (http://www.unit2k.com/Untitled-2.jpg) here's a quick one, face is a bit unscaled and no body features.
Hi, i don't know what you mean Orlok, due to my "good" english level;
but that face .psd file into a .rar can be found in:
http://www.armedassault.eu
in the forums, it'll still be there for some days, i think that until the
monday or so. Let's C ya
Paul-Hewson
Jun 15 2007, 11:07
hello all,
why not put some drop shadow on the top of the facemask to make it a bit more 3d? that way it should look more sarf like.
Let me know of that psd location and ill try to show you what i mean.
rgds
LoK
ps I'll knock up a feminine face, but she's gonna look butch, or like a very pretty boy due to model shape.
Will prob be after weekend, as im working nights all W/E.
horrid lady face test (http://www.unit2k.com/Untitled-2.jpg) here's a quick one, face is a bit unscaled and no body features.
I can't see the image. Wrong url ?
Hello all
I was lying in bed this morning and realised how awful that first test is.
So if you cant see it, dont worry, youre not missing anything!
Ill do a proper one after the weekend.
@<hidden>:
Thanks for pointing out the psd file, i'll download and show you what i mean http://forums.bistudio.com/oldsmileys/smile_o.gif
Rgds
LoK
Ps
here's a quick test
needs more shadows on cheekbones and of course needs to have the hairy arms/legs etc. removed http://forums.bistudio.com/oldsmileys/smile_o.gif
Also, face needs proper time to blend in, but hey its a 5 min job!
I've scaled it down to half size due to forum restrictions.
http://www.unit2k.com/face.jpg
Paul-Hewson
Jun 15 2007, 18:07
Ok http://forums.bistudio.com/oldsmileys/tounge2.gif
Thanks ! http://forums.bistudio.com/oldsmileys/notworthy.gif
5 mins of good work.
If i use it for game like this, she's gonna work ?
hello there
yes she/he/it should work as is.
Just download and put into your profile folder, the select the custom face option ingame.
rgds
LoK
http://www.unit2k.com/face2.jpg
here's a low low low quality version of the wipman template with slight shadow and highlighting on facemask to make it look a little more 3d. not tested yet, so criticism welcome.
rgds
LoK
ps oops just realised effect isnt on nose patch so may look a little odd. again anothr 3 mins work
gumby123
Jun 16 2007, 03:06
not bad, they look pretty good
i have little question, ive created my first custom face and looks quite nice: [Hannibal OLD]
http://img70.imageshack.us/img70/4131/kopiafaceiy5.th.jpg (http://img70.imageshack.us/my.php?image=kopiafaceiy5.jpg)
but 2nd one is totally different ingame : [AL]
http://img70.imageshack.us/img70/5057/faceke2.th.jpg (http://img70.imageshack.us/my.php?image=faceke2.jpg)
any ideas what should i change ?
Hi, i've made a lower face mask, with leopard skin arms; for the psychobillys
out there, i haven't try it in game so i don't know how it look like. But i like
the leopard skin, that was made by PSC for his OFP dunne buggys pack.
The Face:
http://img.photobucket.com/albums/v330/wipman/Leopard_A2.jpg
Also i've made a custom face using the great looking face mask made by:
Hit_Sqd_Ack, and look like this:
The Face:
http://img.photobucket.com/albums/v330/wipman/Mask_Try.jpg
Let's C ya
Could someone give me a quick rundown on:
1) Where I find the tempate to make these changes
2) What program to use to make the changes
3) And short description HOW to make the changes.
Thanks!!
Hi
Quote[/b] ]1) Where I find the tempate to make these changes
2) What program to use to make the changes
3) And short description HOW to make the changes.
1) In Armedassault.eu
2) Adobe Photoshop (i used the CS 9.0, but any lower, cheaper
version will serve too).
3) Just play with the effects, colours & tools; is not that hard.
That's the best advice that i can give you.
