Load texture probs with o2

[gore]

I cant get any textures to appear in o2. i folowed vixers tutorial selected the pollies, pressing "A" to select the area where the picture has to show up, and then i right click and selected load texture,   1. does the texture have to be in a certin place? 2. It is already a supported size (512x512), 3. Does it have to be gif or tga or can it be pac? because nothing appears and when i press "B" it says theres no texture loaded http://www.flashpoint1985.com/ikonboard301/iB_html/non-cgi/emoticons/confused.gif What am i doing wrong?

By the way the topic "Tex prob" didnt answer my duestions

[Prospero]

Hmmm difficult to know what you're doing wrong...

1) No, not as far as Buldozer is concerned.

2) 512x512 is ok (1:1). You can also have rectangular textures in 1:2 or 2:1 ratio - 512x1024 or 1024x512.

3) Personally, I use the Texview program to convert all my textures to .paa format first. Only then do I use them in O2. This isn't necessary, but it's one way of doing it. One good trick it to ensure you can open your .paa in Texview AFTER you have created it. This serves as a good check that it's valid.

Prospero

[SilverBullet]

Read this thread:
http://www.flashpoint1985.com/cgi-bin....ac2pall (http://www.flashpoint1985.com/cgi-bin/ikonboard301/ikonboard.cgi?act=ST;f=47;t=20041;hl=pac2pall)

There are some fixes in there that worked for other people... not all tho (i still have the same problem). Good luck....

[gore]

well i did lots of things and one of them must have worked thanks for the info http://www.flashpoint1985.com/ikonboard301/iB_html/non-cgi/emoticons/wink.gif