Let's C ya
Shadow NX
Jun 18 2007, 09:23
i have little question, ive created my first custom face and looks quite nice:
any ideas what should i change ?
The second one has not enough contrast especially cause many ArmA textures are painted it wont match up.
Id say try raise the contrast and play with the brightness and if it gets too strong coloured work with hue and saturation sliders.
Cant try atm cause im at work but that should do the job.
[21stSAS] Major
Jun 18 2007, 15:17
hey wipman. liking that last face u did wiv the camo face and grey gloves but just 2 let ya know the nose doesnt line up with the mask
Paul-Hewson
Jun 18 2007, 21:23
Hello all
I was lying in bed this morning and realised how awful that first test is.
So if you cant see it, dont worry, youre not missing anything!
Ill do a proper one after the weekend.
@<hidden>:
Thanks for pointing out the psd file, i'll download and show you what i mean http://forums.bistudio.com/oldsmileys/smile_o.gif
Rgds
LoK
Ps
here's a quick test
needs more shadows on cheekbones and of course needs to have the hairy arms/legs etc. removed http://forums.bistudio.com/oldsmileys/smile_o.gif
Also, face needs proper time to blend in, but hey its a 5 min job!
I've scaled it down to half size due to forum restrictions.
I know it is not the final version that you gave me, but well here something i see on her arms
http://www.zimagez.com/miniature/womanbug.jpg (http://www.zimagez.com/zimage/womanbug.php)
That is my feedback, the skin still cool. Don't imagine how you can improve it, but well i trust you ! http://forums.bistudio.com/oldsmileys/smile_o.gif
Hi, that fully masked face with the padded gloves, the sweater and
the camoed mask, is not made by me; It Was Made By: Hit_Sqd_Ack.
I only added the camo & the sweater on it, but that's the only thing
that i did there, Major. Let's C ya
hello there,
ahh thats due to the fact that the arm/hand textures are not "smudged" into the background colour enough, so the standard background shows through.
I will (hopefully!http://forums.bistudio.com/oldsmileys/wink_o.gif do some proper skins tonight for your enjoyment and critisism http://forums.bistudio.com/oldsmileys/smile_o.gif.
Oh thanks for the feedback btw!
rgds
LoK
Paul-Hewson
Jun 19 2007, 14:15
Thanks to you for the skin. I don't have the skill to do that http://forums.bistudio.com/oldsmileys/wink_o.gif
Hit_Sqd_Ack
Jun 20 2007, 03:12
Here is the basic face, I don't have time to mess with the nose but when I get a day off from work in a couple weeks I'll have a look into it.
http://i204.photobucket.com/albums/bb106/ack2007/facegrey.jpg
Hey Wipman, this is based loosly off of your original mask. I made this for my Bank Robber Pack that should be out shortly. Love your stuff bud, ttyl. - Ack
http://i204.photobucket.com/albums/bb106/ack2007/face.jpg
Paul-Hewson
Jun 20 2007, 18:07
Here is an ingame screen of orlok's female face.
http://www.zimagez.com/miniature/femaleface.jpg (http://www.zimagez.com/zimage/femaleface.php)
[21stSAS] Major
Jun 20 2007, 20:45
lmao. looks more like michael jackson than a "female".
Nice "Robber Face" Hit_Sqd_Ack but the file is too large (over 100 KB) and so wont work in mutliplayer. is ther any way of reducing the size??
Paul-Hewson
Jun 20 2007, 21:15
Major @<hidden> June 20 2007,22:45)]lmao. looks more like michael jackson than a "female".
Nice "Robber Face" Hit_Sqd_Ack but the file is too large (over 100 KB) and so wont work in mutliplayer. is ther any way of reducing the size??
Resize it to 256*256
[21stSAS] Major
Jun 20 2007, 21:18
thnx but i found a far easier way to do it. open it with paint then save it. then its like 35kb without doing anything! weird huh
Paul-Hewson
Jun 20 2007, 21:38
Maybe he choose quality=100 ?
Ah yeah, wrong read. Paint is crap for image quality.
May i suggest ya Paint.net , it's better than paint and freeware.
Hi, when i finish any of the custom faces that i've made, they don't
take more than 63Kb once in .jpg, but... once in the HD... take like
between 10 & 17Kb more, and when i upload it to internet... they
gain other 10 or 15Kb. I don't know how the compression works, but
that "small thing" costed me my last warning level. That they wont
go down because the same rules applyed for the rest, are not the
same forum rules applyed to me; "don't ask me why...". Let's C ya
BloodOmen
Jun 21 2007, 11:47
Following Wipmans and ShadowNX's Advice. I attempted a new face:
http://img374.imageshack.us/img374/8004/faceut1.jpg
I used textures from Google searching things like Camo T-shirt / Gloves etc.
What you think. Please Critizise can advise http://forums.bistudio.com/oldsmileys/wink_o.gif
Oh heres another one that i done in around 5 mins. But i still like it http://forums.bistudio.com/oldsmileys/whistle.gif
http://img376.imageshack.us/img376/5287/face5rm3.jpg
Hi, don't look bad at all, but keep in mind that if that's a mask, it
shouldn't be transparent, and the gloves... remind me to the gloves
that madona used in the 80's; and i think that this days too... ;
i'll had added a small shadow for mark the uper side of the holes
in the arms sleeve. And i also will not have the choosen the spanish
army camo, as a good fella says "army is an Acronim for: Marines.
And means that you're not good enought yet." Also i think that the
camo part over the nose wont gonna align well with the nose, you've
left an uncovered line in the left side of the nose (our left, as we see the texture; that's mirrored). But well... is a begining... keep
playing and you'll discover more fun things. Let's C ya
Hi, hey BloodOmen; go to Armedassault.eu, to the forums, there
you've a .psd into a 5.10Mb .rar file where you can see better how
i did/do the camo painted faces; this time the .psd have the layers
in folders (Gloves, Sleeve), english names again for all what i know
it's english name... & spanish names for what i don't know it's name
in english. Enjoy it. let's C ya
BloodOmen
Jun 21 2007, 12:56
Awesome thanks man.
Ill use your advice, and ill have a look at this PSD. Downloading now.
Ill post my results after ive examined it and played with it abit http://forums.bistudio.com/oldsmileys/wink_o.gif
BloodOmen
Jun 21 2007, 15:20
Okay heres another face:
http://img354.imageshack.us/img354/8089/camo1dp8.jpg
Critizise and suggest.
hello all,
eww, just saw the scrreny of me last WIP female.
Looks awful dont it?
Ok off to work on another now http://forums.bistudio.com/oldsmileys/smile_o.gif
Ok Im going to up the file as i work on it, so it'll always be on this "filename"
Firstly Here's a "blank template"
Rgds
LoK
http://www.unit2k.com/face.jpg
Can anyone do a camo face that looks like this:
http://www.fas.org/man/dod-101/sys/land/camo-react-ride.jpg
Hi, i think that i've made one that looks closer to that scheme, Mabes.
But you'll have to surf between here and the armedassault.eu forums
to find it. Let's C ya
BloodOmen
Jun 21 2007, 20:03
New Face:
http://img358.imageshack.us/img358/7641/faceaj0.jpg
Followed advice from wipman (Great help) his PSD was also very helpful in learning how to do the coloured layers.
Again Critizise and advise http://forums.bistudio.com/oldsmileys/biggrin_o.gif
Paul-Hewson
Jun 21 2007, 21:35
hello all,
eww, just saw the scrreny of me last WIP female.
Looks awful dont it?
Ok off to work on another now http://forums.bistudio.com/oldsmileys/smile_o.gif
Ok Im going to up the file as i work on it, so it'll always be on this "filename"
Firstly Here's a "blank template"
Rgds
LoK
http://www.unit2k.com/face.jpg
As always i'll do the feedback.
Here what she looks for now.
http://www.zimagez.com/miniature/sexyladyinthearmy.jpg (http://www.zimagez.com/zimage/sexyladyinthearmy.php)
Jackal326
Jun 21 2007, 22:56
Even the best face texture in the world isn't going to change the fact that, barring the nose, she has the same facial structure as Sylvester Stallone...we need an edited model, maybe someone could experiment with 3DX-Ripper and get an open-source unit model on the go, complete with selections, so someone could throw a feminine head on it.
Paul-Hewson
Jun 21 2007, 23:15
DieAngel made two beautiful one.
You can see them here :
http://www.flashpoint1985.com/cgi-bin....t=59068 (http://www.flashpoint1985.com/cgi-bin/ikonboard311/ikonboard.cgi?act=ST;f=73;t=59068)
The second one is really beautiful. But DieAngel never respond since he post them. So i am waiting..
But Orlok is making nice work too.
BloodOmen
Jun 22 2007, 00:47
A really bad Asian (done in 5 mins)
http://img382.imageshack.us/my.php?image=firstasianea1.jpg
http://img96.imageshack.us/img96/4088/firstasian2kx2.jpg
http://img477.imageshack.us/img477/9739/firstasian3pv9.jpg
My face after a few hundred cans
http://sas.ogn.com.au/images/myface.jpg
[21stSAS] Major
Jun 22 2007, 06:19
My face after a few hundred cans
http://sas.ogn.com.au/images/myface.jpg
lol scary http://forums.bistudio.com/oldsmileys/crazy_o.gif did u use the balaclava face from the SWM Camo pack?
Yeah think it was from that pack, Gunna change the nose and try to retexture the balaclava
A really bad Asian (done in 5 mins)
http://img382.imageshack.us/my.php?image=firstasianea1.jpg
http://img96.imageshack.us/img96/4088/firstasian2kx2.jpg
http://img477.imageshack.us/img477/9739/firstasian3pv9.jpg
http://granq.se/files/vte/vc.jpg
second one.
BloodOmen
Jun 22 2007, 11:29
lol, he looks better than mine already http://forums.bistudio.com/oldsmileys/yay.gif
The first two asian men on sahrani http://forums.bistudio.com/oldsmileys/pistols.gif
New Face:
http://img474.imageshack.us/img474/8343/face2vb3.jpg
Enjoy ! !
Again Critizise and Advise http://forums.bistudio.com/oldsmileys/wink_o.gif
[21stSAS] Major
Jun 22 2007, 14:53
that asian is pretty good granQ but the nose dont look that great. Guys lets get some more balaclava faces on ere! i love em!
Hit_Sqd_Ack
Jun 23 2007, 04:50
http://i204.photobucket.com/albums/bb106/ack2007/face-1.jpg
http://forums.bistudio.com/oldsmileys/whistle.gif
[21stSAS] Major
Jun 23 2007, 08:19
good face hit sqd Ack but remember, when making a balaclava that covers up the mouth u should cover up the mouth section also (top left) so that it doesnt appear red when he speaks.
I changed it http://forums.bistudio.com/oldsmileys/wink_o.gif
http://i100.photobucket.com/albums/m28/Vexx560/face.jpg
[21stSAS] Major
Jun 23 2007, 08:23
got a request ere..could u possibly do this face
http://i100.photobucket.com/albums/m28/Vexx560/Balaclava16.jpg
but with the same mouth section as this face?
http://i100.photobucket.com/albums/m28/Vexx560/Balaclava17.jpg
might not even be possible but would appreciate it!
Hit_Sqd_Ack
Jun 23 2007, 14:37
Major just cut out the mouth and paste it into the other one. It should take you 2 mins with photoshop.
-Ack
Major @<hidden> June 22 2007,16:53)]that asian is pretty good granQ but the nose dont look that great. Guys lets get some more balaclava faces on ere! i love em!
actually, 99% of the vietnamese people look like this, its just the ones on tv, photos are the ones that could afford a nose job.. really...
seriously, not much can do since can't change the face right now.
this are "repainted" faces from vte ofp release, will try copy over most of the vc faces to use with our ArmA release.. so hopefully not so far away.
[21stSAS] Major
Jun 23 2007, 16:16
Major just cut out the mouth and paste it into the other one. It should take you 2 mins with photoshop.
-Ack
yea i could do that but A) i dont have photoshop B) i cant be assed to dl it and C) im sure id do a shit job http://forums.bistudio.com/oldsmileys/biggrin_o.gif
TrunkzJr
Jun 23 2007, 17:09
Sharingan Eyes [From Naruto]
http://img355.imageshack.us/img355/1179/face1zj5.jpg
http://img253.imageshack.us/img253/8992/sharinganwg8.jpg
http://yasmin.k.free.fr/Naruto/sharingan.jpg
Im sorry for this post, I accidentaly hit Post!
BloodOmen
Jun 24 2007, 00:04
Dude you could make it more like naruto if u added things like the bandanda and change the hair colour.
@<hidden>
How do you make those balaclava faces ?
At minite all i can do it camo and well very low quality balaclavas http://forums.bistudio.com/oldsmileys/biggrin_o.gif
[21stSAS] Major
Jun 24 2007, 07:14
Dude you could make it more like naruto if u added things like the bandanda and change the hair colour.
@<hidden>
How do you make those balaclava faces ?
At minite all i can do it camo and well very low quality balaclavas http://forums.bistudio.com/oldsmileys/biggrin_o.gif
id of thought that balaclavas would be easier to make than camo faces http://forums.bistudio.com/oldsmileys/confused_o.gif seens all u have to do is leave a hole over the eyes and mouth (or watever variation of the two) but ask Wipman.Hes a leged when it comes to balaclavas i have 18 of his in a folder. And many camo faces too. Luuuuuvvvv uuuu wiiiippppmmmaaannnnxxxx http://forums.bistudio.com/oldsmileys/inlove.gif
Hell Face http://forums.bistudio.com/oldsmileys/smile_o.gif
http://img171.imageshack.us/img171/7442/faceje9.th.jpg (http://img171.imageshack.us/my.php?image=faceje9.jpg)
http://img224.imageshack.us/img224/9231/facepiclw7.th.jpg (http://img224.imageshack.us/my.php?image=facepiclw7.jpg)
He seems to starve for blood. http://forums.bistudio.com/oldsmileys/crazy_o.gif
Hit_Sqd_Ack
Jun 24 2007, 12:15
Nice Gigan, looks like the guy from KOTOR.
- Ack
http://xboxmedia.gamespy.com/xbox/image/kotorII_4t_1089852855.jpg
wika_woo
Jun 24 2007, 13:42
Hell Face http://forums.bistudio.com/oldsmileys/smile_o.gif
http://img171.imageshack.us/img171/7442/faceje9.th.jpg (http://img171.imageshack.us/my.php?image=faceje9.jpg)
http://img224.imageshack.us/img224/9231/facepiclw7.th.jpg (http://img224.imageshack.us/my.php?image=facepiclw7.jpg)
He seems to starve for blood. http://forums.bistudio.com/oldsmileys/crazy_o.gif
LOL..
How did u make t-shirts?..
Plus you should make a Terminator! http://forums.bistudio.com/oldsmileys/pistols.gif
The civilian unit has worn "Hammer of Doom" t-sheet from the default.
This t-sheets is suiting to this face. http://forums.bistudio.com/oldsmileys/biggrin_o.gif
Terminator seems to be interesting.
Hi, i've made another custom face, it have a USMC Force Recon
patch over the gloves, i hope that you like it.
The Face:
http://img.photobucket.com/albums/v330/wipman/FR_MF.jpg
Let's C ya
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.